t; On 10/16/12 16:58, Jeff VanDellen wrote:
>
>> I've attached the the output of the serial console while attempting to
>> boot off the iso. Hopefully this information would be helpful.
>
> From the end of the attachment:
>
> Loading driver at 0x00010
I've tried following the steps in that link several times over the
past month or two. I've had no luck getting windows to boot under DUET
on kvm. I was able to get the usb install stick to boot but the
install would fail very early in the process.
On Thu, Oct 18, 2012 at 11:47 AM, Paolo Bonzini
Greetings,
On Sat, Oct 20, 2012 at 3:19 PM, Laszlo Ersek wrote:
> On 10/16/12 16:58, Jeff VanDellen wrote:
>
>> -Additionally, I have installed windows 2008 via vmware workstation 9
>> to an LVM slice.
>
> Was that with OVMF?
No, this was using vmware's implement
can safely boot with graphics mode
enabled and eliminate transitions to text mode.
Whenever the firmware boot manager hands off execution to a Windows
EFI application, platform firmware and the firmware boot manager must
not use the frame buffer for any purpose."
On Mon, Oct 22, 2012 at 12:1
On Mon, Oct 22, 2012 at 1:15 PM, Laszlo Ersek wrote:
> (The following passages are from [1], which I've referenced in section
> III of [2].)
>
>>
>> "Display at Boot Time
>> For a platform that has a console device, the UEFI 2.0 specification
>> requires the firmware to implement the Simple Text
Greetings ovmf devs,
Recently I've noticed that hotplug does not appear to work in Windows Server
2012 using virtio drivers with edk2.git-ovmf-x64 release:
20130829.b267.g6ce5535 from the following repo
http://www.kraxel.org/repos/jenkins/edk2/
Usually there is a safely remove hardware icon i
Greetings ovmf devs,
Recently I've noticed that hotplug does not appear to work in Windows Server
2012 using virtio drivers with edk2.git-ovmf-x64 release:
20130829.b267.g6ce5535 from the following repo
http://www.kraxel.org/repos/jenkins/edk2/
Usually there is a safely remove hardware icon i
