From the 3rd port of the T I use a BNC male to BNC male direct to the
input on the SDR. Thus my "cable length" on the input of the SDR is
about 1".
Good point however.
73
Bob, K4TAX
On 12/6/2021 3:01 PM, elecraft-requ...@mailman.qth.net wrote:
Message: 8
Date: Sun, 5 Dec 2021 13:02:36 -080
Wow. I'd like to have an XV222, but that one looks like it needs
some TLC. That's about the most atrocious soldering job I've seen in
a while.
It's a miracle it works at all.
I have both the 2M and 70cm versions, so an XV222 would fill out the
triumphirate.
73,
-- Dave, N8SBE
Quotin
Greetings,
I have an XV222 for sale.
Set up to work with 1mW drive from a K3. Testing on the bench, it meets
factory specs, but in operation it's a little flaky. It works OK most of
the time on CW and SSB, but is not really stable enough for digi mode
operation. Whoever built it had no b
On 12/6/2021 10:27 AM, Bob KD7YZ wrote:
Hello Dave Erickson:
Sunday, December 5, 2021, 5:12:22 PM, you chiseled out:
Hey guys, replying to my own comments here: the SDRPlay can connect directly to the
"IF" output not the RF as I misstated in the original post.
Hi Dave, tnx reply.
Well, hm
The K3 is a QRP rig with a KPA3 100W option. Without the KPA3, the K3's
low-power amplifier becomes its final amplifier instead of being the KPA3's
driver.
I have the board you describe in front of me. Mine is 41 mm by 9mm. The board
is intended to pass the output of the low-power amplifier
5 matches
Mail list logo
