I have tried and i cannot connect. I am going to verify I have added port 22
for external access as comp-doc suggested. I thought I had made this change
but we shall see.
Toby.
On Dec 4, 2007 11:08 AM, Kenton and Saundi Brown [EMAIL PROTECTED]
wrote:
I do now if using an external dhcp will
Update: I added port 22 for external access and I cannot access public IP
via SSH from outside of network. However, if I ssh into a server on LAN (
192.168.1.0) going through Linksys router WAN (210.x.x.x) I can then SSH
210.x.x.x into efw box. The efw box has its own public IP as does the
Linksys
If you cant connect to openvpn or ssh, your ports are being
blocked.
Could be several reasons:
Public ip setup is wrong (such as the wrong subnet mask,
etc), or someone else is using the ip address you’re trying
to use.
The dsl modem isn’t in bridged mode and is using nat
instead.
A cable is
on 12/5/2007 3:12 PM toby spake the following:
No ports are blocked as this is a commercial T1 account. I have modem
connected to gigabit switch and devices needing public IPs are connected
to it and said devices are setup with static IPs from range given by
ISP. I will check to make sure I
No ports are blocked as this is a commercial T1 account. I have modem
connected to gigabit switch and devices needing public IPs are connected to
it and said devices are setup with static IPs from range given by ISP. I
will check to make sure I haven't given another device the IP address and
just
Are you sure you’ve got the red and green nics connected
correctly?
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
toby
Sent: Wednesday, December 05, 2007 4:12 PM
To: efw-user@lists.sourceforge.net
Subject: Re: [Efw-user] New efw 2.1.2 installation unable to
OpenVPN
No ports
NICs are connected correctly. I figured out why i was unable to connect to
EFW via public IP. I fat-fingered the gateway :). So now I can connect using
OpenVPN. I also enabled DHCP and put it on a 10.10.7.0 network for testing
purposes. So now I get a 10.10.7.x address when connecting via VPN.
