As one with acute P3 withdrawal using my KX3 instead of my
K3+P3, I'm looking forward to my PX3 actually shipping.
I did have a lot of fun with the KX3 while in New Hampshire.
With all its built in features (Dual watch, DVR etc.), I have a
bunch of money yet to spend on my K3.
I'm expecting
Hmm. I may be on to something here. Channel 00 is 146.520 simplex and
channels 1-7 are the NOAA weather channels (162.400-162.550 in 50kHz
increments). It appears if I put frequencies in there that are all within
the ham band it works.
So how do I program in the non-ham band frequencies via compu
That is a good thought. I switched to 38400 and no luck there either. Same
thing.
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Writing-memories-to-KX3-via-K3-Freq-Mem-Editor-tp7592537p7592539.html
Sent from the Elecraft mailing list archive at Nabble.com.
_
Hj
You might try going into the settings of the kx3 and set the baud rate to
38400. There is a lot of data being sent back and forth with the frequency
editor.
Tim
Original message
From: Steve KC8QVO via Elecraft
Date: 25/08/2014 21:42 (GMT-05:00)
To: elecraft@mailman
I am having some trouble getting the K3 Frequency Memory Editor to write, and
read, from the KX3. I installed a 2m module and so far that all seems to be
working fine (have the latest firmware) and now I am looking to program the
memories via the computer.
The utility connects to the rig on port
I have found that a serrated bread knife works well, when used with a sawing
motion, to cut through the little joiner pieces between the pick-n-pluck foam
cubes. Another trick for cutting open cell foam, especially when trying to cut
a non-linear profile, is to wet it, freeze it and cut it while
The photo with the OM crouching looks to me like he's scheming on how he might
enjoy some turtle soup.
73 de Dennis KD7CAC
Scottsdale, AZ
On Aug 25, 2014, at 5:45 PM, km...@km6cq.com [KX3] wrote:
>
> A couple of pictures of a very handsome ham can be seen here sporting
> Elecraft ware from L
Hi John,
We're just now cleaning up "the last bug," which was a bit challenging. Trust
me, we're just as anxious to ship as everyone else is to receive.
The manual was blessed today and should be posted soon.
Wayne
On Aug 25, 2014, at 6:05 PM, John_N1JM wrote:
> Anyone received notice of shi
Anyone received notice of shipment outside of Field Testers?
John N1JM
-
73, John N1JM
K3 #5986
P3 #1752
KPA500 #596
KX3 #926
XG3
XG1
--
View this message in context:
http://elecraft.365791.n2.nabble.com/PX3-Anyone-tp7592533.html
Sent from the Elecraft mailing list archive at Nabble.com.
I aw a hard and soft case earlier this afternoon at D&D Surplus, chicago
western suburb,
that might work. Best to appear in person and examine with your radio.
D & D Surplus, Batavia, IL
http://www.ddsurplus.com
w9gb
--
Sent from iPad Air
For the K Line these are quality, roomy and secure:
http://tinyurl.com/l3myusy
True, a little cumbersome.
73,
Mike ab3ap :-P
On Mon, Aug 25, 2014 at 7:57 PM, Phil Wheeler wrote:
> Very nice. But -- no wheels? :-)
>
> Phil W7OX
>
> On 8/25/14, 4:23 PM, Nick - VE3EY wrote:
>>
>> Here is som
Very nice. But -- no wheels? :-)
Phil W7OX
On 8/25/14, 4:23 PM, Nick - VE3EY wrote:
Hi George
Here is something which may answer your questions:
http://www.ae9k.com/home/elecraft-k-line/transport
73, Nick
ve3ey
On Mon, Aug 25, 2014 at 9:52 AM, George via Elecraft <
elecraft@mailman.qth.ne
Hi George
Here is something which may answer your questions:
http://www.ae9k.com/home/elecraft-k-line/transport
73, Nick
ve3ey
On Mon, Aug 25, 2014 at 9:52 AM, George via Elecraft <
elecraft@mailman.qth.net> wrote:
> I am interested in purchasing a packing case for my K-Line, or at least
>
Thanks to Harry and John for the excellent advice on the replacement fan.
The UTEC fans that came with my most recent KPA3 (September 2013) were very
annoying to me since I have a quiet radio room with no amplifier. The
problem was not so much one of volume as sound quality. The fan noise was
buz
Thank you for clarifying that Eric... Scared me!
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
for Dopplergram information see:
http://groups.yahoo.com/neo/groups/dopplergram/info
for MM-SSTV
When I used to travel a lot, I used to laugh at the beautiful shiny
black cases people carried with "Nikon" in gold letters plastered on the
side. They might as well just say "Steal me first". I always went for a
crappy looking canvas camera bag and built what I needed inside to
protect the ge
Note that I am referring to the on/off list discussion under this subject, not
the Data Mode Sideband discussion.
Eric
elecraft.com
On 8/25/2014 10:40 AM, Eric Swartz - WA6HHQ, Elecraft wrote:
Guys - Time to end this thread. Please post issues like this to the list owner
(me) rather than takin
Guys - Time to end this thread. Please post issues like this to the list owner
(me) rather than taking up ;list b/w for other readers.
73,
Eric
List Moderator
elecraft.com
On 8/25/2014 10:34 AM, Phil Wheeler wrote:
Nice to have that choice, not available without more effort with some lists.
Nice to have that choice, not available without
more effort with some lists.
Can't please everyone, it seems.
Phil W7OX
On 8/25/14, 10:22 AM, Lynn W. Taylor, WB6UUT wrote:
One small grumble with the list is that it is
configured so that "reply" goes back to the
originator, not to the list.
One small grumble with the list is that it is configured so that "reply"
goes back to the originator, not to the list.
If we aren't careful to "reply-all" or "reply-list," the conversation
moves off list by accident.
On 8/25/2014 6:16 AM, David Cole wrote:
I brought up OFF LIST, and I did so
The question of cases is a regular on the list. Although probably not what you
need, I stumbled across some cases in an unexpected place. RC enthusiasts
have the need to carry around their transmitters too, so cases show up in their
catalogs. These tend to be around 5 or 6 inches deep so pro
Speaking of cases, has anyone heard from Rose? I left a request for a
cover with her at Sea-Pac, and have called three times since, nothing at
all head back from her. Is she OK?
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://grou
I am interested in purchasing a packing case for my K-Line, or at least
the KPA500+KAT500 that can be checked in as airline baggage. I prefer a
Pelican or GemStar case.
If you have any suggestions, please let me know off net.
73, George, K5KG
George Wagner, K5KG
Sarasota, FL
941-400-19
I brought up OFF LIST, and I did so in order to be able to see what was
going on here... AFAIK nothing has been taken off list... I just want
to be sure it is not, sometimes interesting discussions just stop, and I
can only guess they have moved off list, hence the request. This is a
fascinating
Hi,
has anyone experience with the RigExpert TI-5 on k3 and can give me an
information.
vy 73 de DF9DD
Eckhard ("Ed")
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.n
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: htt
26 matches
Mail list logo
