6 meters is not allowed in Thailand. In fact a 6m transmitter is illegal
here.
Charles Harpole, HS0ZCW
[EMAIL PROTECTED]
_
http://im.live.com/messenger/im/home/?source=hmtextlinkjuly07
All,
Can one of the testers please comment
My main interest in the K3 is for transverter driving from 10m
Can someone provide info on what birdies if any they find around the 10m
band receiver
My K2 was less than acceptable in this hence the reason it got sold
Is the K3 10m section free
K3FAQ sez:
[snip]
What are the K3's binaural effects?
TBD
[end snip]
Any update on this?
Tnx...
de Doug KR2Q
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change,
If you are starting out on 6m, then I would recommend you look at this FAQ.
http://www.qsl.net/w4sat/sixmeter.htm
The UKSMG is another good source of information. http://www.uksmg.org
I use a K2 and XV50 on 6m - an excellent combination. But looking forward
to getting my K3 and trying this on
My virus protection sends me the following message every to send an email. Do
you know anything about this?
*** PLEASE DO NOT REPLY TO THIS NOTIFICATION. ***
Trend Micro PC-calling Internet Security has detected a message containing
dangerous software. You will find the message in question
Looks like phishing to me (bad grammar is key)
Matt
KD8DAO
On 7/21/07, John Palmar [EMAIL PROTECTED] wrote:
My virus protection sends me the following message every to send an email. Do
you know anything about this?
*** PLEASE DO NOT REPLY TO THIS NOTIFICATION. ***
Trend Micro PC-calling
Hi Simon:
At 05:40 07/21/2007, Simon Lewis wrote:
Can one of the testers please comment
My main interest in the K3 is for transverter driving from 10m
Can someone provide info on what birdies if any they find around the 10m
band receiver
My K2 was less than acceptable in this hence the
Hello,
I was wondering if anyone else has built a K2 lately. I am in build phase
II and I am to install an RF Choke on the back of the board, it's item ID
is RFC15. The manual says to expect a sub miniature with
Brown-Black-Brown. However, my sub miniature RF Choke is
Green-Brown-Green. Is this a
I'm at the last part of Part II and was really looking forward to the smoke
test today but cannot find R116 for use with the BFO coil. When I did my
parts inventory, I didn't check the resistor tape thinking that since it was
produced by a machine, SURELY it didn't need verifying.
Is
DON'T RESPOND TO IT, NOR OPEN ATTACMENT -
just get rid of it as quickly as possible.
It will infect your PC, for sure! These
fake security emails are being sent out
all the time, by spammers/phyziers (sp?)
Right up there with this, but down one
level, are the we've got a ton of inherited
money
RFC15 should be Brown-Black-Brown (100 uH). I believe the only component in
the K2 with the color code Green-Brown-Green is 5.1 Megohm resistor R116
that goes across L116 that you'll install shortly (page 60 of the rev G
manual).
Ron AC7AC
-Original Message-
From: [EMAIL PROTECTED]
If it's really happening in response to your sending each e-mail (try
sending a message to yourself and see if it happens) it sounds like your
computer already has a virus. If the misspelling (pc-calling instead of
pc-cillin) is really how it appears in the message, the message itself is
part of
Hello
Does anyone knows where to find Hakko products in Europe ? Particularly a 808
desoldering gun...( unless there would be an equivalent product from some other
firm !)
Thanks for any info
73
Jacques F9OJ
___
Elecraft mailing list
Post to:
Jacques,
The Hakko distributor in the UK/EU is Dancap Electronics - info on the 808 here,
http://www.dancap.co.uk/desoldering/808CE.htm
Trevor G0KTN
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the
Steve,
Look more closely at the bands - I would bet it has a green body and you
are confusing the color code bands with the body color.
A green - black - green RF choke would have a value of 5,,000 uH,
and I don't believe that large an inductance would be practical in a
choke of the
Hey Guys,
Thanks everyone for your help, you guys are quick. I found out that I
didn't get an errata sheet with my K2 and Elecraft has replaced the sub
miniature Chokes with larger ones. I guess some people were having
problems with how fragile the minis were. So, I was actually looking at
R116,
Clark,
R116 is normally in the bag with the BFO inductor. It sometimes gets
stuck in the bag, look carefully.
