Re: [edk2] [PATCH v2] ShellPkg/TftpDynamicCommand: Change file writing method in tftp
Hi Laszlo,
Thank you for the comments.
For your questions below:
> Before the patch, the shell would write the entire file in "one go".
>
> In this particular case, I'm not interested in the memory allocation
> size, but the transfer block size that the shell would ultimately use
> with EFI_FILE_WRITE. I find it interesting because some lower-level
> storage drivers may have limitations themselves (for example, a single
> SCSI transfer might not be larger than 1GB). What layer would handle
> (split) a downloaded file larger than that into smaller chunks? Maybe
> the FS (FAT) driver?
Although underlying driver can handle split writing, we still need split
writing in application layer because:
1. To improve user experiences -- if write the entire file in "one go" way, the
shell looks like hanged after download finished.
After this patch, shell prompt will show up immediately after the
downloading progress bar finished.
2. Before this patch, if the file size is larger than physical memory size, we
cannot download the file.
> And, after the patch, we're now writing TFTP packet-sized chunks to the
> file. Is this not a performance problem for traditional spindle disks
> ("spinning rust")? If neither the rest of the driver stack, nor the disk
> controller itself, support some form of write caching, then writing out
> every TFTP packet in isolation (especially for a multi-GB file) could be
> detrimental to performance (and maybe to the health of the spindle disk).
>
> Currently I'm not affected by this use case either way, so feel free to
> ignore, but it might make sense to implement some larger chunking here,
> like 64KB or 128KB -- later, as a separate Feature BZ.
We agree with this comment. It is a performance problem and will be fixed.
Best,
Songpeng
> -Original Message-
> From: Laszlo Ersek [mailto:ler...@redhat.com]
> Sent: Friday, January 11, 2019 6:25 PM
> To: Li, Songpeng ; edk2-devel@lists.01.org
> Cc: Carsey, Jaben ; Ni, Ray ;
> Wu, Jiaxin
> Subject: Re: [edk2] [PATCH v2] ShellPkg/TftpDynamicCommand: Change file
> writing method in tftp
>
> On 01/10/19 03:54, Songpeng Li wrote:
> > REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1433
> >
> > v2: Remove an unused variable.
> >
> > Current logic of shell tftp download was writing file after tftp
> > download finished, when the file is large, it looks like the shell
> > tftp command hanged after download was finished. To improve
> > end-user experience, the solution is using split file writing
> > instead.
> >
> > This patch update the code to open and close file inside
> > DownloadFile(), and save each packet to file within callback
> > function CheckPacket().
>
> I have some questions, just out of curiosity:
>
> >
> > Since AllocatePage() is no-longer needed, This patch can also
> > remove the memory limitation. The download file can be larger
> > than system free memory now.
> >
> > Cc: Jaben Carsey
> > Cc: Ruiyu Ni
> > Cc: Wu Jiaxin
> > Contributed-under: TianoCore Contribution Agreement 1.1
> > Signed-off-by: Songpeng Li
> > ---
> > ShellPkg/DynamicCommand/TftpDynamicCommand/Tftp.c | 154
>
> > 1 file changed, 64 insertions(+), 90 deletions(-)
> >
> > diff --git a/ShellPkg/DynamicCommand/TftpDynamicCommand/Tftp.c
> b/ShellPkg/DynamicCommand/TftpDynamicCommand/Tftp.c
> > index ed081b5bad7c..ba753a279b00 100644
> > --- a/ShellPkg/DynamicCommand/TftpDynamicCommand/Tftp.c
> > +++ b/ShellPkg/DynamicCommand/TftpDynamicCommand/Tftp.c
> > @@ -41,6 +41,12 @@ STATIC CONST CHAR16 mTftpProgressFrame[] = L"[
> > // (TFTP_PROGRESS_MESSAGE_SIZE-1) '\b'
> > STATIC CONST CHAR16 mTftpProgressDelete[] =
> L"\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\
> b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b";
> >
> > +// Local File Handle
> > +SHELL_FILE_HANDLE mFileHandle;
> > +
> > +// Path of the local file, Unicode encoded
> > +CONST CHAR16 *mLocalFilePath;
> > +
> > /**
> >Check and convert the UINT16 option values of the 'tftp' command
> >
> > @@ -166,9 +172,6 @@ GetFileSize (
> >@param[in] FileSize Size of the file in number of bytes
> >@param[in] BlockSize Value of the TFTP blksize option
> >@param[in] WindowSize Value of the TFTP window size option
> > - @param[out] Data Address where to store the address of the
> buffer
> > - where the data of the file were downloaded in
> > - case of success.
