On Sun, Oct 23, 2005 at 01:10:37PM +0200, Andrew Lunn wrote:
On Sun, Oct 23, 2005 at 10:10:45AM +, Ali Sina wrote:
Andrew, thanks again- both problems solved, following your advice below:
- took the redoobot repository code and worked from there
- disabled the init of UART0 in
this?
Cheers,
Ali
From: Andrew Lunn [EMAIL PROTECTED]
To: Ali Sina [EMAIL PROTECTED]
CC: ecos-discuss@ecos.sourceware.org
Subject: Re: [ECOS] Porting eCos / Redboot / Memory map modifications / E7T
Date: Sun, 16 Oct 2005 23:17:51 +0200
On Sun, Oct 16, 2005 at 08:46:53PM +, Ali Sina wrote:
Thanks
On Sun, Oct 23, 2005 at 10:10:45AM +, Ali Sina wrote:
Andrew, thanks again- both problems solved, following your advice below:
- took the redoobot repository code and worked from there
- disabled the init of UART0 in hal_diag.c
Now one small thing is left regarding the redboot start
]
CC: ecos-discuss@ecos.sourceware.org
Subject: Re: [ECOS] Porting eCos / Redboot / Memory map modifications / E7T
Date: Wed, 28 Sep 2005 10:58:27 +0200
On Wed, Sep 28, 2005 at 08:15:10AM +, Ali Sina wrote:
Hello,
we are trying to get our code to run on our own hardware, which for all
On Sun, Oct 16, 2005 at 08:46:53PM +, Ali Sina wrote:
Thanks Andrew,
we finally got the memory recognized by properly modifying the 3 files.
Indeed, modification of hal_platform_setup.h was necessary.
Now the next two questions arise:
1. I would like to make Redboot the only
