-Mensaje original-
De: /o=sensa/ou=Primer grupo administrativo/cn=Recipients/cn=erobles
Enviado el: Viernes, 08 de Agosto de 2008 16:38
Para: 'efw-user@lists.sourceforge.net'
Asunto: RE: [Efw-user] I c an't configure nics on EFW 2.1.2
Hi! Here is the output of ethtool with all the
on 8-8-2008 8:32 AM Edmundo Robles L. spake the following:
Hi! Here is the output of ethtool with all the nics and the ifconfig
output, also i tried to switch the ethernet cable but i got the same
result, i can't reach the page :-(
Was a cable attached to any port when you ran that?
Yes, it was attached, for that i am
-Mensaje original-
De: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] En nombre de Scott Silva
Enviado el: Viernes, 08 de Agosto de 2008 11:11
Para: efw-user@lists.sourceforge.net
Asunto: Re: [Efw-user] I c an't configure nics on EFW 2.1.2
on 8-8-2008
Hi,
your ethtool say no link at eth0 and eth1,
Maybe you have only one cable connected? And it was on eth2 where is no data
avaible from?
You can see in your ifconfig output, that br0 is attached to eth0 (compare
HWAddress)
Or if you don't wan't to compare by hand just type brctl show in console
on 8-8-2008 9:40 AM Edmundo Robles L. spake the following:
Yes, it was attached, for that i am
-Mensaje original-
Attached to switch, or to another PC. And if to another PC did you use a
crossover cable?
--
MailScanner is like deodorant...
You hope everybody uses it, and
you
Hi! After read and do it all your suggests, i dettached all the nics
and attached one of them then i was able to reach de setup web page,
this indicate to me the problem was by a bad ethernet nic,
Whatever i want to thank your help, your suggests were very useful to
leran a little more about
using either a Via VT6120 rev42 or a realtek rtl8139 rev10, ping times
(obtained from EFW console) spike from roughly 25ms to google to around
300-500ms for extended periods of time, even with all incoming and outgoing
traffic from green disabled.
DNS proxy is not transparent, the only running