Don't forget touch lamps notorious sources of noise.
(I spent about 15 years chasing noise for a public utility.)
73! Ken Kopp - K0PP
elecraftcov...@rfwave.net
http://tinyurl.com/7lm3m5
__
Elecraft mailing list
Home: http
It sounds like a switching power supply, such as in a charger or device
power supply.
If you can do it, turn off your house breakers one at a time to see if
if it's in your house.
Try a search on rfi @ contesting.com mailing list.
Leigh/WA5ZNU
> Gentlemen,
>
> I'm experiencing an ODD rather broa
Joe Subich, W4TV-4 wrote:
>
>
>
>> In windows Vista and 7, I set the main sound card as the
>> default soundcard. It can also be done in XP but is a PITA.
>
> It is not difficult in XP:
>
>Right click on the Speaker icon in the Taskbar
>Select Adjust Audio Properties
>Selec
Static electricity is YOUR problem, not the K3's. If you are rubbing
your feet over a rug, spray it with static spray. Or ground yourself
on a little bit of static pad that you put there for the purpose. Do
something so you are not a lightning bolt every time you move.
You keep zapping it like t
That's an excellent point Jim! I don't think most folks realize how close
you can get to another station with a K3 and not even know they are there!
I used to have big problems with a fellow who lives about a quarter of a
mile from me--not his fault, but he was just LOUD! Now, I don't even kno
Gentlemen,
I'm experiencing an ODD rather broad noise USUALLY on 20m @ the lower end of
the band (CW) between
14.020 up to about 14.060mhz. It's sort of a mid-pitch level "GROWL" that
VARIES in frequency
(traveling) up and down the aforementioned frequencies, and sometimes more
noticeable in t
What can I do to eliminate the static electricity problem with K3? Every
time I touch the main VFO (A) knob the display goes dark, audio goes off,
frequency changes among other things. After about 5 seconds it recovers but
somewhat off frequency. Just a little foot shuffling will develop enough
Thank you!!
Eric Swartz - WA6HHQ, Elecraft wrote:
>
> Fixed!
> 73, Eric
>
>
> Julian, G4ILO wrote:
>> NZ0T wrote:
>>
>>> When I click on the Nabble link it says it has been deleted. I finally
>>> got here by entering through Nabble.com. Anyone else having that
>>> problem?
>>>
>>>
>>
> In windows Vista and 7, I set the main sound card as the
> default soundcard. It can also be done in XP but is a PITA.
It is not difficult in XP:
Right click on the Speaker icon in the Taskbar
Select Adjust Audio Properties
Select the "Audio" tab
Set the default for "Sound p
Tom,
Take a look at my website www.w3fpr.com - K2 Fixed Audio Output article.
I used to have kits available, and then had only boards, and then Tom
Hammond modified the board to fit between the Control Board and Front
Panel, and offered boards to do that - check www.n0ss.net to see the
document
I'll be getting back to PSK31 with my K2 and was wondering if there is a
place to pick up fixed audio output for input into my PC's sound card. It's
been a while but I seem to recall that I used to pick it from from the
external speaker jack which, of course, isn't fixed.
Tahnks in advance
To
I ran my K3 in the Contest and managed to achieve a claimed score of
1,917,035 in the single operator High power all bands, assisted
category. I operated for around 32 Hours and foolishly slept though the
Saturday morning greyline after staying up too late at the start of the
contest.
This is b
Dave,
The nasty "accidentally changed the sidetone source" gremlin has crept
into your K2 while you were changing something else in the menu..
To chase it out, first lower that St L menu parameter to something more
reasonable (like 15 to 20) or whatever your normal setting was.
Then enter the me
Fixed!
73, Eric
Julian, G4ILO wrote:
> NZ0T wrote:
>
>> When I click on the Nabble link it says it has been deleted. I finally
>> got here by entering through Nabble.com. Anyone else having that problem?
>>
>>
> Yep. I think the url needs to be changed to n2.nabble.com. Another thing
>
Rich told me he was having trouble sending this to the reflector but it is
such valuable advice and works so well I want to share it with the group.
I find even the DUPE warnings now come on the main computer speaker even
while sending PSK31 on the USB sound card. My IMD meter reads -29 to -33
so
I had the same thing happen several times. I'd call QRL? on what for me
was a totally open frequency and get a "RR" reply from someone way off
the side that I could only hear by virtue of their bad key clicks. One
guy was a full 500 Hz away and he still thought I'd be bothering him.
The nar
NZ0T wrote:
>
> When I click on the Nabble link it says it has been deleted. I finally
> got here by entering through Nabble.com. Anyone else having that problem?
>
Yep. I think the url needs to be changed to n2.nabble.com. Another thing
with the new version is that you have to log in every d
The side tone on my K2 (sn 537) has stopped working... not a peep.
