Hi Eric,
Thanks for the response.
As I mentioned in my positing, I'm on "the line" with the support people
and have an active thread.
They want my rig for 2-3 weeks, which is not compatible with my travel
plans, so I'm looking for other ways to fix the problem.
-christopher.
73 de AI6KG
On
Better yet, email supp...@elecraft.com
Our tech support team is here ti help!
73,
Eric
elecraft.com
_..._
> On Aug 2, 2017, at 7:06 PM, Wes Stewart wrote:
>
> You're an hour away from Elecraft. Your options:
>
> 1) Drive it down and tell them you'll wait.
>
> 2)
Our pleasure, Mike.
I’d like to thank our KX2 project manager, Matt, for his hard work in updating
the full package.
I’d also like to thank the many customers who pestered us into submission :)
73,
Wayne
N6KR
> On Aug 2, 2017, at 7:45 PM, Mike Morrow k...@arrl.net wrote:
>
> I notice that
the next step is to offer it as a kit.
On Wed, Aug 2, 2017 at 7:40 PM, Mike Morrow wrote:
> I notice that today Elecraft has published a 17-page set of schematics for
> the KX2 and its accessories. The URL below has been added to the "Manuals
> and Downloads" page at
I notice that today Elecraft has published a 17-page set of schematics for the
KX2 and its accessories. The URL below has been added to the "Manuals and
Downloads" page at Elecraft.com:
http://www.elecraft.com/manual/E740324%20KX2%20Schematic%20Files%20RevA.pdf
This package, and the device
You're an hour away from Elecraft. Your options:
1) Drive it down and tell them you'll wait.
2) Drive it down and ask for a loaner.
3) Come by my house in Tucson and I'll loan you one.
Wes N7WS
8/2/2017 6:06 PM, Christopher Hoover wrote:
I went to bed last night leaving the radio on to
I went to bed last night leaving the radio on to decode 6m meteor scatter.
This morning I found the LCD blank.
The backlight is on, but there are no segments lit.
Power cycle does not change anything.
All the settings seem reasonable:
MN002;
MP;MP007;
MN003;
MP;MP005;
MN004;
MP;MP003;
On 8/2/2017 11:41 AM, EUGENE GABRY wrote:
The bottom line is, copy what is sent/you hear.
Of course. But this discussion is, I believe, about finding grids for
QSOs when the grid was not exchanged on the air. I ran into that with
nearly all QSOs I submitted for the CQ Field award, because I
I know of one ham who has a tower in one grid square and another tower in a
different grid square, both in his back yard.
Be careful out there!
73 Jim Allen W6OGC
Sent from my iPad
__
Elecraft mailing list
Home:
Y-Box has been sold
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support
Hi all,
Our K3S vs. IC7300 comparison chart proved so popular that we’ve also updated
our similar chart for the KX3. It will be posted on our website soon.
Meanwhile, I’ll be happy to send it on request. Please email me directly.
73,
Wayne
N6KR
Hi All, just a thought,
I saw a KPA1500 in FHN the other week but forgot to look behind the psu.
What would have been nice is a 12v output to power the K3. This would
make it all integrated.
I feel sure the extra space required would be minimal and rear panel
space for connectors ...well there
fw 5.6/2.88
Following manual instructions allows one to put another band in the
SUBRX OK. Tuning works fine.
However, changing VFO A frequency to another band by front panel or CAT
entry also puts that VFO freq in VFO B. In otherwords, VFO B band/freq
is not sticky.
VFO linking is off.
Everything is going very well, Jim. There will be an announcement soon.
Wayne
N6KR
http://www.elecraft.com
> On Aug 2, 2017, at 11:52 AM, Jim Miller wrote:
>
> It's been since late May that we've heard anything on KPA1500 status.
>
> Having sold all my "boots" in
The KAT500 auto-tuner has been sold.
> Begin forwarded message:
>
> From: Phil Hystad
> Subject: [Elecraft] OT -- For sale, KAT500 Auto Tuner
> Date: August 1, 2017 at 9:57:12 PM PDT
> To: Elecraft Reflector Reflector
>
> Selling KAT500 Auto-tuner,
I'm not sure how the RBN measures speed, but it always seems to agree with my
computer (N1MM), with and without the Winkeyer. Anyhow, another KX2 owner has
measured the dot period, and confirmed that it runs about 2-3 wpm fast.
Scott K9MA
--
Scott Ellington
--- via iPad
> On Aug
If anyone finds that K2 document useful, you may want to send an email
to Derek Brown WF4I (dereksbr...@att.net) thanking him for his work. He
put a substantial amount of effort into creating it.
73,
Don W3FPR
-
Mike,
Not a K2 Nifty
Mike,
Not a K2 Nifty Guide, but there is a booklet which has the K2 button
functions and menu items on my webpage www.w3fpr.com. It was prepared
by a friend of mine when he was learning how to use the K2 and has
released it for use by all. Scroll down near the bottom of the opening
page.
I am with Wes on this, who states more effectively than I did what I meant in
my original post – that in my experience there is gold all over the place, and
the titles of many posts are neither highly specific nor highly sensitive.