> >
> >
Re: [edk2] [PATCH v2] ShellPkg/TftpDynamicCommand: Change file writing method in tftp
On 01/10/19 03:54, Songpeng Li wrote:
> REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1433
>
> v2: Remove an unused variable.
>
> Current logic of shell tftp download was writing file after tftp
> download finished, when the file is large, it looks like the shell
> tftp command hanged after download was finished. To improve
> end-user experience, the solution is using split file writing
> instead.
>
> This patch update the code to open and close file inside
> DownloadFile(), and save each packet to file within callback
> function CheckPacket().
I have some questions, just out of curiosity:
>
> Since AllocatePage() is no-longer needed, This patch can also
> remove the memory limitation. The download file can be larger
> than system free memory now.
>
> Cc: Jaben Carsey
> Cc: Ruiyu Ni
> Cc: Wu Jiaxin
> Contributed-under: TianoCore Contribution Agreement 1.1
> Signed-off-by: Songpeng Li
> ---
> ShellPkg/DynamicCommand/TftpDynamicCommand/Tftp.c | 154
> 1 file changed, 64 insertions(+), 90 deletions(-)
>
> diff --git a/ShellPkg/DynamicCommand/TftpDynamicCommand/Tftp.c
> b/ShellPkg/DynamicCommand/TftpDynamicCommand/Tftp.c
> index ed081b5bad7c..ba753a279b00 100644
> --- a/ShellPkg/DynamicCommand/TftpDynamicCommand/Tftp.c
> +++ b/ShellPkg/DynamicCommand/TftpDynamicCommand/Tftp.c
> @@ -41,6 +41,12 @@ STATIC CONST CHAR16 mTftpProgressFrame[] = L"[
> // (TFTP_PROGRESS_MESSAGE_SIZE-1) '\b'
> STATIC CONST CHAR16 mTftpProgressDelete[] =
> L"\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b";
>
> +// Local File Handle
> +SHELL_FILE_HANDLE mFileHandle;
> +
> +// Path of the local file, Unicode encoded
> +CONST CHAR16 *mLocalFilePath;
> +
> /**
>Check and convert the UINT16 option values of the 'tftp' command
>
> @@ -166,9 +172,6 @@ GetFileSize (
>@param[in] FileSize Size of the file in number of bytes
>@param[in] BlockSize Value of the TFTP blksize option
>@param[in] WindowSize Value of the TFTP window size option
> - @param[out] Data Address where to store the address of the
> buffer
> - where the data of the file were downloaded in
> - case of success.
>
>@retval EFI_SUCCESS The file was downloaded.
>@retval EFI_OUT_OF_RESOURCES A memory allocation failed.
