Damien Sandras wrote:
Hi,
I have run Ekiga trunk today. I had not done so for a long time due to
bugfixing in the stable branch.
The same for me, I wait the new stable release to build the unstable
again...
I noticed the following bugs :
- latency to the echo test is high, it reaches
yannick wrote:
Julien Puydt a écrit :
Damien Sandras a écrit :
Hi,
- CPU usage is high : 30% without video (audio only)
No clue.
Seems there is an issue here too using stable branch:
on intel atom (1.6 MHz), CPU run at 50%, i.e. 800 Hz and top says for
calling 500: ~65% audio + video
Julien Puydt wrote:
Damien Sandras a écrit :
a list of problems
You forgot on shutdown :
assert.cxx(108)PWLibAssertion fail: Function
pthread_mutex_lock failed, file ptlib/unix/tlibthrd.cxx, line 1432,
Error=107
Assertion fail: Function pthread_mutex_lock failed, file
Damien Sandras wrote:
Le dimanche 20 septembre 2009 à 18:08 +0200, Eugen Dedu a écrit :
Julien Puydt wrote:
Damien Sandras a écrit :
a list of problems
You forgot on shutdown :
assert.cxx(108)PWLibAssertion fail: Function
pthread_mutex_lock failed, file ptlib/unix
Damien Sandras wrote:
Le dimanche 20 septembre 2009 à 18:30 +0200, Eugen Dedu a écrit :
Damien Sandras wrote:
Le dimanche 20 septembre 2009 à 18:08 +0200, Eugen Dedu a écrit :
Julien Puydt wrote:
Damien Sandras a écrit :
a list of problems
You forgot on shutdown :
assert.cxx(108
Michael Rickmann wrote:
Yesterday Robert checked commit 23341 into Opal stable which allows
Ekiga to deal with registrars which do not allow RFC1918-IPs and which
may possibly help in complex interface situations as reported in
http://bugzilla.gnome.org/show_bug.cgi?id=592012 . To use Opal's
Hi,
Me and Yannick have recently done exhaustive tests and discovered some
important bugs, see
http://wiki.ekiga.org/index.php/Pre-release_test#Ekiga_3.2.6_Pre-tests.
For ex. the Transfer does not work reliably. Another annoying bug
(that have not appeared before) is that I personally have very
Julien Puydt wrote:
Hi,
now that the ptlib+opal+ekiga trio can be compiled again, I wanted to
check for leaks ; I could barely get something since I kept hitting a
failed assertion in ptlib :
assert.cxx(108)PWLibAssertion fail: Function
pthread_mutex_lock failed, file
Jarmo Pussinen wrote:
Hi Michael and all
I continued testing ekiga-setup-3.2.pre6-release.exe
a bit and noticed that, when I called a SIP-call
to an automatic service that is controlled with DTMF
tones (with keypad) they did not work.
I checked with older version and it was as I
yannick wrote:
Eugen Dedu a écrit :
yannick wrote:
Michael Rickmann a écrit :
Yesterday Robert checked commit 23341 into Opal stable which allows
Ekiga to deal with registrars which do not allow RFC1918-IPs and which
may possibly help in complex interface situations as reported in
http
Thành Công Đỗ wrote:
My project is Embedded ekiga on Phone.
And i must sreach information about Ekiga H264.
There're website i traved:
http://wiki.ekiga.org/index.php/FAQ
http://wiki.ekiga.org/index.php/Main_Page
But they're not useful for me. I don't know what's about Ekiga H264. What's
Owen Barton wrote:
Hi All,
I have been experiencing recurrent segfaults and freeze-ups (kill -9ers)
using Ekiga on Ubuntu Fiesty (9.04). I used it extensively with Intrepid
(8.10) without any issues. The only think that may be slightly unusual about
my setup is (a) I use Pulseaudio with
Dave Allan wrote:
I hesitate a little to speak here, as I'm not completely versed in the
issues or the code, but here's a short statement of my experience with
these two problems on Fedora 10 using the SVN head as of about a week
ago. The head from this morning crashes when I try to make
Damien Sandras wrote:
Dear all,
It appears clearly that since a few months I can dedicate less time than
before to Ekiga. During the first 5 to 6 years of the project, I was
dedicating all evenings to the project and nearly all week-ends, fully.
