Reviewed-by: Star Zeng <star.z...@intel.com> -----Original Message----- From: Tian, Feng Sent: Wednesday, November 30, 2016 1:16 PM To: edk2-devel@lists.01.org Cc: Zeng, Star <star.z...@intel.com>; Mike Turner <michael.tur...@microsoft.com> Subject: [patch] MdeModulePkg/Ehci: don't clear port status bits during init
Port status bits are clear in original code, so no enumeration takes place. Changing this to prevent the status bits from being cleared allows enumeration to proceed normally. Cc: Star Zeng <star.z...@intel.com> Cc: Mike Turner <michael.tur...@microsoft.com> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Mike Turner <michael.tur...@microsoft.com> Signed-off-by: Feng Tian <feng.t...@intel.com> --- MdeModulePkg/Bus/Pci/EhciDxe/EhciReg.c | 10 +++++++++- MdeModulePkg/Bus/Pci/EhciPei/EhcPeim.c | 18 +++++++++++++----- 2 files changed, 22 insertions(+), 6 deletions(-) diff --git a/MdeModulePkg/Bus/Pci/EhciDxe/EhciReg.c b/MdeModulePkg/Bus/Pci/EhciDxe/EhciReg.c index 88a66ae..3a6ed02 100644 --- a/MdeModulePkg/Bus/Pci/EhciDxe/EhciReg.c +++ b/MdeModulePkg/Bus/Pci/EhciDxe/EhciReg.c @@ -591,6 +591,7 @@ EhcInitHC ( { EFI_STATUS Status; UINT32 Index; + UINT32 RegVal; // This ASSERT crashes the BeagleBoard. There is some issue in the USB stack. // This ASSERT needs to be removed so the BeagleBoard will boot. When we fix @@ -626,7 +627,14 @@ EhcInitHC ( // if (Ehc->HcStructParams & HCSP_PPC) { for (Index = 0; Index < (UINT8) (Ehc->HcStructParams & HCSP_NPORTS); Index++) { - EhcSetOpRegBit (Ehc, (UINT32) (EHC_PORT_STAT_OFFSET + (4 * Index)), PORTSC_POWER); + // + // Do not clear port status bits on initialization. Otherwise devices will + // not enumerate properly at startup. + // + RegVal = EhcReadOpReg(Ehc, (UINT32)(EHC_PORT_STAT_OFFSET + (4 * Index))); + RegVal &= ~PORTSC_CHANGE_MASK; + RegVal |= PORTSC_POWER; + EhcWriteOpReg (Ehc, (UINT32) (EHC_PORT_STAT_OFFSET + (4 * + Index)), RegVal); } } diff --git a/MdeModulePkg/Bus/Pci/EhciPei/EhcPeim.c b/MdeModulePkg/Bus/Pci/EhciPei/EhcPeim.c index 09769ea..31647ff 100644 --- a/MdeModulePkg/Bus/Pci/EhciPei/EhcPeim.c +++ b/MdeModulePkg/Bus/Pci/EhciPei/EhcPeim.c @@ -2,7 +2,7 @@ PEIM to produce gPeiUsb2HostControllerPpiGuid based on gPeiUsbControllerPpiGuid which is used to enable recovery function from USB Drivers. -Copyright (c) 2010 - 2013, Intel Corporation. All rights reserved.<BR> +Copyright (c) 2010 - 2016, Intel Corporation. All rights reserved.<BR> This program and the accompanying materials are licensed and made available under the terms and conditions @@ -411,12 +411,20 @@ EhcPowerOnAllPorts ( IN PEI_USB2_HC_DEV *Ehc ) { - UINT8 PortNumber; - UINT8 Index; - + UINT8 PortNumber; + UINT8 Index; + UINT32 RegVal; + PortNumber = (UINT8)(Ehc->HcStructParams & HCSP_NPORTS); for (Index = 0; Index < PortNumber; Index++) { - EhcSetOpRegBit (Ehc, EHC_PORT_STAT_OFFSET + 4 * Index, PORTSC_POWER); + // + // Do not clear port status bits on initialization. Otherwise devices will + // not enumerate properly at startup. + // + RegVal = EhcReadOpReg(Ehc, EHC_PORT_STAT_OFFSET + 4 * Index); + RegVal &= ~PORTSC_CHANGE_MASK; + RegVal |= PORTSC_POWER; + EhcWriteOpReg (Ehc, EHC_PORT_STAT_OFFSET + 4 * Index, RegVal); } } -- 2.7.1.windows.2 _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel