According to eMMC spec, OCR.PowerUp bit is also busy bit. If the busy
bit is '0', CMD1 should be sent and OCR should be fetched again. And add
a timeout counter on the repeated steps.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Haojian Zhuang <haojian.zhu...@linaro.org>
---
EmbeddedPkg/Universal/MmcDxe/MmcIdentification.c | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
diff --git a/EmbeddedPkg/Universal/MmcDxe/MmcIdentification.c
b/EmbeddedPkg/Universal/MmcDxe/MmcIdentification.c
index 2d8038f..0b0a044 100644
--- a/EmbeddedPkg/Universal/MmcDxe/MmcIdentification.c
+++ b/EmbeddedPkg/Universal/MmcDxe/MmcIdentification.c
@@ -222,14 +222,19 @@ MmcIdentificationMode (
// Send CMD1 to get OCR (MMC)
// This command only valid for MMC and eMMC
- Status = MmcHost->SendCommand (MmcHost, MMC_CMD1,
EMMC_CMD1_CAPACITY_GREATER_THAN_2GB);
- if (Status == EFI_SUCCESS) {
+ Timeout = MAX_RETRY_COUNT;
+ do {
+ Status = MmcHost->SendCommand (MmcHost, MMC_CMD1,
EMMC_CMD1_CAPACITY_GREATER_THAN_2GB);
+ if (EFI_ERROR (Status))
+ break;
Status = MmcHost->ReceiveResponse (MmcHost, MMC_RESPONSE_TYPE_OCR, (UINT32
*)&OcrResponse);
if (EFI_ERROR (Status)) {
DEBUG ((EFI_D_ERROR, "MmcIdentificationMode() : Failed to receive OCR,
Status=%r.\n", Status));
return Status;
}
-
+ Timeout--;
+ } while (!OcrResponse.Ocr.PowerUp && (Timeout > 0));
+ if (Status == EFI_SUCCESS) {
if (!OcrResponse.Ocr.PowerUp) {
DEBUG ((EFI_D_ERROR, "MmcIdentificationMode(MMC_CMD1): Card
initialisation failure, Status=%r.\n", Status));
return EFI_DEVICE_ERROR;
--
2.7.4
_______________________________________________
edk2-devel mailing list
edk2-devel@lists.01.org
https://lists.01.org/mailman/listinfo/edk2-devel
