I use an Icom SM-8 desktop and Yamaha CM500 headset with my K3. I'd like to
switch back and forth using some macro keys
- switch mics making sure only one mic is live at a time,
- shut speaker on/off
- set bias as needed
- adjust tx equalizer for the CM500 and then be able to put it back as it
I've had SteppIR antennas since 07. I have both a vertical and a beam. I run a
K3 with KPA500 in the shack. I have no relays. When changing frequencies within
a band the antennas are pretty fast. When changing bands, especially from say
80 to 10 or 40 -15 it can take several seconds for the
Yes, it can be done. The very first macro I ever did for my K3 was
switching between the front panel mic and speaker to the rear panel
connected CM500.
Unfortunately, I am not at home right now so I can't just go up and
show you the commands but the key to these macros working is that
the
Follow up on the comment I made below...
Actually, I remember that I made two macros. This is because I do CW a lot
and I wanted to switch my speaker and CM500 headphones separately from
switching the mics. So, a macro for switching speaker/headphones. And, a
macro for switching front and rear
OK Phil...thanks, if u remeber could u post the macros when you get home.
Thanks very much
Steve
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Macro-for-Speakers-Mic-tp7594764p7594768.html
Sent from the Elecraft mailing list archive at Nabble.com.
The weekly Elecraft SSB net is today at 1800Z on 14.3035 MHz. Stop by.
Phil, NS7P
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
Hello Elecrafters,
First of all let me say that I have RTFM, and RTFHF (read the freaking help
file) before posting this. I have read many digests both from here and on
the Elecraft KX3 Yahoo group. Greg (K2UM) has the same issue and so does
one other person (call, name uncertain). So, I am
Such small cards risk being lost in the QSL system if used as QSL cards.
73 Alan G0HIQ
From: elecraft-requ...@mailman.qth.net elecraft-requ...@mailman.qth.net
To: elecraft@mailman.qth.net
Sent: Sunday, 16 November 2014, 15:13
Subject: Elecraft Digest, Vol 127,
Hi John, 111614
I just received my K3 kit on Monday and am nearly finished with the
buildl; test is next.
I too have a SteppIR vertical and have been running it with my FT450D
and YT450D LDG autotuner.
They work well in combination - and as you say quick.
I will soon be at the point of
As I stated. I have read the manua (RTFM)l and tried the EEINT proceedure
stated there. It will NOT respond to a Parameter INIT. It still says MCU
LD. I have tried all documented solutions to get it back right. I realize
that I would have to recalibrate or load original config file after but I
This may sound stupid, but reboot the computer and try again. It might not be
the radio not understanding the data coming in the i/o port, but rather it may
be the computer (driver) got hosed and isn't sending proper data streams. Who
among us hasn't had an OS go stupid?
Then keep it simple,
It doesn't sound stupid at all, Rick. I just went through the same
exercise with a K3 I'm rebuilding. On loading it the first time, the
load failed mid-step. Trying to redo the firmware load, the utility
couldn't even find a K3 attached. But it was because of the state of
the serial port
Bill,
There are such diagrams at both the Elecraft website and the remoterig
website.
Pretty good detail.
unc Phil W0xi KS
Bill OMara via Elecraft mailto:elecraft@mailman.qth.net
Friday, November 14, 2014 2:37 PM
I'm interested in adding the K3/0 and remote rig capability to one of my
Please try the procedure described in KX3 Utility Help, Troubleshooting, MCU
Load failure. The page is titled MCU Boot Loader Troubleshooting. It
describes a procedure to recover from interrupted firmware loads. One of
several steps suggested include rebooting the computer to start the USB
I remember a problem I had a year or so ago where I was using
the K3 (Mac) utility to load all the K3 microprocessors'
firmware. I was failing on loading one of them and restarting it
did not cure the problem. I got around the problem by loading
just that specific piece of firmware. I vaguely
Randy,
MCU LD is a normal display by the KX3 when waiting for firmware to be
loaded.
It may be that the KX3 is just sitting there waiting for the computer to
feed it some data.
Because this all started during a firmware update that stopped midstream
for some unknown reason, I would suggest
OK, with the help of Rick Bates and Greg Buhyolf I have solved it.