It is now impossible for me to continue
Michael Rickmann wrote:
As far as I can see Win32 Ekiga's audio device / file handling need some
changes:
1) After the GetVolume issue has been fixed in Ptlib (
http://sourceforge.net/tracker/?func=detailaid=2841719group_id=204472atid=989748
) Win32 Ekiga can store the volume settings of its
Julien Puydt wrote:
Hi,
I'm crashing ekiga in various ways, and would like to know if I'm the
only one :
1) just launch and quit, and hit an assertion in ptlib (that one looks
awfully like something I had some time ago) ;
2) launch, call for example 5...@ekiga.net, stop the call, wait a
Julien Puydt wrote:
Thierry Simonnet a écrit :
here is the log of yesterday and today's cross compile log for win32.
Is it possible to have information to resolve this trouble?
Yes! Now ekiga uses boost' smart pointers!
Julien, what has changed in ekiga dependencies on master? For ex.,
André Abrantes wrote:
On Fri, Aug 21, 2009 at 20:49, thomas
schorppthomas.scho...@googlemail.com wrote:
André Abrantes wrote:
Hello there.
I have been working with Ekiga for quite some time and now I am
testing how it handles video calls coming from different environments
via Asterisk. But
Michael Rickmann wrote:
Eugen Dedu schrieb:
Michael Rickmann wrote:
Michael Rickmann schrieb:
m...@kabelfunk.de schrieb:
Hi,
I've installed Ekiga 3.2.5 on Windows XP and as far as I see it works
fine, but... :-)
I used the call back service 5...@ekiga.net for my test.
When the incoming
Michael Rickmann wrote:
Dominik schrieb:
Hi Michael,
please note for the second problem: It happens under linux, too. (not
as often, but it does)
So it's not a Windows specific problem.
Dominik
Dominik schrieb:
...
2. I have run/made many of echo tests and found strange things out:
When
Michael Rickmann wrote:
Michael Rickmann schrieb:
m...@kabelfunk.de schrieb:
Hi,
I've installed Ekiga 3.2.5 on Windows XP and as far as I see it works
fine, but... :-)
I used the call back service 5...@ekiga.net for my test.
When the incoming coming window pops up the volume for WAVE in the
Christian Schäfer wrote:
We plan to make a new release. Until now, there has been:
I'd love to see the workaround for picky registrars as well in this
release.
Unfortunately, it cannot be into stable yet:
This code is still a bit experimental. I had issues with it under
certain STUN
it. If not, or if it still is not accessible,
please
check your audio setup.
---
It is easier to break and stop ekiga now. No need to hard stop but
enable to have some debug info.
Best regards
Eugen Dedu wrote:
Thierry Simonnet wrote:
Hello,
it is now possible to have a version
Hi,
Release often :o)
We plan to make a new release. Until now, there has been:
- Fixed crash when device list contains non-latin1 chars (still to be
checked)
- Fixed crashes shown as assertion failed in
/usr/include/ptlib/safecoll.h:813
- Windows fixes
- 2009-07-22 03:54 rjongbloed
Thierry Simonnet wrote:
Hello,
it is now possible to have a version of Ekiga for windows.
I noticed with the last trunk version (this morning) I can't activate
any iaudio input. I can call without trouble but only if audio input is
on SILENT. I tested it with a camera with mic and with a
Christian Schäfer wrote:
We plan to make a new release. Until now, there has been:
I'd love to see the workaround for picky registrars as well in this
release.
Me too.