Sometimes it’s like copying a CW signal that’s well below the
Have for sale a Y-BOX that I am not going to use. $125 shipped CONUS. Please
respond off list for payment info.
de Ben W4SC.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Hi Gang,
Anyone have a K2 Nifty Guide they'd be willing to sell?
Thanks!
-- Mike Flowers, K6MKF, NCDXC - "It's about DX!"
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
My Mini-Mods have been sold.
W1zk
--
Webmaster USS PUEBLO Veterans Association
Life Member American Ex-Prisoners of War
Life Member Disabled American Veterans
__
Elecraft mailing list
Home:
Hi Scott,
Measuring the KX2 DOT period with KYR-SP set to 32 WPM is 34.6 ms. Which
equates to 34.7 WPM.
KX2 #80
John KN5L
On 08/02/2017 12:49 PM, K9MA wrote:
> According to the RBN reports, my KX2 seems to send about 2 wpm faster
> than the set speed, like 34 vs 32. Has anyone else noticed
(new kx3 owner, otherwise unaffiliated)
I suspect they aren't allowed to say anything until the FCC approval # is
issued, otherwise perhaps they could get busted for soliciting for sale of
an unapproved RF device.
On Wed, Aug 2, 2017 at 11:52 AM, Jim Miller wrote:
> It's
It's been since late May that we've heard anything on KPA1500 status.
Having sold all my "boots" in anticipation, I'm barefoot going into the
contest season.
Any news?
jim ab3cv (credit card on the ramp, one turnin', one burnin')
__
A third excellent tool for determining grid square is the tool at
http://www.levinecentral.com/ham/grid_square.php
73,
... Joe, W4TV
On 8/2/2017 1:49 PM, Jim Brown wrote:
On 8/2/2017 10:21 AM, Fred Jensen wrote:
I think you have to get the grid from the station during the QSO, if
grid
>
> On August 2, 2017 at 12:49 PM Jim Brown
> wrote:
>
> On 8/2/2017 10:21 AM, Fred Jensen wrote:
>
> > >
> > I think you have to get the grid from the station during the QSO, if
> > grid matters.
> >
> > >
> The bottom
For Sale: Elecraft Mini-Module kits.N-GEN wide band noise generator
100Khz-500Mhz. XG1 1uV/50uV 7Mhz test oscillator. XG2 3 band
1uV/50uV 20M/40M/80M test oscillator. Includes an approximately 3 ft
RG-58 cable with RCA connectors plus UHF and BNC adapters. Perfect
working order, full
How does the RBN measure speed?? One character at a time? Over a period of
time? Regardless of the speed set in the keyer dial, character spacing and/or
word spacing might matter.
> On Aug 2, 2017, at 1:49 PM, K9MA wrote:
>
> According to the RBN reports, my KX2 seems
I've never noticed it. I can't go that fast.
Dave KD9VT
On Wed, Aug 2, 2017 at 12:49 PM, K9MA wrote:
> According to the RBN reports, my KX2 seems to send about 2 wpm faster than
> the set speed, like 34 vs 32. Has anyone else noticed this?
>
> Scott K9MA
>
> --
> Scott
On 8/2/2017 10:21 AM, Fred Jensen wrote:
I think you have to get the grid from the station during the QSO, if
grid matters.
Or from the QSL or LOTW. Grids mostly matter on VHF, and nearly
universal practice is for the grid to be part of the first "over" in
every QSO, regardless of mode. All
According to the RBN reports, my KX2 seems to send about 2 wpm faster
than the set speed, like 34 vs 32. Has anyone else noticed this?
Scott K9MA
--
Scott K9MA
k...@sdellington.us
__
Elecraft mailing list
Home:
Multiple ramifications here. Unless the ham has specifically entered
his station coordinates, the coordinates in QRZ, and thus the grid, will
usually default to the Post Office that services his ZIP code. It is
"usually" because even that doesn't always happen in very small
communities. And
The other issue that I run into a LOT is with folks who are either on vacation,
traveling, or have moved and simply have not updated their records. They send
one grid square on WSJT-X and yet QRZ has something completely different. My
grid is CM98, but operating on vacation in April as
Many of us use QRZ.com listings to determine the grid
square for a given station. Use caution ... QRZ apparently
uses the address location to determine the grid square that
the website shows..
There are numerous situations where the address is a P.O.
box that is -not- in the station's actual
Guys,
The solar eclipse is coming and one group is asking for people to record
8 hours of doppler shifts and amplitudes on as many WWV and CHU freqs as
possible.
I have a K3 with subrx. I'm having trouble different frequencies in the
main and subrx.
Here's what I want to do:
1) Put
Hi,
sorry to bother you over here.
I would like to just ask if there is chance somehow to set the notch filter
permanently on K3?
I am a bit weary to adjusting the NTCH after each tuning ON the radio...
Many thanks for help.
73 - Petr, OK1RP
-
http://ok1rp.blogspot.com
--
View this
37 matches
Mail list logo