I'm thinking about purchasing KPA100 and KAT100 for my K2.
Is the following true? KAT100 occupies AUX port of KPA100
and makes controlling K2 from PC (MixW etc) impossible.
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a
Put the RANT ON function
under one of the PF keys to
quickly switch it on and off.
de Joe, aa4nn
- Original Message -
From: Jim Miller [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Cc: Elecraft@mailman.qth.net
Sent: Sunday, April 08, 2007 11:32 PM
Subject: Re: [Elecraft] RxAnt?
excellent,
Veeerrry interesting! Mine (#2136) does it also but the room has to be
dark.
Russ, N3CO
- Original Message -
From: Mike Morrow [EMAIL PROTECTED]
To: elecraft@mailman.qth.net
Sent: Sunday, April 08, 2007 12:22 PM
Subject: Re: [Elecraft] K1 Battery Voltage Readout Question - Blinking
I have an 718 with the 250 Hz filter. That filter locks down things
quite well, but it also allows blow by with large nearby signals that
make things difficult also. In the short time I have been a CW op, the
skill that Ron mentions is just starting to get to me. I have often
been frustrated
Do the kits come with everything to make a Y cable or do you need to
order extra?
David Wilburn
[EMAIL PROTECTED]
K4DGW
K2 #5982
Gerard Provoost wrote:
No, not true. From the plug in the AUX port in the KPA100 come two
cables, one to your computer serial port and one as control to the KAT
Circumstances dictate what we do in life.
Circumstances DICTATE that I offer for sale my K2 #5804 (kit price $629)
with KAT2 ($169)and the Bencher RJ-1 ($105) that I use for a firm price
of $650 (MSRP $903).USPS MO preferred.
Also my KX1 #1727 ($299) with 30m mod ($29) KXAT ($89) with an
I did a head to head comparison between my K2 and a near-mint TS-830s.
The 830s had dual 500 Hz factory filters (one in each IF) plus VBT to
narrow things even further. The K2 is a late model unit and I put in 2
ground connections on each Xtal in the filter (per instructions).
I found the K2 to
I just placed the order for the 100 watt amp.
I figured if I want to rag chew on CW I might need more then
the 12 to 14 watts of basic K2.
Besides, the Elecraft stuff is so fun to build!
Despite being sick all week and having a death in the family,
I have been speeding up my CW copy, with only
Dave and all,
OK, the way it works is: The KPA100 (or KIO2) comes with a cable and 2
connectors (and backshells) to build the cable to connect to the
computer. The KAT100 kit contains a length of cable and one connector
to go onto the KAT100 end.
The pins for the cable to the computer
David Wilburn wrote:
Do the kits come with everything to make a Y cable
Yes
Be sure to read [and understand] the warnings about the IO connector.
It is **NOT** a standard RS-232 serial port!
Fred K6DGW
- Northern California Contest Club
- CU in the 2007 CQP Oct 6-7
- www.cqp.org
I guarantee that it does. But *only* while the LCD
is displaying the battery voltage.
Mike / KK5F
Mike, let me correct my statement, you are correct.
Looked at the ATTN LED in a darker darkend room and
YES it is there.
73, Ty, W1TF, K1 #1423
Brett gazdzinski wrote:
I sent an Email to Jack Smith about a Z90 panadaptor kit,
but there are none left.
That would have been just the thing to go with the homebrew receivers
and the K2.
For Brett and the list. Yes, all the Z90/91 kits are spoken for.
However, if there is enough
Ralph Tyrrell wrote:
Mike, let me correct my statement, you are correct.
Looked at the ATTN LED in a darker darkend room and
YES it is there.
73, Ty, W1TF, K1 #1423
darker dark end room?
Is this a newer new grammar?? :-)
sorry Ty, I couldn't resist ...
Ron, wb1hga
if you see a fork in
Doug, Jim, Tom,
thanks for resolving my doubts!
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Hi Brett,
First, my condolences to you and your family for the recent death in your
family.
I split my kpa100 into an EC2 enclosure with the kat100 this past winter. If
you search the reflector archives, you will find lots of info for doing
this. I used the info found on Lyle Johnson's KK7P
KX1 has been sold. Thanks to all who responded
RC kc5wa
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
Still available
I offer for sale my K2 #5804 (kit price $629) with KAT2 ($169)and the
Bencher RJ-1 ($105) that I use for a firm price of $650 (MSRP $903).USPS
MO preferred. Please respond off list.