--
Eugen
___
Ekiga-devel-list mailing list
Ekiga-devel-list@gnome.org
Michael Rickmann wrote:
Christian Schäfer schrieb:
Eugen Dedu wrote:
I see a commit in opal which might interest you:
2009-07-13 06:33 rjongbloed
* src/sip/handlers.cxx: Added special case of m_contactAddress *=
%LIMITED for SIP registration which will only fill the
Contact
Michael Rickmann wrote:
Am Samstag, den 18.07.2009, 21:54 +0200 schrieb Eugen Dedu:
Michael Rickmann wrote:
Ekiga's handling of Windows file names and device names is done mostly
in UTF-8 which works as long as there are no national characters in the
names. I have a German Windows and a USB
Eugen Dedu wrote:
Michael Rickmann wrote:
Am Samstag, den 18.07.2009, 21:54 +0200 schrieb Eugen Dedu:
Michael Rickmann wrote:
Ekiga's handling of Windows file names and device names is done
mostly in UTF-8 which works as long as there are no national
characters in the names. I have a German
Michael Rickmann wrote:
Ekiga's handling of Windows file names and device names is done mostly
in UTF-8 which works as long as there are no national characters in the
names. I have a German Windows and a USB headset which in Ekiga shows up
as USB-Ger instead of USB-Gerät (USB device). Ok, I
Michael Rickmann wrote:
I am trying to prepare a Win32 version of Ekiga 3.2.5 for ekiga.org and
realized that I had to pick a few items from Opal HEAD and Ekiga master.
For Ekiga I think that the following Win32 commits are safe to be merged
into stable from where they can be picked up for the
Michael Rickmann wrote:
Ekiga's handling of Windows file names and device names is done mostly
in UTF-8 which works as long as there are no national characters in the
names. I have a German Windows and a USB headset which in Ekiga shows up
as USB-Ger instead of USB-Gerät (USB device). Ok, I
yannick wrote:
Eugen Dedu a écrit :
yannick wrote:
Damien Sandras a écrit :
Le vendredi 10 juillet 2009 à 11:17 +0200, yannick a écrit :
Damien Sandras a écrit :
Le vendredi 10 juillet 2009 à 10:49 +0200, yannick a écrit :
That's what I thought. By default, only a few codecs are enabled
Damien Sandras wrote:
Le lundi 06 juillet 2009 à 20:20 +0100, Peter Robinson a écrit :
So we are preparing a new stable release. What are the blocking bugs?
- picture in picture does not work sometimes
- -d 4 warnings about too many consecutive I-frames, still investigating
if it is harmful
Christian Schäfer wrote:
Hi,
audio seems to be still a game of luck with current ekiga's stable
release. Sometimes when I answer an incoming call, I can't hear the
caller and he can't hear me. Sometimes I can hear him, sometimes I can't
but he can. There doesn't seem to be any rule for this
yannick wrote:
Eugen Dedu a écrit :
Hi,
So we are preparing a new stable release. What are the blocking bugs?
- picture in picture does not work sometimes
- -d 4 warnings about too many consecutive I-frames, still investigating
if it is harmful or not
- initially greyed image, seems only
Craig Southeren wrote:
Damien Sandras wrote:
..deleted
Do we need a workaround for this before a proper fix? (TCP support)
TCP support.
Opal has the basic support for TCP, and has had for some time. To try it
out, make sure you have a TCP listener on the same port as UDP listener
(in
yannick wrote:
Eugen Dedu a écrit :
Hi,
So we are preparing a new stable release. What are the blocking bugs?
- picture in picture does not work sometimes
- -d 4 warnings about too many consecutive I-frames, still investigating
if it is harmful or not
- initially greyed image, seems only
- Other minor fixes
- Updated translations: bn_IN, el, or
- Updated help translations: el
Special thanks to Robert Jonglobed, from ptlib/opal team, for various
crash fixes.
