I'm sure there are many on this list looking for the same board...
I've just acquired a second K3 and it's got the original boards too. Have
been snooping around looking for the same board, but alas no luck.
73
Matthew
VK5ZM
On Mon, 4 Jul 2022 at 00:56, bob fctaz.com wrote:
> Hello K3 user
I really enjoy my K2/100. I use it weekly for CWT’s, MST’s & SST’s with N1MM+.
I usually operate the tests barefoot but sometimes run a KPA1500 with the K2.
The shift/width controls are not as versatile as my K3S but I don’t need em for
the 1 hr CW tests. Computer control of the K2 and K3s
Thanks, Andrew.
If you've figured out how to remove the KPA100, I'm still looking. If you've
got the KAT100 I'll take that, too.
73
Bill
KN6UDK
> On Jul 9, 2022, at 10:26 AM, Andrew Moore wrote:
>
> Hi Bill & list -
>
> I bought a K2 from someone on the list and it came with the KPA100,
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
> the K3 is a vastly superior radio
Brian - if you had nickel for every time someone declared one rig is better
than another without knowing your needs or offering reasons to back it up,
you could buy both ;)
As many will say, don't over think sensitivity. You'll probably find many
other
Brian...
The K2 is somewhat of a spiritual event. There are many - me included -
who are very attached to their K2's, not because the specs are amazing -
many modern radios perform better - but because we built them, got
familiar with them, used them in memorable situations, and became fondly
Complex, multivariate problem Brian, sensitivity being only one
variable, and some of the variables are very subjective. I love my K2
and use it QRP, usually in the summer, for field activities. It is not
a great multi-station FD rig and has nowhere near the capabilities of a
K3 in such an
On 7/14/2022 1:44 PM, brianpepperdine brianpepperdine wrote:
I realize there are a myriad of differences between the K2 and K3, but
today I read the specs in each owners manual and was somewhat surprised
that the each is listed at about -135 dBm sensitivity (pre-amp on for
K2...pre-amp off at
Brian,
depends on your use case - sensitivity is not the only spec you need (in
fact it could be an overkill to have -130 dBm). K3 with a better
synthesizer(you can upgrade K3 to have it) performs way better
with reciprocal mixing dynamic range - something which people want for
contesting. It is
I realize there are a myriad of differences between the K2 and
K3, but today I read the specs in each owners manual and was somewhat
surprised that the each is listed at about -135 dBm sensitivity (pre-amp
on for K2...pre-amp off at - 130 dBm for K2).
I was curious since I was
10 matches
Mail list logo