RC kc5wa
___
Elecraft mailing list
Post to:
Hi Jack,
I'm definitely interested in the K2 version panadapter. How about designing it
to fit in the Elecraft EC2 case and selling the boards components and let the
buyer do the packaging. Shouldn't be a big deal for a kit builder to put a few
holes in a case to mount the controls and
Based on the emails I have been getting, I apparently didn't state this
well. I am VERY happy with the level of filtering that I have been
getting from the K2 in CW mode. The ability to turn the AGC off and
drill down with the filters has been a great improvement over the 718.
That being
Additionally, I believe all the Elecraft documentation (for the KPA100
and the KAT100) now cover mounting these in the second enclosure.
David Wilburn
[EMAIL PROTECTED]
K4DGW
K2 #5982
Dave Van Wallaghen wrote:
Hi Brett,
First, my condolences to you and your family for the recent death in
I Gang
I bought the KNB2 noise blanker last week for my K2 so
I can go mobile. My truck has a little bit of ignition
noise from time to time. Well I Got it built installed
it
put in the truck and well I don't see any difference.
I drug out my ft 100d which is going to have to go
back to the
Thanks de RC kc5wa
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Hello,
I am looking for a well buildt K1. Please email me off list.
Vy 73's de oz5abo, Per
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
I read about the possibility of a new Clifton Laboratories design Son of
the Z90 Panadaptor dedicated to the K2. I think that this a good idea
that will prove to be successful. I am interested in a unit with a built
in display. The $75 machined K2 enclosure option seems reasonable.
73,
Bob
Hi Don,
The unseated KX1 Microprocessor was the problem...I checked the
continuity between 2 17 on KX1 U1 and it was a short...tried
re-seating the Microprocessor and viola!...all OK...I shall put a bit of
a con-conductive bolster on top of the chip to ensure it is pushed home
when the
Scott...
I echo previous comments and add a few...
With CW experience, in-the-brain filtering really does develop. It does
take time, but just as assuredly, it does develop.
I have an FT990 with a 250cps filter that I used pretty much all the time.
Got use to it. That said, there were still
I'm a new used K2 owner. I have been getting use to the rig the last week.
In another thread this was said:
quote
I have used Spectogram to align the filters, and I'll be doing that again with a
bit more experience. That made a significant difference in the feel/sound of
the radio. Like you,
This Tuesday evening, the North American QRP CW Club will be holding its
monthly sprint.
Here are the particulars:
Date and time:
Wednesday April 11th, 0030-0230 UTC
(Remember that's Tuesday evening here in the USA) That's 8:30 - 10:30
EDT, 7:30 - 9:30 CDT, 6:30 - 8:30 MDT and 5:30 - 7:30
I did some comparisons between my 756 pro and the K2
on 40 meters tonight, only CW, SSB always hurts my ears
so I cant say about that, plus I don't have the ssb option
added to the K2.
I used headphones, the same antenna, and tuned in strong
and weak signals, some had very close qso's going on,
I would take one if it worked on the K2 and the
455 kHz of the homebrew receivers.
I would use it mostly on the AM mode, those steady carriers
show up real well on a panadaptor!
I don't need anything fancy, but would want a built in
screen. A case is not important, it would be kind of cool
to
Hello.
Anyone have one that they would like to trade?
I have a excellent K2 with all options except the 60m and DSP.
If yours is pristine I can sweeten the deal
with the 100w amp and 100w tuner (both unbuilt in the box), ec2..
Package worth over $1000.
email: n2fq at sbcglobal dot net.
Thanks.
Its been a rough week.
Thanks for the link, I saw that before but did not know
how to get back to it.
Looks very sharp, I could put the amp/tuner away on the floor
out of the way, and could still use the basic K2 barefoot.
And I suppose you can change things around and put the amp
in
There you hit the word I was looking for, rumble. I have the narrow
250 Hz filter in a 706 and a 718. That sums up the difference between
them in the K2. With those filters there is more rumble, and sometimes
the signals blow right by the filters and blast you if you have the
volume up.
Yes, I think there is a lot going on in the modern stuff,
early stages being distorted, stuff getting through the filters,
and other sorts of distortion.
I have been into AM a long time, and fidelity there is important,
and all the modern rigs sound nasty on AM no matter what filters
they have,
i just finished up mounting the front panel board and the controller
board.. ran all the phase 1 tests and alignments, and everything
checks out aok!
woo hoo!
72 de kb8qpt
___
peace,
sergio
photographer, journalist, visionary
www.coffee-black.com
35 matches
Mail list logo