Background (more of it): I use a PC hooked to the KX3 in the shack but I
am a Mac guy in the rest of my life. I had been trouble shooting this
issue with that PC. Since I have 3 USB brand new cables from Elecraft, I
decided to
Don,
You are correct. I tried it on a Mac with a brand new cable (I have many
extras as I have bought a lot of Elecraft toys). See my notes on the post
that just went to the reflector. Good ideas and I got to a solution just
before reading this. Thanks for the help.
On a side note, I wish I
My KX3 and KXPA100 lost connection when I was changing one of the DVR's in
the KX3. This also happened when I recently updated the Firmware and I had
to reset the settings in the KX3.
During the ARRL SS Contest, I went to change Memory 2 and found that the
KX3 lost the connection to the KXPA100.
Randy,
Re On a side note, I wish I could use a Mac in
the shack for everything natively (not in a VM
like Parallels or VMWare, etc)., you can. Just
use Bootcamp and install Windows as an alternate
boot option. I do that with my MBAir and my MBPro.
Both have solid-state drives, so re-boot is
Hello,
The first snow of the year was at least five weeks early. It got to
pipe freezing temperatures at least two nights this week. The oddest
sight of the week was seeing frozen, very wrinkled green leaves.
Normally things die off before it gets this cold but the transition from
50
Hi Greg. I think in Yahoo Digest 3503 you posed your question. Be sure to
follow up there with your results. I am posting this to the Elecraft
Reflector. I am certain that the other person on the Yahoo reflector having
this issue will be happy to know what you/we did.-not to mention
Elecraft(but
Hey Randy. Ready for a surprise?
The FTDI driver is actually built in to Yosemite. Mavericks, too. That
means you don’t need to download the driver from FTDI. Why is this important?
In Yosemite, drivers must be signed. The ones on the FTDI site are not.
I didn’t believe this when I first heard
Looks like I can TX but have no receive….no waterfall. Can someone give me
settings for iMic and Windows 7?
Steve, W1SFR
--
View this message in context:
http://elecraft.365791.n2.nabble.com/iMic-Fldigi-and-Windows-7-problems-tp7594787.html
Sent from the Elecraft mailing list archive at
Steve,
I don't think anyone can give you proper settings for your particular
computer, you will have to find them on your own, tuned to your
particular setup.
First, make sure the audio is getting into the iMic. Plug the audio
cable into something that you know produces audio, like an MP3
Used to get a repeat of my audio I recorded when I held down M1, through
M4. If I do it now, I see the word REPEAT, I hear one run of the
memory, and then nothing more... Any ideas? The little arrows feeding
each other disappears as well after one play.
--
Thanks and 73's,
For equipment, and
What do you have the repeat timing set to (MAIN:MSG RPT)? I bet if
you look at that, you'll find the problem. Best of luck.
73,
matt
W6NIA
On Sun, 16 Nov 2014 14:33:48 -0800, you wrote:
Used to get a repeat of my audio I recorded when I held down M1, through
M4. If I do it now, I see the
NAQCC Sprint Wednesday night!
The November sprint is this coming Wednesday evening local time (November 19th,
EST - 8:30-10:30PM, CST - 7:30-9:30PM, MST - 6:30-8:30PM, PST - 5:30-7:30PM),
which translates as Thurday November 20th, 0130 to 0330Z in all cases.
For all the official information,
Probably should mention what radio... K3
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
for Dopplergram information see:
http://groups.yahoo.com/neo/groups/dopplergram/info
for MM-SSTV see:
That was it... THANKS!!!
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
for MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
for Dopplergram information see:
http://groups.yahoo.com/neo/groups/dopplergram/info
for MM-SSTV see:
I had an earlier update crash (user error) and had similar MCU Load stuck. I
checked everything on radio side then decided to check computer side.
Somewhere in the process, it assigned a new internal PC port to the usb
adapter and would not reassign to the correct one. I shut down computer and
http://forum.incadigital.com/lnridygs/bchfcqzqfcqcjspsljerccgczdqvezd.wizqsqsohkwyltmcyaovkbgjtorhfyhmkgl
whayn...@verizon.net
__
Elecraft mailing list
Home:
32 matches
Mail list logo