Took the FW4.51 for a spin at PI4D in the CQ-M on 20m in SSB and CW
yesterday afternoon.
AGC THR on 12, SLP on 10.
Smooth operation, NB performed OK for the key clicks from a nearby freq.
(NB is DSP 2-3 and IF MED3)
Was it better than FW4.48? Not sure, but I like it that the threshold
can be
When I had two stations of the same strength on exact the same freq it
was still hard copy to pick only one out.
No hardware, no firmware, no nothing will ever solve this ... zero beat is
zero beat. ;-))
Vy 73, Olli - DH8BQA
http://www.dh8bqa.de/
For taking care of key clicks, NB LEVEL set to DSP t1-7 or t2-7 and IF
*OFF* is best. I got excellent results with the milder t1-7 in 4.51.
IF ON is traditional IF blanking with all the traditional artifacts.
Kept on the K3 because it's still best for some kinds of noise.
Traditional IF
Did the beta make it onto the download site? Has the reorg of the site
made it tougher to find?
73, Mike NF4L
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
I am now moving on to a version of Windows for P3 that can be operated
remotely over the internet.
Basically, the Windows4P3 client will be a version that uses a flash
component for display of the video in the user interface and comport tcp ip
redirection. Once again you need a frame grabber
Wayne mentioned on another list that the 4.51 beta may not be posted until
Monday. You can contact him directly if you would like to try it before
then.
73,
Bruce, N1RX
Did the beta make it onto the download site? Has the reorg of the site
made it tougher to find?
73, Mike NF4L
I believe the new K3 firmware will be uploaded today. If you're in a
hurry, email me and I'll send you the files.
73,
Wayne
N6KR
Mike wrote:
Did the beta make it onto the download site?
__
Elecraft mailing list
Home:
I just found this very nice Java application written by Ward, AE6TY. He
calls it SimSmith. You'll need Java loaded on your computer to run it.
http://www.ae6ty.com/Smith_Charts.html
I've had some email conversations with the author, and he's been quite
responsive to questions. There are two
I will be up this morning. Wayne took a little longer than expected to get it
to me.
Eric
www.elecraft.com
_..._
On May 12, 2012, at 10:25 PM, KQ8M k...@kq8m.com wrote:
Was just looking on the Elecraft site and still don't see the beta firmware
for download. I sure would like to give this
I have a foot peddle that I would like to use with the KX3. So does anyone know
a good source that can take the paddle and mic input to connect with the unit
73
Robert
a 'kosher' ham
Sent from my BlackBerry device
__
Elecraft mailing
Guys,
Smith charts are great once one has made it up the steep learning curve.
A alternative simple approach for common needs is the TLW program.
The TLW program which came with the ARRL Antenna Handbook on CD computes:
1) Load complex impedance given the shack end coax type and cable type
No rush. I just thought it was gonna be posted last nite.
73, Mike
On 5/13/12 10:49 AM, Wayne Burdick wrote:
I believe the new K3 firmware will be uploaded today. If you're in a
hurry, email me and I'll send you the files.
73,
Wayne
N6KR
Mike wrote:
Did the beta make it onto the
Will the KAT 500 be available at Dayton?
IF not to carry home, to order?
73
WB9JPH
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
Robert,
You can set up the ACC2 jack for use with a foot switch. Set MENU:ACC2
IO to LO=PTT, and connect your footswitch between ACC2 tip contact and
ground.
73,
Wayne
N6KR
On May 13, 2012, at 8:39 AM, va3...@gmail.com wrote:
I have a foot peddle that I would like to use with the KX3. So
On 5/13/2012 8:47 AM, Brian Alsop wrote:
Guys,
Smith charts are great once one has made it up the steep learning curve.
That's true of almost everything worth learning!
A alternative simple approach for common needs is the TLW program.
Yes, TLW is quite nice, quite accurate, but it's
Guy,
Well, both NBs create artifacts if pushed to hard.
I have not encountered any problems when using this config (DSP x-3 and
IF med-3). If I run any of the two NBs on x-7 it really becomes bad.
But your advice inspires me to experiment again.
73
Arie PA3A
Op 13-5-2012 15:16, Guy
Would you expect otherwise? There isn't anything the rig can do about
that ... that's what directional antennas are for.
Dave AB7E
On 5/13/2012 4:08 AM, Arie Kleingeld PA3A wrote:
When I had two stations of the same strength on exact the same freq it
was still hard copy to pick only one
K3 4.51 beta is now on the website. See:
http://www.elecraft.com/K3/k3_software.htm
73,
Eric
www.elecraft.com
_..._
On May 13, 2012, at 8:50 AM, Mike n...@nf4l.com wrote:
No rush. I just thought it was gonna be posted last nite.
73, Mike
On 5/13/12 10:49 AM, Wayne Burdick wrote:
I
K3 4.51 beta is now on the website. See:
http://www.elecraft.com/K3/k3_software.htm
73,
Eric
www.elecraft.com
_..._
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Bob, I can mail you a copy if you still need it.
72,
Clark WU4B
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Instructions-for-KD5NDB-solar-charger-tp7191119p705.html
Sent from the Elecraft mailing list archive at Nabble.com.
Joe said The only problem is that my poor antennas don't given me
enough strong signals
to really evaluate strong signal pile-up with off air signals at the
higher thresholds.
Turning on the pre-amp will increase the noise level, increase the
signal strength of those signals already there and
I found on what I was listening to, that turning off the IF blanking
cleaned it up and t1-7 or t2-7 was incredible for key clicks. The
other thing was that I always carefully minimize signal input on lower
bands with ATT/ /PRE/RFgain at only high enough to bring up band noise
to moderate in the
I just downloaded 4.51 and before I start messing around with changing
settings can anyone recommend a good starting point for general use?
73 Bill NZ0T
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Recommended-AGC-settings-for-4-51-tp713.html
Sent from the Elecraft
Thanks!
Mike
On 5/13/12 4:35 PM, Eric Swartz WA6HHQ - Elecraft wrote:
K3 4.51 beta is now on the website. See:
http://www.elecraft.com/K3/k3_software.htm
73,
Eric
www.elecraft.com
_..._
On May 13, 2012, at 8:50 AM, Miken...@nf4l.com wrote:
No rush. I just thought it was gonna be
When AGC THR and AGC SLP are changed in the CONFIG menu, are the settings
changed for the KRX3 also or are there other steps? Thanks. Roy W4WFB
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
For those who are lucky and are starting to pack their gear for dayton
Wondering what is on your shopping list to look for your new KX3 rig.
Batteries (on my list)
A loop for travel
A balun and good antenna wire
Maybe a amp (need one to get out and establish qSO from my dis-advantaged QTH)
What have people found to be good levels for the microphone and compression
on SSB?
Thanks!
--
73 de Ted Edwards, W3TB and GØPWW
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
ignore
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email
The noteworthy fact of today's net was the presence of five KX3s. No other
discussions. We had 26 participants over a 25 minute period. Have a great
week.
Here is the list of participants.
Station NameQTH Rig S/N
K1NWBrian RI K3 4974
N6JW
Hello,
I am ordering a K3 and was wondering if I need a KAT3, given that I will be
running an auto tuner at the anternna feed point? Will I bypass it most of
the time or is there some utility to having it?
Thanks
Tony (AF5EB, K5DEV after Tuesday)
K3 beta-test firmware revision 4.51 (with DSP rev. 2.76) is now
available. We'd like to thank the 100+ K3 owners who have put this
code through its paces over the past week.
The most important change is that the K3's AGC threshold (CONFIG:AGC
THR) can now be set much higher. In addition,
31 matches
Mail list logo