> @@ -184,8 +187,7 @@ DownloadFile (
>IN CONST CHAR8 *AsciiFilePath,
>IN UINTNFileSize,
>IN UINT16 BlockSize,
> - IN UINT16 WindowSize,
> - OUT VOID **Data
> + IN UINT16 WindowSize
>);
>
> /**
> @@ -287,7 +289,6 @@ RunTftp (
>CHAR8 *AsciiRemoteFilePath;
>UINTN FilePathSize;
>CONST CHAR16*Walker;
> - CONST CHAR16*LocalFilePath;
>EFI_MTFTP4_CONFIG_DATA Mtftp4ConfigData;
>EFI_HANDLE *Handles;
>UINTN HandleCount;
> @@ -297,9 +298,6 @@ RunTftp (
>EFI_HANDLE Mtftp4ChildHandle;
>EFI_MTFTP4_PROTOCOL *Mtftp4;
>UINTN FileSize;
> - UINTN DataSize;
> - VOID*Data;
> - SHELL_FILE_HANDLE FileHandle;
>UINT16 BlockSize;
>UINT16 WindowSize;
>
> @@ -309,7 +307,6 @@ RunTftp (
>AsciiRemoteFilePath = NULL;
>Handles = NULL;
>FileSize= 0;
> - DataSize= 0;
>BlockSize = MTFTP_DEFAULT_BLKSIZE;
>WindowSize = MTFTP_DEFAULT_WINDOWSIZE;
>
> @@ -385,7 +382,7 @@ RunTftp (
>UnicodeStrToAsciiStrS (RemoteFilePath, AsciiRemoteFilePath, FilePathSize);
>
>if (ParamCount == 4) {
> -LocalFilePath = ShellCommandLineGetRawValue (CheckPackage, 3);
> +mLocalFilePath = ShellCommandLineGetRawValue (CheckPackage, 3);
>} else {
> Walker = RemoteFilePath + StrLen (RemoteFilePath);
> while ((--Walker) >= RemoteFilePath) {
> @@ -394,7 +391,7 @@ RunTftp (
> break;
>}
> }
> -LocalFilePath = Walker + 1;
> +mLocalFilePath = Walker + 1;
>}
>
>//
> @@ -492,7 +489,6 @@ RunTftp (
> (NicNumber < HandleCount) && (ShellStatus != SHELL_SUCCESS);
> NicNumber++) {
> ControllerHandle = Handles[NicNumber];
> -Data = NULL;
>
> Status = GetNicName (ControllerHandle, NicNumber, NicName);
> if (EFI_ERROR (Status)) {
> @@ -543,7 +539,7 @@ RunTftp (
>goto NextHandle;
> }
>
> -Status = DownloadFile (Mtftp4, RemoteFilePath, AsciiRemoteFilePath,
> FileSize, BlockSize, WindowSize, );
> +Status = DownloadFile (Mtftp4, RemoteFilePath, AsciiRemoteFilePath,
> FileSize, BlockSize, WindowSize);
> if (EFI_ERROR (Status)) {
>ShellPrintHiiEx (
> -1, -1, NULL, STRING_TOKEN (STR_TFTP_ERR_DOWNLOAD),
> @@ -552,45
Re: [edk2] [PATCH v2] ShellPkg/TftpDynamicCommand: Change file writing method in tftp
Reviewed-by: Wu Jiaxin
> -Original Message-
> From: Li, Songpeng
> Sent: Thursday, January 10, 2019 10:54 AM
> To: edk2-devel@lists.01.org
> Cc: Carsey, Jaben ; Ni, Ray ;
> Wu, Jiaxin
> Subject: [PATCH v2] ShellPkg/TftpDynamicCommand: Change file writing
> method in tftp
>
> REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1433
>
> v2: Remove an unused variable.
>
> Current logic of shell tftp download was writing file after tftp
> download finished, when the file is large, it looks like the shell
> tftp command hanged after download was finished. To improve
> end-user experience, the solution is using split file writing
> instead.
>
> This patch update the code to open and close file inside
> DownloadFile(), and save each packet to file within callback
> function CheckPacket().
>
> Since AllocatePage() is no-longer needed, This patch can also
> remove the memory limitation. The download file can be larger
> than system free memory now.
>
> Cc: Jaben Carsey
> Cc: Ruiyu Ni
> Cc: Wu Jiaxin
> Contributed-under: TianoCore Contribution Agreement 1.1
> Signed-off-by: Songpeng Li
> ---
> ShellPkg/DynamicCommand/TftpDynamicCommand/Tftp.c | 154 -
> ---
> 1 file changed, 64 insertions(+), 90 deletions(-)
>
> diff --git a/ShellPkg/DynamicCommand/TftpDynamicCommand/Tftp.c
> b/ShellPkg/DynamicCommand/TftpDynamicCommand/Tftp.c
> index ed081b5bad7c..ba753a279b00 100644
> --- a/ShellPkg/DynamicCommand/TftpDynamicCommand/Tftp.c
> +++ b/ShellPkg/DynamicCommand/TftpDynamicCommand/Tftp.c
> @@ -41,6 +41,12 @@ STATIC CONST CHAR16 mTftpProgressFrame[] = L"[
> // (TFTP_PROGRESS_MESSAGE_SIZE-1) '\b'
> STATIC CONST CHAR16 mTftpProgressDelete[] =
> L"\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b
> \b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b";
>
> +// Local File Handle
> +SHELL_FILE_HANDLE mFileHandle;
> +
> +// Path of the local file, Unicode encoded
> +CONST CHAR16 *mLocalFilePath;
> +
> /**
>Check and convert the UINT16 option values of the 'tftp' command
>
> @@ -166,9 +172,6 @@ GetFileSize (
>@param[in] FileSize Size of the file in number of bytes
>@param[in] BlockSize Value of the TFTP blksize option
>@param[in] WindowSize Value of the TFTP window size option
> - @param[out] Data Address where to store the address of the
> buffer
> - where the data of the file were downloaded in
> - case of success.
