I wish Elecraft made a 1.5 kW version!
Vic 4X6GP
> On 11 Dec 2016, at 05:03, Tim Cook wrote:
>
> I've experimented with many auto tuners over the years many different
> companies and always had issues of one type or another that led to them not
> being a satisfactory solution.
Hank - I had that same signal at 28.004 and it was caused by my KAT500, as I
recall. Elecraft has a fix for that - simple mod to the KAT500, if I recall
correctly. Do you have a KAT500 and have you possibly removed power from it? If
so, that's probably where your signal has gone. Just a
Good Evening,
Please join us tomorrow on:
14050 kHz at 2300z Sunday (3 PM PST Sunday)
7045 kHz at 0200z Monday (6 PM PST Sunday)
73,
Kevin. KD5ONS
-
__
Elecraft mailing list
Home:
I've experimented with many auto tuners over the years many different
companies and always had issues of one type or another that led to them not
being a satisfactory solution. I live on a small lot and my compromise
antenna (for bands other that 10/15/20) is a 110 Ft long dipole fed with
about
Ok I give up - I always have a strong signal about 28004 on my K3 and it was
there this morning just like always and most all day - now its GONE and the rx
seems like its still working normally -107 dBm on the P3 for the 1 uv in . TX
ok too. Just no 28004 ??? What is the magic ?? Hank K7HP
I've not received any Elecraft Digests since 12/02/16. I can't find any
'trapped' messages. Is something amiss?
-
73 - Nolan Kienitz, KI5IO
--
View this message in context:
http://elecraft.365791.n2.nabble.com/No-Digests-tp7624583.html
Sent from the Elecraft mailing list archive at
Don't forget that you will have to send your call sign every 10 minutes,
and at the start and end of your QSO with your router.
On Sat, 2016-12-10 at 10:13 -0800, Lynn W. Taylor, WB6UUT wrote:
> Of course, you can't do anything "commercial" while running higher
> power, like streaming video.
Of course, you can't do anything "commercial" while running higher
power, like streaming video.
If you're using a remote that you pay for, using your QRO WiFi to access
it through the internet might be "commercial."
On 12/10/2016 10:07 AM, Bob Nielsen wrote:
Channels 1 through 8 are in a ham
Channels 1 through 8 are in a ham band so you could legally run much
higher power than non-licensed devices are allowed.
On 12/10/16 8:22 AM, Fred Jensen wrote:
I was able to make a very significant improvement in WiFi speed by
selecting a channel instead of letting the AT Uverse router do
Ed,
It may be worth remembering that CAT5e cable is rated to handle signals of
up to 100MHz. As you move from 10Mb to 100Mb to 1Gb ethernet and beyond,
the demands on the cable increase. For 1000Base-T (1Gb) CAT5 is not
recommended, you are better off with CAT5e. Beyond that, you need CAT6 or
Hello,
instead of waiting for the next summer to use the Kx2 I went another way. I
connected the Kx3 and the Kx2 with a Null-Modem cable (stereo cable with
switched data lines) and put in the Kx3 menue the AUTOINF to RigCtrl.
And it worked. The Kx2 follows the Kx3 with the frequency, mode and
Good afternoon, I just connected the K-pod to my K3 for the first time after
updating the firmware to the latest. I noticed that D4 is always on just
wondering if this is normal?
Mike
VE3WDM
__
Elecraft mailing list
Home:
David,
I use my KX3 to run WSPR, JT65, and JT9, using DATA-A. It does take a bit of
trial and error, but once you find the “golden settings” between the KX3 and
your sound card, things will be fine. I use a Tascam US-125M sound card; its
output controls are set to about the 1:00 mark. With
I was able to make a very significant improvement in WiFi speed by
selecting a channel instead of letting the AT Uverse router do it.
Apparently, everyone around us is in "let the router do it" mode, and
they are concentrated in the middle of the spectrum [3, 4, 5, 6, and 7].
Last time I
David,
The most likely problem is that you have too much output from the sound
card.
Try putting a 10 dB attenuator in the cable between the soundcard and
the KX3 MIC input - 100k in series with 10k from the KX3 end of that
resistor to the shield should do nicely.
The KX3 has an audio
Hi,
I've just re-acquired a KX3, and have been trying it on JT65.
As per recommendations I have been trying to use Data A mode, but trying to
adjust the drive level is a nightmare, and getting the required 4-5 bars of ALC
has been near impossible. If I switch to USB mode, I can set the drive
16 matches
Mail list logo