[E1000-devel] FWD: Tromper n’est pas mal, c’est juste la vie

2016-12-07 Thread Sylvie
Salut à tous ! Il parait que 81 % des hommes sont infidèles dans leur mariage, et 54% des femmes. En fait pour les femmes, il y en aurait plus, mais elles ne le disent pas, à cause de l’image encore négative de l’adultère féminin. C’est normal : le mariage et l’adultère vont ensemble. L’hypoc

Re: [E1000-devel] ixgbe Port cannot load, "failed to register GSI"

2016-12-07 Thread Alexander Duyck
On Tue, Dec 6, 2016 at 3:22 PM, Ben Greear wrote: > We put 3 10-g dual-port ixgbe NICs and 4 4-port I350 NICs in a 2U rackmount, > and one of the ixgbe ports > fails to come up. This previously worked before reboot, so maybe it is a > race somehow. Kernel is 4.4.11+, > but not hacks to ixgbe or

Re: [E1000-devel] ixgbe port missing, "PCI INT B: failed to register GSI"

2016-12-07 Thread Rustad, Mark D
Ben Greear wrote: I forgot to mention earlier, we have 4 x 4-port NICs in here too, so likely we are pushing the IRQ resources. Any way to configure the NICs to use fewer IRQ resources and still perform at least moderately well? And two 1G ports on the mobo as well! If you look at the ig

Re: [E1000-devel] ixgbe port missing, "PCI INT B: failed to register GSI"

2016-12-07 Thread Ben Greear
On 12/07/2016 10:17 AM, Rustad, Mark D wrote: > Ben Greear wrote: > >> I forgot to mention earlier, we have 4 x 4-port NICs in here too, so likely >> we are pushing >> the IRQ resources. Any way to configure the NICs to use fewer IRQ resources >> and still >> perform at least moderately well? >

Re: [E1000-devel] ixgbe port missing, "PCI INT B: failed to register GSI"

2016-12-07 Thread Rustad, Mark D
Ben Greear wrote: Thanks for the diagnosis. The purpose of this system is to act as a network traffic generation test system, and we do not expect full line-rate throughput on all ports concurrently. We do see nice throughput over-all on this sytem (in previous boots we tested all NICs co

Re: [E1000-devel] ixgbe port missing, "PCI INT B: failed to register GSI"

2016-12-07 Thread Jesse Brandeburg
On Tue, 6 Dec 2016 17:24:18 -0800 Ben Greear wrote: > On 12/06/2016 05:15 PM, Fujinaka, Todd wrote: > > Attachments don't work here. You'll have to file a bug on sourceforge, or > > file an IPS for factory support (and tell me the number so it doesn't sit). > > > > Ok, here it is inline then

Re: [E1000-devel] ixgbe port missing, "PCI INT B: failed to register GSI"

2016-12-07 Thread Ben Greear
On 12/07/2016 11:00 AM, Rustad, Mark D wrote: > Ben Greear wrote: > >> Thanks for the diagnosis. >> >> The purpose of this system is to act as a network traffic generation test >> system, and we >> do not expect full line-rate throughput on all ports concurrently. We do >> see nice throughput o

Re: [E1000-devel] [PATCH 1/1] ixgbe: write flush vfta registers

2016-12-07 Thread Lino Sanfilippo
Hi Zhu, On 07.12.2016 04:05, zhuyj wrote: > After several week tests, your advice still make this bug appear. But > my patch make this bug disappear. > > Zhu Yanjun > In your commit message you wrote "Sometimes vfta registers can not be written successfully in dcb mode." Do you mean that the w

Re: [E1000-devel] ixgbe port missing, "PCI INT B: failed to register GSI"

2016-12-07 Thread Ben Greear
On 12/07/2016 11:03 AM, Jesse Brandeburg wrote: > On Tue, 6 Dec 2016 17:24:18 -0800 > Ben Greear wrote: > >> On 12/06/2016 05:15 PM, Fujinaka, Todd wrote: >>> Attachments don't work here. You'll have to file a bug on sourceforge, or >>> file an IPS for factory support (and tell me the number so i

Re: [E1000-devel] ixgbe port missing, "PCI INT B: failed to register GSI"

2016-12-07 Thread Ben Greear
On 12/07/2016 10:23 AM, Ben Greear wrote: > On 12/07/2016 10:17 AM, Rustad, Mark D wrote: >> Ben Greear wrote: >> >>> I forgot to mention earlier, we have 4 x 4-port NICs in here too, so likely >>> we are pushing >>> the IRQ resources. Any way to configure the NICs to use fewer IRQ >>> resource

Re: [E1000-devel] ixgbe port missing, "PCI INT B: failed to register GSI"

2016-12-07 Thread Rustad, Mark D
Ben Greear wrote: The blacklist option worked. I blacklisted both ixgbe and igb, and then added a pre_network init.d script that runs before the 'network' target. This script loads ixgbe, waits 2 seconds, loads igb. I now see all network devices registered. This is quite a bit of a hac

Re: [E1000-devel] ixgbe port missing, "PCI INT B: failed to register GSI"

2016-12-07 Thread Rustad, Mark D
Ben Greear wrote: The blacklist option worked. I blacklisted both ixgbe and igb, and then added a pre_network init.d script that runs before the 'network' target. This script loads ixgbe, waits 2 seconds, loads igb. I now see all network devices registered. This is quite a bit of a hac

[E1000-devel] Supply excellent CATV Optical Transmitter, EDFA, Optical Node - Factory - Competitive Price

2016-12-07 Thread Sherry
Dear Mr. Purchasing Manager, Good morning! This is Sherry form WSEE, a leading manufacturer of CATV equipments and telecommunication products for more than 10 years. We are professional in this field, establishing good relationships with many countries like USA, Russia, India, Vitetnam, Spain,