>
>@retval EFI_SUCCESS The file was downloaded.
>@retval EFI_OUT_OF_RESOURCES A memory allocation failed.
> @@ -184,8 +187,7 @@ DownloadFile (
>IN CONST CHAR8 *AsciiFilePath,
>IN UINTNFileSize,
>IN UINT16 BlockSize,
> - IN UINT16 WindowSize,
> - OUT VOID **Data
> + IN UINT16 WindowSize
>);
>
> /**
> @@ -287,7 +289,6 @@ RunTftp (
>CHAR8 *AsciiRemoteFilePath;
>UINTN FilePathSize;
>CONST CHAR16*Walker;
> - CONST CHAR16*LocalFilePath;
>EFI_MTFTP4_CONFIG_DATA Mtftp4ConfigData;
>EFI_HANDLE *Handles;
>UINTN HandleCount;
> @@ -297,9 +298,6 @@ RunTftp (
>EFI_HANDLE Mtftp4ChildHandle;
>EFI_MTFTP4_PROTOCOL *Mtftp4;
>UINTN FileSize;
> - UINTN DataSize;
> - VOID*Data;
> - SHELL_FILE_HANDLE FileHandle;
>UINT16 BlockSize;
>UINT16 WindowSize;
>
> @@ -309,7 +307,6 @@ RunTftp (
>AsciiRemoteFilePath = NULL;
>Handles = NULL;
>FileSize= 0;
> - DataSize= 0;
>BlockSize = MTFTP_DEFAULT_BLKSIZE;
>WindowSize = MTFTP_DEFAULT_WINDOWSIZE;
>
> @@ -385,7 +382,7 @@ RunTftp (
>UnicodeStrToAsciiStrS (RemoteFilePath, AsciiRemoteFilePath, FilePathSize);
>
>if (ParamCount == 4) {
> -LocalFilePath = ShellCommandLineGetRawValue (CheckPackage, 3);
> +mLocalFilePath = ShellCommandLineGetRawValue (CheckPackage, 3);
>} else {
> Walker = RemoteFilePath + StrLen (RemoteFilePath);
> while ((--Walker) >= RemoteFilePath) {
> @@ -394,7 +391,7 @@ RunTftp (
> break;
>}
> }
> -LocalFilePath = Walker + 1;
> +mLocalFilePath = Walker + 1;
>}
>
>//
> @@ -492,7 +489,6 @@ RunTftp (
> (NicNumber < HandleCount) && (ShellStatus != SHELL_SUCCESS);
> NicNumber++) {
> ControllerHandle = Handles[NicNumber];
> -Data = NULL;
>
> Status = GetNicName (ControllerHandle, NicNumber, NicName);
> if (EFI_ERROR (Status)) {
> @@ -543,7 +539,7 @@ RunTftp (
>goto NextHandle;
> }
>
> -Status = DownloadFile (Mtftp4, RemoteFilePath, AsciiRemoteFilePath,
> FileSize, BlockSize, WindowSize, );
> +Status = DownloadFile (Mtftp4, RemoteFilePath,
Re: [edk2] [PATCH v2] ShellPkg/TftpDynamicCommand: Change file writing method in tftp
Reviewed-by: Jaben Carsey
> -Original Message-
> From: Li, Songpeng
> Sent: Wednesday, January 09, 2019 6:54 PM
> To: edk2-devel@lists.01.org
> Cc: Carsey, Jaben ; Ni, Ray ;
> Wu, Jiaxin
> Subject: [PATCH v2] ShellPkg/TftpDynamicCommand: Change file writing
> method in tftp
> Importance: High
>
> REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1433
>
> v2: Remove an unused variable.