On behalf of Ekiga/ptlib/opal teams,
Eugen Dedu
___
Ekiga-devel-list mailing list
Hi,
So we are preparing a new stable release. What are the blocking bugs?
- picture in picture does not work sometimes
- -d 4 warnings about too many consecutive I-frames, still investigating
if it is harmful or not
- initially greyed image, seems only cosmetic, still investigating
Are
Christian Schäfer wrote:
Hi,
it seems that I encountered a bug in ekiga (or ptlib). I just did a
pc-to-phone call which wasn't successful. Instead the cpu usage went up
to 100% and I had to kill the ekiga process. The -d4 output is at
http://home.in.tum.de/~schaefer/ekiga/ekiga.log.FAIL.
Let
Peter Robinson wrote:
The problem is that your router replaces the public IP address Ekiga
puts in by a private one due to a bug in the router itself, you can see
the Ekiga PDUs in the log, they are correct.
If you disable STUN, perhaps your router will put the public IP address
in the packets.
Peter Robinson wrote:
Hi All,
I noticed the next stable release of gnome is due soon. Out of
interest is there anything currently on the blocking list for the
ekiga 3.2.5 release?
Hi Peter,
Unfortunately, the blocker bug is the same as before, see
Michael Cronenworth wrote:
Eugen Dedu on 06/25/2009 02:27 PM wrote:
There is something I do not understand. It is not possible to compile
ekiga from windows (cf.
http://wiki.ekiga.org/index.php/Cross-compile_Win32#Understanding_the_cross-build_script)
So I meant to modify Makefile so
Michael Cronenworth wrote:
Julien Puydt on 06/25/2009 01:49 PM wrote:
Hi,
I would like to know if the win32/ directory in ekiga's master is up to
date : can I use it to test things?
It depends on what OS you are building on. The files in win32/ are meant
for Debian. For Fedora or Windows
Michael Cronenworth wrote:
Eugen Dedu on 06/25/2009 02:07 PM wrote:
Couldn't we customize it right now (in git) to take into account both OSes?
Sure, you could have a Makefile if test based on what `uname -s` or
/etc/system-release reports. I neither have the time nor initiative
Michael Cronenworth wrote:
Eugen Dedu on 06/25/2009 02:15 PM wrote:
Is it difficult? Are there only 5 if-s to be declared inside Makefile
or it is more complicated?
No. Here's a primitive example:
OS_TYPE := $(shell uname -s)
ifneq (,$(findstring MINGW,$(OS_TYPE)))
BUILD_TARGET = WINDOWS
Julien Puydt wrote:
Eugen Dedu a écrit :
Eugen Dedu wrote:
Julien Puydt wrote:
Eugen Dedu a écrit :
Luca Capello wrote:
Hi Julien!
On Sun, 07 Jun 2009 18:40:43 +0200, Julien Puydt wrote:
Luca Capello a écrit :
1) Ekiga requires too much disk space:
[...]
I would like a minimal
Damien Sandras wrote:
Le mardi 23 juin 2009 à 14:39 +0200, Michael Rickmann a écrit :
I can not convince recent git revisions of ekiga to register with my
phone provider (1und1.de). I get an could not register (Forbidden,
please check that username and password are correct) answer, same error
Michael Rickmann wrote:
I checked ekiga.net requires a password. However, Ekiga seems to pick up
a password change only the next time it is started.
Please write a bug report...
--
Eugen
___
Ekiga-devel-list mailing list
Ekiga-devel-list@gnome.org
Michael Rickmann wrote:
needs considerably longer to shutdown than it took one week ago and does
As already said, I have this one too; on shutting down:
[...]
2009/06/17 19:12:07.477 0:15.096 Network In...0xe733a950 IfaceMon
Finished interface monitor thread.
2009/06/17 19:12:07.480
Michael Rickmann wrote:
longer. Also the subcriber threads do not terminate any longer. Ekiga
needs considerably longer to shutdown than it took one week ago and does
I noticed it too...
