I'll try to keep this short (again).
I'm in the process of trying to design a circuit for use by mobile HF
operators to assist them with remotely tuning their antennas from the
driver's seat.
The circuit I _was_ going to use requires a couple LM-358 Dual OpAmps
and a single 74LS629 dual
Hi Folks,
I'm selling my K2 #3641 with the KBT2 battery option. $500.00 USD which
includes shipping to U.S or Canada. Rig works great ... but has been
collecting dust so needs a proper home.
Paypal payment preferred. Please contact me off list with any questions.
--
Chris VA7CAB
Some discussion lately on using the K2 to drive the HF Packer Amp. I
bought the amp kit some time ago and have not yet built it. My main reason
for buying was to use it to beef up a KX1 signal.
Has anyone had any experience driving the Packer Amp with a KX1? My KX1
puts out 4 watts on 40
400W PEP (26dBW)
73!
BKA (TA2RX)
What are you all talking about with 400/800.. Peak or key down. I
have had
probably a half dozen amplifiers in the last 50 years., 2 of which were
home brew...
They would put out 500-600 watts key down. That was always enough for me!!
g
I think I could be
Part II Alignment and Test for K-2 #5266 went A-OK...all within specs...that
sure is a good feeling! Taking it slow and easy but continue to be impressed
with the top quality of this product!
H Cary, K4TM
Lynchburg, Va
___
Elecraft mailing list
Post
Doing some closet cleaning and found a KIO2 that I got
when I bought a used K2. It is unbuilt and still in
the plastic bag. Don't think I will ever connect my K2
to a computer so off to a new home it shall go.
Will ship continental US for $65. Email direct.
73 de w1mt
Mike
I have an odd request. Any one who has such a key ,could you
please tell me the thickness of the base. Please reply directly.
Thank youGil K8EAG
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a
I'm having a difficulty with the power control in a freshly built
KPA100. When I set the power to 50W then key up (TUNE), I get appx 25W
(indicated on the K2 and external wattmeter). If I barely move the
POWER control on the K2 output will jump to 50W indicated on both the K2
and wattmeter.
This is not mine; I'm selling it for J. Frank Brumbaugh, W4LJD, a retired
engineer in his mid 80s, getting out of ham radio. (He used to provide a lot
of material for my column in the QRP Quarterly.) After I agreed to sell it
for him and he shipped it to me I played around with it on and off for a
have seen nothing on the list all day.
John
WA8KNE
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
Just had the the Capitol City Hamfest sponsored by
JARC in Jackson, MS and it was a success, IMHO. I set
up an Elecraft table and demonstrated my K2 and
KPA100/KAT100 in an EC2. I ran the Power Point
presentaion on my laptop and had a notebook of
pictures printed from the website of PA3CEV.
Somewhere I saw a recommended mod to ground the front panel mic connector
body. I am unable to locate this now. Can someone point me in the proper
direction?
Thanks and 73,
Charlie, W0YG..
___
Elecraft mailing list
Post to:
Thanks to all concerning this issue. Looks like I can
go ahead with my plans.
73,
Mark Baugh
W5EZY
Grenada MS
__
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
We often lose sight of those closest to us and I sure did!
Radiofest held in Seaside, CA- just a few short miles from Elecraft is
held February 25th from 7am to 2pm.
Elecraft will be there in full force with products to view, touch and sell!
Come on by and enjoy a beautiful day in the
That may be TOO much drive for the HF PAcker! I drive one on 160-20 meters
with a K1 and it takes about 1.5-2.0 watts to make the HF Packer deliver 35
watts out.
If you can't control the power output of the KX1, then you may have to change
the
values of the attenuator network in the input path
On Feb 6, 2006, at 6:03 PM, Lisa Jones wrote:
We often lose sight of those closest to us and I sure did!
Radiofest held in Seaside, CA- just a few short miles from Elecraft
is held February 25th from 7am to 2pm.
Elecraft will be there in full force with products to view, touch
and sell!
I've been cruising through the assembly manual with no trouble at all until
I got to the VCO alignment. I can't get the measured voltage at R30 down
below 6.35 volts. I've installed the Rework Eliminator headers and I've set
the extended vfo range menu setting D19 to 'Y'. I've double-checked
Earlier post:
I'm having a difficulty with the power control in a freshly built
KPA100.
snip - remove incriminating evidence
Thanks to Philip WD8QWR I have learned my K2 and KPA100 are working as
they should. Now to re-do the FWD and REV adjustments I have been
twiddling for two days.
Hi,
Michael VE3WMB and Martin VA3SIE set up a vertical and
an inverted vee in Britannia park in the City of
Ottawa.
It was 38F and we had some wind-chill, but it didn't
snow and we even had little snatches of sunlight.
We operated casually for just 3 hours of the contest.
Here is our story:
Read the manual, Bill. When you push Tune, the power out is limited
to 20 watts. You can bypass this feature by pushing Tune and Display
at the same time. Read the manual, Bill.
best wishes,
dave (Read the manual, Bill), w1euy
On Feb 6, 2006, at 6:42 PM, Bill Coleman N2BC wrote:
I'm
The Heil web site and dig around, it's dere.
Dick, NJ9K
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Charlie, W0YG
Sent: Monday, February 06, 2006 12:20
To: Elecraft Reflector
Subject: [Elecraft] Grounding mic connector body on K2 front panel board
Ken and I are in the process of moving our website to http://unpcbs.com
Along with this move we now have several new and simpler email addresses.
See our About Us webpage for details.
--- - - - ---
For those of you contemplating building your first (or your
Elecrafters:
I had been intending to build a K2. Unfortunately, it looks like my
1983 vintage Argosy is reaching the end of its life sooner than I
expected, and alas, I am too busy with work responsibilities to build
a rig right now.
Anyway, I'm in the market for an already built K2. One
23 matches
Mail list logo