>
> Current logic of shell tftp download was writing file after tftp
> download finished, when the file is large, it looks like the shell
> tftp command hanged after download was finished. To improve
> end-user experience, the solution is using split file writing
> instead.
>
> This patch update the code to open and close file inside
> DownloadFile(), and save each packet to file within callback
> function CheckPacket().
>
> Since AllocatePage() is no-longer needed, This patch can also
> remove the memory limitation. The download file can be larger
> than system free memory now.
>
> Cc: Jaben Carsey
> Cc: Ruiyu Ni
> Cc: Wu Jiaxin
> Contributed-under: TianoCore Contribution Agreement 1.1
> Signed-off-by: Songpeng Li
> ---
> ShellPkg/DynamicCommand/TftpDynamicCommand/Tftp.c | 154 -
> ---
> 1 file changed, 64 insertions(+), 90 deletions(-)
>
> diff --git a/ShellPkg/DynamicCommand/TftpDynamicCommand/Tftp.c
> b/ShellPkg/DynamicCommand/TftpDynamicCommand/Tftp.c
> index ed081b5bad7c..ba753a279b00 100644
> --- a/ShellPkg/DynamicCommand/TftpDynamicCommand/Tftp.c
> +++ b/ShellPkg/DynamicCommand/TftpDynamicCommand/Tftp.c
> @@ -41,6 +41,12 @@ STATIC CONST CHAR16 mTftpProgressFrame[] = L"[
> // (TFTP_PROGRESS_MESSAGE_SIZE-1) '\b'
> STATIC CONST CHAR16 mTftpProgressDelete[] =
> L"\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\
> b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b";
>
> +// Local File Handle
> +SHELL_FILE_HANDLE mFileHandle;
> +
> +// Path of the local file, Unicode encoded
> +CONST CHAR16 *mLocalFilePath;
> +
> /**
>Check and convert the UINT16 option values of the 'tftp' command
>
> @@ -166,9 +172,6 @@ GetFileSize (
>@param[in] FileSize Size of the file in number of bytes
>@param[in] BlockSize Value of the TFTP blksize option
>@param[in] WindowSize Value of the TFTP window size option
> - @param[out] Data Address where to store the address of the
> buffer
> - where the data of the file were downloaded in
> - case of success.
>
>@retval EFI_SUCCESS The file was downloaded.
>@retval EFI_OUT_OF_RESOURCES A memory allocation failed.
> @@ -184,8 +187,7 @@ DownloadFile (
>IN CONST CHAR8 *AsciiFilePath,
>IN UINTNFileSize,
>IN UINT16 BlockSize,
> - IN UINT16 WindowSize,
> - OUT VOID **Data
> + IN UINT16 WindowSize
>);
>
> /**
> @@ -287,7 +289,6 @@ RunTftp (
>CHAR8 *AsciiRemoteFilePath;
>UINTN FilePathSize;
>CONST CHAR16*Walker;
> - CONST CHAR16*LocalFilePath;
>EFI_MTFTP4_CONFIG_DATA Mtftp4ConfigData;
>EFI_HANDLE *Handles;
>UINTN HandleCount;
> @@ -297,9 +298,6 @@ RunTftp (
>EFI_HANDLE Mtftp4ChildHandle;
>EFI_MTFTP4_PROTOCOL *Mtftp4;
>UINTN FileSize;
> - UINTN DataSize;
> - VOID*Data;
> - SHELL_FILE_HANDLE FileHandle;
>UINT16 BlockSize;
>UINT16 WindowSize;
>
> @@ -309,7 +307,6 @@ RunTftp (
>AsciiRemoteFilePath = NULL;
>Handles = NULL;
>FileSize= 0;
> - DataSize= 0;
>BlockSize = MTFTP_DEFAULT_BLKSIZE;
>WindowSize = MTFTP_DEFAULT_WINDOWSIZE;
>
> @@ -385,7 +382,7 @@ RunTftp (