If you have to use a replacement, be certain it has a resistance of at
least 2 megohms (it is really used electrically as an insulator), and it
must be the 1/8 watt size because a
Thanks to all of you who responded, I rechecked the chokes installed to date
and found the little critter (the Good News) had been installed in the wrong
place: namely, RFC15 which calls out a tiny brown body choke. I only had one
such critter and didn't verify the color bands.
The Bad
Hello All,
I'm helping someone who is building K2 #6196, we are talking over the
phone so I haven't been able to actually see or touch the kit.
He is up to the VCO tests and has a problem. Keep in mind..RFC15 is not
installed yet, he said its missing.
He gets at TP1 and gets 8v on all
John Palmar -
Short of going out and buying some expensive
cumbersome security program, I'd download several
of the very good freebee security programs, such as:
SpybotC:\Program Files\Lavasoft\Ad-Aware SE
Ad-Aware.exe - Search Destroy
I run SPYBOT and AD-AWARE about once a week.
On Sat, 21 Jul 2007, [EMAIL PROTECTED] wrote:
I was wondering if anyone else has built a K2 lately. I am in build phase
II and I am to install an RF Choke on the back of the board, it's item ID
is RFC15. The manual says to expect a sub miniature with
Brown-Black-Brown. However, my sub miniature
Fred (FL) wrote:
John Palmar -
Short of going out and buying some expensive
cumbersome security program, I'd download several
of the very good freebee security programs, such as:
snip
a friend of mine with a young teen aged daughter that uses IM pgms a lot.
Mentioned to me he had to use AVG's
Good afternoon/evening Elecrafters,
I have for sale the following:
K2 #755 w/finger dimple
K160RX
KSB2
KNB2
KPA100
KAT100-1
This K2 has been updated to the current K2 configuration regarding
Firmware levels, K2 Keying Bandwidth Mod Kit, K2 Temperature Compensated
PLL Reference Upgrade, K2 BFO
Larry,
RFC15 will not cure the problem, but it is not likely missing. Direct
him to the errata page and he should see that the choke is now one with
a large body - he should install it. If RFC15 is truly missing, he can
temporarily replace it with a short bit of wire.
On the VCO problem,
Hi Gang,
I am having a moving sale so I have several more items
I have found:
KAT1 K1 Internal Auto Antenna tuner - $100 Shipped
This unit is new never used and is assembled except
for the connectors (and not adjusted). All parts
included to install this into your K1 and also the
firmware
Absolutely! I have used AVG Anti-Virus by Grisoft for over four years on
several machines without a single issue. In my experience it is far more
stable and reliable than either of the two highly-advertised brands that
often come pre-loaded on new machines, and it has a much, much smaller
memory
Ron D'Eau Claire wrote:
Downloads take only a few seconds. The paid version (at least) updates
automatically. IIRC the free version simply requires a click on a radio
button.
In the free version, updates are automagically downloaded each day at the time
you set them to do so. Or it can be
I sent Steve this answer off list...but it also answers Clark's
missing R116 question...so I'm posting it to the full list.
dk
Steve...I ran into this same issue with mine a couple of weeks ago and
when I checked with Scott
at Elecraft parts, he said the small green/brown/green was R116
Hi all,
Just wanted to say thanks for the feedback on this, problem
solved. Checking under some pins at U3 revealed a short. All is well
now, and it's on to building the RF board, Part I.
Thanks again,
Will
On Thu, 19 Jul 2007, [EMAIL PROTECTED] wrote:
Just got myself a K2 (yay!) as
Good Evening,
After a quick trip outside I determined I do not need to carry more
wood for the fireplace. Yes, it is July, but the temperature has been
rather chilly. Without a fire it gets into the low fifties in the house.
Thus I am burning wood in what should be the summer. There
30 matches
Mail list logo