Another point: Ekiga cannot be compiled since opal version 2258 because
the SIPEndPoint::Message form
Michael Rickmann wrote:
Eugen Dedu schrieb:
Michael Rickmann wrote:
longer. Also the subcriber threads do not terminate any longer. Ekiga
needs considerably longer to shutdown than it took one week ago and does
I noticed it too...
Sorry, this was about longer shutdown, not about threads
Luca Capello wrote:
Hi there!
On Sun, 17 May 2009 22:36:03 +0200, Luca Capello wrote:
OTOH, the last time I tried it (in August 2008 at DebConf8) I was not
able to make/receive any call and since then I just gave up.
2) the wizard is not working properly at 480x640, too much text which
Luca Capello wrote:
Hi Julien!
On Sun, 07 Jun 2009 18:40:43 +0200, Julien Puydt wrote:
Luca Capello a écrit :
1) Ekiga requires too much disk space:
[...]
I would like a minimal version with no GNOME libraries (Bonobo
Co.), just Opal, PTlib and the minimum required GTK+, full stop.
Luca Capello wrote:
Hi there!
On Sun, 07 Jun 2009 17:59:11 +0200, Luca Capello wrote:
debian-gta02:~# DISPLAY=:0.0 gdb ekiga
[...]
Program received signal SIGSEGV, Segmentation fault.
[Switching to Thread 0x429be410 (LWP 2476)]
0x40ffd7d0 in ?? () from /usr/lib/libgtk-x11-2.0.so.0
(gdb) bt
Luca Capello wrote:
Hi there!
My Openmoko GTA02 Neo FreeRunner is connected to my laptop thanks to its
USB port following the instructions at
http://wiki.openmoko.org/wiki/USB_Networking
Basically, every time the USB cable is plugged in:
=
iptables -t nat -s 192.168.0.202 -A POSTROUTING
. The
deadline is soon and I cannot manage to do what I want.
I looked mainly to rtp.cxx and mediastrm.cxx of the lib opal. Do I have to
look at ptlib?
I propose you to use the opal upstream mailing list for opal/ptlib
questions: opalvoip-u...@lists.sourceforge.net
--
Eugen Dedu
Peter Robinson wrote:
Hi Eugen,
Is there a list of blockers for this crash/freeze/hang-free ekiga ;-)
Is there anything that needs further testing etc?
Just before doing the release, I checked my connection to 5...@ekiga.net
with the new release and I had a bug which I wait to be fixed (I
Peter Robinson wrote:
Hi All,
I have 5 accounts configured in my ekiga setup for various testing.
When at home they all register fine, when at work the whole process
varies somewhat. I usually have 2 accounts that register fine which
means its not a firewall issue (not that it would surprise
Hi,
Many fixes for crashes have accumulated since last stable (10 days ago).
We would like to release another stable version. Our secret goal :o)
is to have a (nearly) crash/freeze/hang-free ekiga. When people,
especially distribution maintainers (windows included :o)), would like
it to
Dave Allan wrote:
Hi all,
It looks like the SVN trunk build is broken following a fresh checkout
of ptlib, opal ekiga. I can't spend any time troubleshooting it
today, but I've attached a log of the error.
I suppose you have downloaded ekiga from svn (so old version), is that
right? You
Hi,
For information, in a few hours 3.2.1 stable will be released.
--
Eugen
___
Ekiga-devel-list mailing list
Ekiga-devel-list@gnome.org
http://mail.gnome.org/mailman/listinfo/ekiga-devel-list
Michael Rickmann wrote:
Am Freitag, den 15.05.2009, 21:10 +0200 schrieb Eugen Dedu:
Michael Rickmann wrote:
Am Freitag, den 08.05.2009, 17:40 +0200 schrieb Eugen Dedu:
Michael Rickmann wrote:
Am Freitag, den 08.05.2009, 13:41 +0200 schrieb Eugen Dedu:
Hi,
Windows build is currently delayed
, kn, nb, or, zh_CN
- Updated help translation: el, es
Special thanks to Julien Puydt, Michael Rickmann, Mounir Lamouri,
Eugen Dedu, Jan Schampera and Yannick Defais for their continuous work
on Ekiga.