>UnicodeStrToAsciiStrS (RemoteFilePath, AsciiRemoteFilePath, FilePathSize);
>
>if (ParamCount == 4) {
> -LocalFilePath = ShellCommandLineGetRawValue (CheckPackage, 3);
> +mLocalFilePath = ShellCommandLineGetRawValue (CheckPackage, 3);
>} else {
> Walker = RemoteFilePath + StrLen (RemoteFilePath);
> while ((--Walker) >= RemoteFilePath) {
> @@ -394,7 +391,7 @@ RunTftp (
> break;
>}
> }
> -LocalFilePath = Walker + 1;
> +mLocalFilePath = Walker + 1;
>}
>
>//
> @@ -492,7 +489,6 @@ RunTftp (
> (NicNumber < HandleCount) && (ShellStatus != SHELL_SUCCESS);
> NicNumber++) {
> ControllerHandle = Handles[NicNumber];
> -Data = NULL;
>
> Status = GetNicName (ControllerHandle, NicNumber, NicName);
> if (EFI_ERROR (Status)) {
> @@ -543,7 +539,7 @@ RunTftp (
>goto NextHandle;
> }
>
> -Status = DownloadFile (Mtftp4, RemoteFilePath, AsciiRemoteFilePath,
> FileSize, BlockSize, WindowSize, );
> +Status = DownloadFile (Mtftp4,
[edk2] [PATCH v2] ShellPkg/TftpDynamicCommand: Change file writing method in tftp
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1433
v2: Remove an unused variable.
Current logic of shell tftp download was writing file after tftp
download finished, when the file is large, it looks like the shell
tftp command hanged after download was finished. To improve
end-user experience, the solution is using split file writing
instead.
This patch update the code to open and close file inside
DownloadFile(), and save each packet to file within callback
function CheckPacket().
Since AllocatePage() is no-longer needed, This patch can also
remove the memory limitation. The download file can be larger
than system free memory now.
Cc: Jaben Carsey
Cc: Ruiyu Ni
Cc: Wu Jiaxin
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Songpeng Li
---
ShellPkg/DynamicCommand/TftpDynamicCommand/Tftp.c | 154
1 file changed, 64 insertions(+), 90 deletions(-)
diff --git a/ShellPkg/DynamicCommand/TftpDynamicCommand/Tftp.c
b/ShellPkg/DynamicCommand/TftpDynamicCommand/Tftp.c
index ed081b5bad7c..ba753a279b00 100644
--- a/ShellPkg/DynamicCommand/TftpDynamicCommand/Tftp.c
+++ b/ShellPkg/DynamicCommand/TftpDynamicCommand/Tftp.c
@@ -41,6 +41,12 @@ STATIC CONST CHAR16 mTftpProgressFrame[] = L"[
// (TFTP_PROGRESS_MESSAGE_SIZE-1) '\b'
STATIC CONST CHAR16 mTftpProgressDelete[] =
L"\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b";
+// Local File Handle
+SHELL_FILE_HANDLE mFileHandle;
+
+// Path of the local file, Unicode encoded
+CONST CHAR16 *mLocalFilePath;
+
/**
Check and convert the UINT16 option values of the 'tftp' command
@@ -166,9 +172,6 @@ GetFileSize (
@param[in] FileSize Size of the file in number of bytes
@param[in] BlockSize Value of the TFTP blksize option
@param[in] WindowSize Value of the TFTP window size option
- @param[out] Data Address where to store the address of the buffer
- where the data of the file were downloaded in
- case of success.
@retval EFI_SUCCESS The file was downloaded.
@retval EFI_OUT_OF_RESOURCES A memory allocation failed.