Also, the spot function is not audible.I have checked the
"St L" (set at 50) and run it all the way up... no side tone. CW is
operating properly, internal keyer or externally. Does anyone recognize
this problem, or do I
Just had one of the audio blasts from the past so to speak,
Using the latest 3.63,
was changing modes from RTTY to CW and as soon as
I pressed the Mode switch and the K3 went into full audio
loud screech. Happy it was on speaker and not headphones
as it was eardrum busting. Hitting the mode swit
Received an e-mail from an EU MM group who tried the K3
for the first time this weekend along side the typical
mix of FT-1000MP, MK V, 2000 radios (many with Inrad
roofing filters and W8JI NB mods). Operators were mixed
when it came to receiving a single signal on a quiet band
- those who pr
Snooping on N1MM Logger and the K3, N1MM Logger does not
issue any command to directly turn off RIT when changing
bands (Ctrl-PgUp/Ctrl-PgDn). Using the Ctrl-pg commands
results in only one FA; or FB; command based on the last
used frequency on the next band.
It appears as if the K3 is not
When I click on the Nabble link it says it has been deleted. I finally got
here by entering through Nabble.com. Anyone else having that problem?
--
View this message in context:
http://n2.nabble.com/Nabble-can-t-get-there-from-the-Elecraft-page-tp4090805p4090805.html
Sent from the [K3] mailing
Even at 5w, I get the same complaints. My K3 will
let me slip in between big sigs and snipe away. They
can't take the heat :-)
KB and 73
Bob N6WG
- Original Message -
From: "Jim Brown"
To: "Elecraft Reflector"
Sent: Monday, November 30, 2009 1:49 PM
Subject: Re: [Elecraft] K3 in the C
> Is there a way to change the center freq of the denoiser ??
It has no center frequency. I reacts to the signals and noise it is
fed, and builds filters around the signals.
73,
Lyle KK7P
__
Elecraft mailing list
Home: http://mailman
On Mon, 30 Nov 2009 12:37:46 -0500, DOUGLAS ZWIEBEL wrote:
>What a great radio
Yes. Several times I got complaints from guys who came on my new run
frequency to complain when I landed too close to theirfrequency on
40M. Thanks to my K3, I didn't even know they were there, and
couldn't hear
Is there a way to change the center freq of the denoiser ??
I have my filters centered on 625 Hz and the denoiser appears to favor 700
to 710 Hz when viewing on Spectrogram.
Makes me have to run RIT to pick out the weak signals with the denoiser on.
Wondered if I could shift the center freq so
Hi Everybody. It's that time of year again, time for the TOP BAND SPRINT!
PLEASE NOTE: THIS CONTEST IS ON 3 DECEMBER 2009 UTC! THAT IS THE EVENING OF
WEDNESDAY 2 DECEMBER 2009 IN NORTH AMERICA.
3 December 2009, Z to 0600Z
The Top Band Sprint is a 6 hour CW and SSB contest
If you make a
This happens using N1MM logger V9.10.3 and K3 V3.6.3. I don't have any
serial snooper tools handy so I can't give the exact RS232 command sequence,
but it appears as if N1MM tries to turn off RIT/XIT on band change. To
reproduce:
Go to a band and turn RIT or XIT on. You'll see the annunciator on t
Heil ProSet 4 (DX element boom mike with dual headset) in excellent condition
with box and instruction sheet for sale, $100 shipped in the lower 48. Used
with my K-3, rear panel connections. Upgraded to Heil ProSet Plus. Contact
off line please. Cheers, Bob, k9...@comcast.net
from a perennial winner (or 2nd placer)...
http://lists.contesting.com/pipermail/3830/2009-November/186148.html
Says it all (only need to ready first two paragraphs, although he
again lauds the K3 further down).
What a great radio
Thanks Aptos (or wherever you are now).
de Doug KR2Q
__
Wow - We've had a tremendous response to our $29.95 handbook special.
As a heads up to our list subscribers, the special will end today at 12
noon PST (2000 Z)
Thanks for all the HB orders (and other orders too!)
73, Eric WA6HHQ
__
El
John -
The website says the approx. date for beginning to ship the Rev C board
was *May 1st, 2009.
73, Mike NF4L
*N1JM wrote:
> Anyone done this yet and what do you think?
>
> K3DSPUPGD Swap out upgrade of your Pre-Rev C DSP boards to a DSP board
> modified to Rev C. Ships beginning approx
~
N2CQ QRP CONTEST CALENDAR
December 2009
~
80 METER FOXHUNT (CW) *** QRP Contest ***
Each Tuesday Thru Mar 16, 2010
9 PM to 10:29 PM Eastern Time USA
Info: http://www.qrpfoxhunt
Thanks for the explanation Lyle...that's exactly right. Though I hesitated to
use
the term, it actually acts like an APF for CW...at least with my settings it
does.
Pitch is set at 550 Hz and using DSP 5-2 and the context filter on.
-
73,
Greg - AB7R
Whidbey Island WA
Anyone done this yet and what do you think?
K3DSPUPGDSwap out upgrade of your Pre-Rev C DSP boards to a DSP board
modified to Rev C. Ships beginning approximately 11/16/2009. Note: your old
K3 DSP board must be returned within 2-3 weeks of receipt of the upgrade to
avoid being charged for
Hi Ron,
Thanks very much for the response, just seemed a little odd seeing the holes
and then no sign of them in any of the online pic's and so on.
Mike
Ron D'Eau Claire wrote:
>
> Yep. A new errata was released last week covering that change, but I see
> it's not on the web site yet either.
>
36 matches
Mail list logo