On behalf of Ekiga team,
Eugen Dedu
___
Ekiga-devel
Michael Rickmann wrote:
Am Freitag, den 15.05.2009, 21:10 +0200 schrieb Eugen Dedu:
Michael Rickmann wrote:
Am Freitag, den 08.05.2009, 17:40 +0200 schrieb Eugen Dedu:
Michael Rickmann wrote:
Am Freitag, den 08.05.2009, 13:41 +0200 schrieb Eugen Dedu:
Hi,
Windows build is currently delayed
Akiva Torenheim wrote:
Ekiga Dev Community Hello!
I wonder why the lead Open Source VoIp application has no Version for
OpenMoko.
Well, there are many platforms around, and ekiga devs do what they can.
But you can change that: be the first to port ekiga to openmoko!
Could you help?
Michael Rickmann wrote:
Am Freitag, den 08.05.2009, 17:40 +0200 schrieb Eugen Dedu:
Michael Rickmann wrote:
Am Freitag, den 08.05.2009, 13:41 +0200 schrieb Eugen Dedu:
Hi,
Windows build is currently delayed by a few bugs. Couldn't we just
create a windows build from the stable branch
Michael Rickmann wrote:
Am Freitag, den 08.05.2009, 17:40 +0200 schrieb Eugen Dedu:
Michael Rickmann wrote:
Am Freitag, den 08.05.2009, 13:41 +0200 schrieb Eugen Dedu:
Hi,
during normal program usage when objects are freed. I vote for fixing
the crash on exit feature first
Hi,
What's the pound key (hear upon calling 500)?
--
Eugen
___
Ekiga-devel-list mailing list
Ekiga-devel-list@gnome.org
http://mail.gnome.org/mailman/listinfo/ekiga-devel-list
Michael Rickmann wrote:
Am Freitag, den 08.05.2009, 08:54 -0500 schrieb Michael Cronenworth:
Original Message
Subject: [Ekiga-devel-list] windows stable branch
From: Eugen Dedu eugen.d...@pu-pm.univ-fcomte.fr
To: Ekiga mailing list ekiga-devel-list@gnome.org
Date: 05/08/2009
Aragon Gouveia wrote:
Hi
Eugen Dedu wrote:
Aragon Gouveia wrote:
Hi,
I would like to try get Ekiga 3 running on FreeBSD with the hope of
getting a working port together.
I have got it sort of working. I'm using Ekiga 3.0.2, Opal 3.4.4,
and Ptlib 2.4.4 (which is already ported
Aragon Gouveia wrote:
Eugen Dedu wrote:
Could you please inform opal-voip mailing list about all that?
Will do, thanks, and will keep this list updated with my progress.
Very well!
For the patches: are all the changes to be applied upstream, or some
of them are only cosmetic? For ex
Michael Rickmann wrote:
Am Donnerstag, den 30.04.2009, 16:41 +0200 schrieb Eugen Dedu:
Hi,
After the update of revision.h I receive the following wraning:
Making install in src
/bin/sh: line 0: cd: ../.git: No such file or directory
fatal: Not a git repository (or any of the parent directories
Hi,
After the update of revision.h I receive the following wraning:
Making install in src
/bin/sh: line 0: cd: ../.git: No such file or directory
fatal: Not a git repository (or any of the parent directories): .git
/bin/sh: line 0: cd: ../.git: No such file or directory
fatal: Not a git
Eugen Dedu wrote:
Julien Puydt wrote:
- contact settings are not migrated from 2.0.x to 3.x,
http://bugzilla.gnome.org/show_bug.cgi?id=554402
Sorry, I have misunderstood this bug. It is not as important as the
others, it can be fixed later from my point of view.