@@ -184,8 +187,7 @@ DownloadFile (
IN CONST CHAR8 *AsciiFilePath,
IN UINTNFileSize,
IN UINT16 BlockSize,
- IN UINT16 WindowSize,
- OUT VOID **Data
+ IN UINT16 WindowSize
);
/**
@@ -287,7 +289,6 @@ RunTftp (
CHAR8 *AsciiRemoteFilePath;
UINTN FilePathSize;
CONST CHAR16*Walker;
- CONST CHAR16*LocalFilePath;
EFI_MTFTP4_CONFIG_DATA Mtftp4ConfigData;
EFI_HANDLE *Handles;
UINTN HandleCount;
@@ -297,9 +298,6 @@ RunTftp (
EFI_HANDLE Mtftp4ChildHandle;
EFI_MTFTP4_PROTOCOL *Mtftp4;
UINTN FileSize;
- UINTN DataSize;
- VOID*Data;
- SHELL_FILE_HANDLE FileHandle;
UINT16 BlockSize;
UINT16 WindowSize;
@@ -309,7 +307,6 @@ RunTftp (
AsciiRemoteFilePath = NULL;
Handles = NULL;
FileSize= 0;
- DataSize= 0;
BlockSize = MTFTP_DEFAULT_BLKSIZE;
WindowSize = MTFTP_DEFAULT_WINDOWSIZE;
@@ -385,7 +382,7 @@ RunTftp (
UnicodeStrToAsciiStrS (RemoteFilePath, AsciiRemoteFilePath, FilePathSize);
if (ParamCount == 4) {
-LocalFilePath = ShellCommandLineGetRawValue (CheckPackage, 3);
+mLocalFilePath = ShellCommandLineGetRawValue (CheckPackage, 3);
} else {
Walker = RemoteFilePath + StrLen (RemoteFilePath);
while ((--Walker) >= RemoteFilePath) {
@@ -394,7 +391,7 @@ RunTftp (
break;
}
}
-LocalFilePath = Walker + 1;
+mLocalFilePath = Walker + 1;
}
//
@@ -492,7 +489,6 @@ RunTftp (
(NicNumber < HandleCount) && (ShellStatus != SHELL_SUCCESS);
NicNumber++) {
ControllerHandle = Handles[NicNumber];
-Data = NULL;
Status = GetNicName (ControllerHandle, NicNumber, NicName);
if (EFI_ERROR (Status)) {
@@ -543,7 +539,7 @@ RunTftp (
goto NextHandle;
}
-Status = DownloadFile (Mtftp4, RemoteFilePath, AsciiRemoteFilePath,
FileSize, BlockSize, WindowSize, );
+Status = DownloadFile (Mtftp4, RemoteFilePath, AsciiRemoteFilePath,
FileSize, BlockSize, WindowSize);
if (EFI_ERROR (Status)) {
ShellPrintHiiEx (
-1, -1, NULL, STRING_TOKEN (STR_TFTP_ERR_DOWNLOAD),
@@ -552,45 +548,8 @@ RunTftp (
goto NextHandle;
}
-DataSize = FileSize;
-
-if (!EFI_ERROR (ShellFileExists (LocalFilePath))) {
- ShellDeleteFileByName (LocalFilePath);
-}
-
-Status = ShellOpenFileByName (
- LocalFilePath,
- ,
- EFI_FILE_MODE_CREATE |
- EFI_FILE_MODE_WRITE
[edk2] [PATCH v2] ShellPkg/TftpDynamicCommand: Change file writing method in tftp
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1433
v2: Remove an unused variable.
Current logic of shell tftp download was writing file after tftp
download finished, when the file is large, it looks like the shell
tftp command hanged after download was finished. To improve
end-user experience, the solution is using split file writing
instead.
This patch update the code to open and close file inside
DownloadFile(), and save each packet to file within callback
function CheckPacket().
Since AllocatePage() is no-longer needed, This patch can also
remove the memory limitation. The download file can be larger
than system free memory now.
Cc: Jaben Carsey
Cc: Ruiyu Ni
Cc: Wu Jiaxin
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Songpeng Li
---
ShellPkg/DynamicCommand/TftpDynamicCommand/Tftp.c | 154
1 file changed, 64 insertions(+), 90 deletions(-)
diff --git a/ShellPkg/DynamicCommand/TftpDynamicCommand/Tftp.c
b/ShellPkg/DynamicCommand/TftpDynamicCommand/Tftp.c
index ed081b5bad7c..ba753a279b00 100644
--- a/ShellPkg/DynamicCommand/TftpDynamicCommand/Tftp.c
+++ b/ShellPkg/DynamicCommand/TftpDynamicCommand/Tftp.c
@@ -41,6 +41,12 @@ STATIC CONST CHAR16 mTftpProgressFrame[] = L"[
// (TFTP_PROGRESS_MESSAGE_SIZE-1) '\b'
STATIC CONST CHAR16 mTftpProgressDelete[] =
L"\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b";
+// Local File Handle
+SHELL_FILE_HANDLE mFileHandle;
+
+// Path of the local file, Unicode encoded
+CONST CHAR16 *mLocalFilePath;
+
/**
Check and convert the UINT16 option values of the 'tftp' command
@@ -166,9 +172,6 @@ GetFileSize (
@param[in] FileSize Size of the file in number of bytes
@param[in] BlockSize Value of the TFTP blksize option
@param[in] WindowSize Value of the TFTP window size option
- @param[out] Data Address where to store the address of the buffer
- where the data of the file were downloaded in
- case of success.
