When I bought my KPA500 kit very early in the production run, one of the three
TO-220 devices that get attached to the side panel had been soldered in to the
board cattywampus. The hole would not align with the side panel. Not wanting
to void the warranty, I called Elecraft support. They
If someone has an K160M for the K2 that is excess to their needs I’d be
interested in chatting about transferring ownership to me @
rodenkirch_...@msn.com
…71.5, 72 Jim Rodenkirch K9JWV
Sent from Windows Mail
__
Elecraft mailing
Neither is uncoiling the interstage insulated wire gimix coupling
capacitors and soldering the wires together.
73 de Brian/K3KO
On 2/6/2015 8:40 PM, WILLIS COOKE wrote:
Not a good idea for the screws sticking out of capacitors and
transformers.
Willis 'Cookie' Cooke,
TDXS Contest
CW Skimmer is a form of crutch. Us old timers still do it the old way, tune
around and listen closely, but keep an eye on the P3 display. Love that thing!
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Well, yes but the P3 can also be considered a crutch too. It all depends on
where the crutch/aid line is placed.
1st split capable RX-TX was Heath SB300-SB400 pair.
Confession time... Have but after initial fascination with it do not use CW
Skimmer but rely a lot on the P3. Is having the
Is there a command to reset the KAT3 (clear all tuner memories) without
doing an full initialization of the K3? I had some feedline problems
and have managed to store a bunch of bad tuner data points. Would like
to clear them out and do five or six benchmark positions on the bands
where the
Ihave a K3 (entire K-Line). Win 7 PC 3.5ghz processor 16gb ram; MicroHam DKII
Interface. Withthis setup I am able to successfully do PSK31 using HRD-DM780,
WSJT-X andJT65HF, WSPR and run N1MM+ successfully in SSB and CW - both RX TX.
Myproblem is with MMTTY both running byitself or as the
While in CONFIG:KAT3, tap the CLR switch. This is per-band.
Wayne
N6KR
On Feb 7, 2015, at 12:33 PM, Joe Subich, W4TV li...@subich.com wrote:
Is there a command to reset the KAT3 (clear all tuner memories) without
doing an full initialization of the K3? I had some feedline problems
and
Don - The Output of DK II is connected to the K3 ACC port using a DB15-EL-K3
cable supplied by microHam with the DK II.
73 Paulkc2nyu
--Paul,
Details on how you are connecting the DKII FSK output to the K3 please.
A quick perusal of the DKII information indicates
When the PX3 is off, I get output from rx/id. When I turn turn the PX3 on,
there is no output from the rx/id to computer. Please help.
John Lally
W7JJL
When the PX3 is off, I get output from rx/id. When I turn turn the PX3 on,
there is no output from the rx/id to computer. Please help.
John
The weekly SSB net meets on Sunday at 1800Z at 14.3035 MHz. I will be the NCS
from western OR.
There has been some traffic lately about difficulty hearing my signal and
getting into the net. Here are the particulars. The majority of the calls for
check-ins is by me. I am in the NW corner of
I'm working on my 62nd year as a ham and looking back at the history
I've experienced, I think I would credit the KWM-2 as the turning point
in the adoption of SSB over AM. Not that the all the masses could
afford it [in todays dollars, I think it cost around $10K], and there
had been the
Here is my input, for some reason I cannot use build in RTTY TX, going back to
129/016 bring back my TX RTTY. Same with any mode CW/PSK no TX with build-in
client...I am missing something or bug?
vy 73 de VE3GNO Daniel
From: Stephen Prior eastbrantw...@gmail.com
To: Elecraft Reflector
U ... I think Art Collins might have beat Heath to that with the
KWM-2 and external VFO, sometime around 1959, followed by the S-Line.
73,
Fred K6DGW
- Northern California Contest Club
- CU in the 50th Running of the Cal QSO Party 3-4 Oct 2015
- www.cqp.org
On 2/7/2015 11:55 AM, Bob
Paul,
Details on how you are connecting the DKII FSK output to the K3 please.
A quick perusal of the DKII information indicates to me that the FSK
output is from a computer COM port - which to me indicates that it is
RS-232 levels.
Those RS-232 levels must be converted to TTL levels by a one
Just noticed something odd with the latest P3 SVGA code (1.35/1.22).
Am split on 80m. Held the P3 button for Center and rotated the knob
so VFO A was closer to the left side of the screen then tapped the
button again. All was fine until I tapped Spot on the K3. Then the VFO
A marker on the
Hi Fred,
Was the 1st for me. Heath SB's were the poor mans Collins and Collins
had a lot of innovations.
73,
Bob
K2TK
On 2/7/2015 4:18 PM, Fred Jensen wrote:
U ... I think Art Collins might have beat Heath to that with the KWM-2 and
external VFO, sometime around 1959, followed
A KAT100-1 came with the used K2/10 I purchased a while back. I have decided
that a KAT2 would work better for my operating style so I'm putting the
KAT100 and KIO2 up for sale. Asking $200 shipped CONUS for the KAT100 by
itself or $250 shipped CONUS for a package deal with the KIO2. I'd take a
Thanks, Wayne. Looked for that in the Owners Manual but did not
find it.
73,
... Joe, W4TV
On 2015-02-07 3:52 PM, Wayne Burdick wrote:
While in CONFIG:KAT3, tap the CLR switch. This is per-band.
Wayne
N6KR
On Feb 7, 2015, at 12:33 PM, Joe Subich, W4TV li...@subich.com wrote:
Is
19 matches
Mail list logo