[Elecraft] FS: Elecraft K2

2004-09-23 Thread Meier, Peter H.
Please view at http://www.zerobeat.net/classpro/viewads.html ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.):

[Elecraft] RE: Elecraft Digest, Vol 5, Issue 24

2004-09-23 Thread Edward R. Breneiser
Hello all, I've been reading the mail about portable antennas etc. If you need a portable antenna take a look at: http://www.wa3wsj.com 72, Ed, WA3WSJ ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to

[Elecraft] WA3WSJ Portable Antennas

2004-09-23 Thread Jim Brown
Wow -- there are some VERY nice packages on your webpage, Ed. I particularly like the ones utilizing the telescoping pole. How does your pole differ from the DK9SQ pole? I see that it is shorter. Our ham club held our annual QRP night a week or so ago, where a half dozen or so of us each

Re: [Elecraft] K2/100 power-out change

2004-09-23 Thread Rich McCabe
On my first K2 I soldered in a 10 turn 1k pot so did not go as high as 1200. Have not tried it on the second K2, but will probably give it a try this weekend. Funny you would mention the KAT100. Built one last night and building another this weekend. The CAL went OK on this one. For those

[Elecraft] OT: HFProp update / Amateur Radio Banner Exchange

2004-09-23 Thread Julian, G4ILO
A number of Elecraft users downloaded the HFProp program I released a year or so ago. This is just a note to say that I have recently released a new version, 1.3, with several new features, including the ability to download the solar data from WWV. I'd also like to encourage those of you with

RE: [Elecraft] SSB-TX-Signal is too bassy

2004-09-23 Thread Ron D'Eau Claire
Shift the BFO frequencies so your spectrogram display shows that you are cutting off a bit more of the low end (end nearest the carrier) and leave a little more of the high frequencies (farthest from the carrier) inside the bandpass. Spectrogram is great, but I'd never count on a scope display to

[Elecraft] Encoder Z1

2004-09-23 Thread JEAN-FRANCOIS MENARD
I observed that sometime, 1 out of 100, when I turn Z1 to change or tune frequency, it goes up only 0.01 or down 0.01 too and stuck at this frequency. But if I only tork a little, little bit the Z1 encoder, everything return to normal every time. What is it wrong with the Z1 encoder, bad or

[Elecraft] N2CQ QRP Contest Calendar Sep 25 - Oct 31, 2004

2004-09-23 Thread Ken Newman
~~ N2CQ QRP CONTEST CALENDAR September 25-Octber 31, 2004 ~~ CQWW RTTY DX Contest ... 150w Category Sep 25, z to Sep 26, 2400z Rules:

[Elecraft] Cal AT100 SWR bridge

2004-09-23 Thread Rich McCabe
Is there any tricks (or improved techniques) on adjusting the SWR bridge in the tuner? I just finished a tuner and everything checked out and calibrated very easy. But I may have a SWR that agrees on my Daiwa in the line 16 away or it may be as high as 4:1 on some bands even when the tuner says

[Elecraft] K2 Mods list: September updates

2004-09-23 Thread Sverre Holm
The K2 unofficial modifications list on www.qsl.net/la3za/K2/mod.html has been updated with: - Anti-VOX circuit for the KSB2 - A clarification of the RF filter on input of compressor of KSB2 - ALC modification for the KSB2 KI6WX increased RF gain mod The KSB2 modifications list has now been

[Elecraft] using maldol whip with kx1

2004-09-23 Thread Gary Lee
Just got my maldol whip with 40 and 20 meter coils. Need some suggestions on how to use them efficiently. I will not be walking with them, got to use my ears for things like crossing streets and dodging college students. Also, where do you get a cable with a female bc on one end? Thanks

[Elecraft] Favorite pre-assembled BNC/Coax cable vendor?

2004-09-23 Thread Doug Forman
Greetings everyone, Anyone have recommendations for a great place to buy pre-assembled BNC-to-BNC and/or BNC-to-PL259 cable assemblies in various lengths? Thanks 73's Doug N7BNT ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You