@retval EFI_SUCCESS The file was downloaded.
@retval EFI_OUT_OF_RESOURCES A memory allocation failed.
@@ -184,8 +187,7 @@ DownloadFile (
IN CONST CHAR8 *AsciiFilePath,
IN UINTNFileSize,
IN UINT16 BlockSize,
- IN UINT16 WindowSize,
- OUT VOID **Data
+ IN UINT16 WindowSize
);
/**
@@ -287,7 +289,6 @@ RunTftp (
CHAR8 *AsciiRemoteFilePath;
UINTN FilePathSize;
CONST CHAR16*Walker;
- CONST CHAR16*LocalFilePath;
EFI_MTFTP4_CONFIG_DATA Mtftp4ConfigData;
EFI_HANDLE *Handles;
UINTN HandleCount;
@@ -297,9 +298,6 @@ RunTftp (
EFI_HANDLE Mtftp4ChildHandle;
EFI_MTFTP4_PROTOCOL *Mtftp4;
UINTN FileSize;
- UINTN DataSize;
- VOID*Data;
- SHELL_FILE_HANDLE FileHandle;
UINT16 BlockSize;
UINT16 WindowSize;
@@ -309,7 +307,6 @@ RunTftp (
AsciiRemoteFilePath = NULL;
Handles = NULL;
FileSize= 0;
- DataSize= 0;
BlockSize = MTFTP_DEFAULT_BLKSIZE;
WindowSize = MTFTP_DEFAULT_WINDOWSIZE;
@@ -385,7 +382,7 @@ RunTftp (
UnicodeStrToAsciiStrS (RemoteFilePath, AsciiRemoteFilePath, FilePathSize);
if (ParamCount == 4) {
-LocalFilePath = ShellCommandLineGetRawValue (CheckPackage, 3);
+mLocalFilePath = ShellCommandLineGetRawValue (CheckPackage, 3);
} else {
Walker = RemoteFilePath + StrLen (RemoteFilePath);
while ((--Walker) >= RemoteFilePath) {
@@ -394,7 +391,7 @@ RunTftp (
break;
}
}
-LocalFilePath = Walker + 1;
+mLocalFilePath = Walker + 1;
}
//
@@ -492,7 +489,6 @@ RunTftp (
(NicNumber < HandleCount) && (ShellStatus != SHELL_SUCCESS);
NicNumber++) {
ControllerHandle = Handles[NicNumber];
-Data = NULL;
Status = GetNicName (ControllerHandle, NicNumber, NicName);
if (EFI_ERROR (Status)) {
@@ -543,7 +539,7 @@ RunTftp (
goto NextHandle;
}
-Status = DownloadFile (Mtftp4, RemoteFilePath, AsciiRemoteFilePath,
FileSize, BlockSize, WindowSize, );
+Status = DownloadFile (Mtftp4, RemoteFilePath, AsciiRemoteFilePath,
FileSize, BlockSize, WindowSize);
if (EFI_ERROR (Status)) {
ShellPrintHiiEx (
-1, -1, NULL, STRING_TOKEN (STR_TFTP_ERR_DOWNLOAD),
@@ -552,45 +548,8 @@ RunTftp (
goto NextHandle;
}
-DataSize = FileSize;
-
-if (!EFI_ERROR (ShellFileExists (LocalFilePath))) {
- ShellDeleteFileByName (LocalFilePath);
-}
-
-Status = ShellOpenFileByName (
- LocalFilePath,
- ,
- EFI_FILE_MODE_CREATE |
- EFI_FILE_MODE_WRITE