--
Eugen
Michael Rickmann wrote:
Ekiga SVN commit 7653 seems not complete. It is apparently based on a
discussion on this list in February:
http://mail.gnome.org/archives/ekiga-devel-list/2009-February/msg00042.html .
At the moment I work with Ubuntu Intrepid on git master and get circular
inclusion of
Michael Rickmann wrote:
Am Sonntag, den 19.04.2009, 09:00 +0200 schrieb Julien Puydt:
Michael Rickmann a écrit :
First we should decide whether the resources are moved to the win32
subdirectory. With my patch the resources would remain in the base
directory. I think that files containing
Michael Rickmann wrote:
Am Sonntag, den 26.04.2009, 15:31 +0200 schrieb Eugen Dedu:
Michael Rickmann wrote:
Ekiga SVN commit 7653 seems not complete. It is apparently based on a
discussion on this list in February:
http://mail.gnome.org/archives/ekiga-devel-list/2009-February/msg00042.html
Michael Rickmann wrote:
Am Sonntag, den 26.04.2009, 17:00 +0200 schrieb Eugen Dedu:
Michael Rickmann wrote:
Am Sonntag, den 26.04.2009, 15:31 +0200 schrieb Eugen Dedu:
Michael Rickmann wrote:
Ekiga SVN commit 7653 seems not complete. It is apparently based on a
discussion on this list
Here are the various descriptions of Ekiga. Some of them speak about
phone, they should be changed. How?
ekiga.desktop.in.in:
_Name=Ekiga Softphone
_GenericName=IP Telephony, VoIP and Video Conferencing
_Comment=Talk to and see people over the Internet
win32/ekiga-rc.rc:
VALUE
Michael Rickmann wrote:
Building Win32 Ekiga from current heads is not straightforward. Ekiga,
Ptlib and Opal seem to have regressed in some aspects.
1) In Ekiga videooutput-manager-dx.cpp can not be compiled. I tried to
fix it with attached patch. There were two major issues: Where does
Peter Robinson wrote:
Might be better to have Talk to and see people over the internet
Done, thanks!
On Mon, Apr 20, 2009 at 5:14 PM, Eugen Dedu
eugen.d...@pu-pm.univ-fcomte.fr wrote:
Hi,
I am writing the doap file.
The shortdesc should be changed, because it speaks only about talk
Dave Allan wrote:
Hi all,
I just did a new checkout of ptlib, opal ekiga and found that the opal
build is broken:
make: *** No rule to make target
`/ekiga/opal/lib_linux_x86/obj/opalglobalstatics.o', needed by
`/ekiga/opal/lib_linux_x86/libopal_s.a'. Stop.
I looked at the svn logs, and
Shiva wrote:
Hi team,
I'm a new member of this group. I need one SIP client, so i
selected 'Ekiga'. I tried to compile the source by './configure', I'm facing an
error. The error is mentioned below:
checking build system type... i686-pc-linux-gnu
checking host system type...
Sumathi wrote:
Hi All,
I have downloaded Ekiga source to work with Ekiga..
I am using Eclipse IDE to work with the Ekiga.
While i am building an Ekiga source, i am getting following error message.
the error message are attached..
Well, config.h is in /home/parasuraman/Workspace_cpp/Egika and
Hi,
I am writing the doap file.
The shortdesc should be changed, because it speaks only about talk,
not video.
Now it is
shortdesc xml:lang=enTalk to people over the Internet/shortdesc
and i want to change it to
shortdesc xml:lang=enTalk to people and see them over the
Michael Rickmann wrote:
Am Sonntag, den 19.04.2009, 18:53 +0200 schrieb Eugen Dedu:
Michael Rickmann wrote:
Am Samstag, den 18.04.2009, 14:57 +0200 schrieb Julien Puydt:
Eugen Dedu a écrit :
Is there a way to move ekiga.rc from root to win32?
1) git mv ekiga.rc win32/
2) make sure any file
Peter Robinson wrote:
Is there a way to move ekiga.rc from root to win32?
1) git mv ekiga.rc win32/
2) make sure any file referencing ekiga.rc now searches for it in
win32/
Snark
Could you please rename it so that the basename is distinctive, e.g.
ekiga-rc.rc ? I ask this because eventually
Michael Rickmann wrote:
Am Montag, den 20.04.2009, 19:38 +0200 schrieb Eugen Dedu:
Michael Rickmann wrote:
Am Montag, den 20.04.2009, 18:49 +0200 schrieb Eugen Dedu:
Michael Rickmann wrote:
Am Sonntag, den 19.04.2009, 15:01 +0200 schrieb Eugen Dedu:
Hi,
Is win32/diff/ptlib_pwlib.pc.in
Michael Rickmann wrote:
Am Montag, den 20.04.2009, 18:12 +0100 schrieb Peter Robinson:
Is there a way to move ekiga.rc from root to win32?
1) git mv ekiga.rc win32/
2) make sure any file referencing ekiga.rc now searches for it in
win32/
Snark
Could you please rename it so that the basename
Julien Puydt wrote:
Michael Rickmann a écrit :
Windows does not know getpwuid, getuid and the associated header file
entries as introduced by 7862. However, glib-2.0 contains the function
g_get_real_name which works for Windows. Eugen, would something like
attached patch work for Linux too?
Michael Rickmann wrote:
Am Samstag, den 18.04.2009, 14:57 +0200 schrieb Julien Puydt:
Eugen Dedu a écrit :
Is there a way to move ekiga.rc from root to win32?
1) git mv ekiga.rc win32/
2) make sure any file referencing ekiga.rc now searches for it in win32/
Snark
Could you please rename
Hi,
In order to fix the bug Ekiga doesn't recognize webcam with non-UTF
chars (http://bugzilla.gnome.org/show_bug.cgi?id=575907) I need to
create two functions latin2utf and utf2latin. They will be used in
lib/engine/components/ptlib/*.cpp. latin2utf is also used in
Damien Sandras wrote:
Le dimanche 05 avril 2009 à 23:32 +0200, Eugen Dedu a écrit :
Hi,
What does it mean *.wav (PTLIB/WAVFile) in preferences, audio devices?
(It appears also as *.avi in video devices).
It should be blacklisted. That's a PTLIB module to read from files. We
do
Peter Robinson wrote:
I'm failing to register to the ekiga.net service at the moment. Is it
currently down? Website seems OK though.
I cannot register either...
--
Eugen
___
Ekiga-devel-list mailing list
Ekiga-devel-list@gnome.org
Hi,
I see that you uses ekiga 3.0.0. Could you use ekiga SVN trunk (better)
or SVN gnome-2-26 branch? Probably these errors have been fixed since
ekiga 3.0.0.
Cheers,
Eugen
Mahesh Sukumar wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Now that the gnome-doc-utils.make problem is
Hi,
What does it mean *.wav (PTLIB/WAVFile) in preferences, audio devices?
(It appears also as *.avi in video devices).
--
Eugen
___
Ekiga-devel-list mailing list
Ekiga-devel-list@gnome.org
http://mail.gnome.org/mailman/listinfo/ekiga-devel-list
Haeernilion wrote:
Hi,
First of all, I'd like to thank everyone contributing to developing this
great application and I hope to be able to contribute myself in the near
future. A few weeks ago, I namely started working on a students project,
which consists in upgrading Ekiga to permit
Michael Rickmann wrote:
Ok I have submitted the two bug reports
https://sourceforge.net/tracker/?func=detailaid=2728003group_id=204472atid=989748
https://sourceforge.net/tracker/?func=detailaid=2728037group_id=204472atid=989748
Another Win32 issue, the crash on exit one: I have been fighting
501 - 600 of 757 matches
Mail list logo