Will the KX3 be capable of synchronous detection? Also, I was wondering if
you are going to be able to monitor voltage and current like you can on the
K3. If so, then would it be possible for the current consumption to be
monitored as well as voltage maximums/minimums? There is a product called
KPA500? ..very interesting.
Bob W9RFS
--
View this message in context:
http://n2.nabble.com/Fwd-Re-KPA500-IO-Board-Schematic-tp4062429p4062924.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing
of my dsp board swap with the loading of the latest beta firmware, I
was never really certain what led to the improvement. Is it the hardware or
the firmtware, or are both required for older K3's?
Bob W9RFS
The audio passband shift changes in the latest K3 beta firmware release
served
Wayne,
I would like to give it a try.
Thanks,
Bob W9RFS
wayne burdick wrote:
The next K3 beta firmware release will include dramatically better
bass response in receive mode (50-200 Hz). The result is fuller,
richer audio, which many of you have asked for.
Lyle (KK7P) and I
Being able to use the P3 as a station monitor durring TX would be great!
Could it be possible to see the RF envelope; modulation; RF
compression/clipping?
Could be a very nice tool.
Bob W9RFS
--
View this message in context:
http://n2.nabble.com/K3-P3-thought-tp3468007p3470510.html
Sent from
I installed MCU rev 02.80; FPF 00.02; DSP 1 2, 01.99; DVR ver 01.03.
During the pause of a repeating message, the DVR does not drop out of repeat
when I hit my PTT foot-pedal to transmit.
I have a 10sec pause selected in repeat mode. If I transmit and then listen
during the pause, the message
Activating PTT durring the pause between repeating DVR playback, does not
stop playback. It would be nice to stop repeat playback with PTT, when a
station returns your call between transmissions.
Bob W9RFS
wayne burdick wrote:
Actually, Lyle just looked into using VOX to stop the DVR, and he
I was wondering how to vary the time/pause between transmissions
of a repeating DVR message? It repeats about every 5 or 6 seconds
right now. Thanks,
Bob W9RFS
--
View this message in context:
http://n2.nabble.com/K3-DVR-repeat-tp2200116p2200116.html
Sent from the Elecraft mailing list
I just read how to do in the new DVR manual,
Thanks,
Bob W9RFS
Bob W9RFS wrote:
I was wondering how to vary the time/pause between transmissions
of a repeating DVR message? It repeats about every 5 or 6 seconds
right now. Thanks,
Bob W9RFS
--
View this message in context:
http
Starting at the finger dimple, The paint is chiping off the face of the main
tuning knob. Anyone else have this problem?
Bob W9RFS
--
View this message in context:
http://n2.nabble.com/K3-tuning-knob-paint-tp1712006p1712006.html
Sent from the Elecraft mailing list archive at Nabble.com
.
perfect for some low angle radiation near the sea shore!
Bob W9RFS
Allen J. Gawne wrote:
Hi
I'm setting up a station after many years absence from Amateur Radio and
hope you may be able to help.
I would appreciate other users experiences of antennas they have connected
to the K3 ATU and any
I ordered my K3/100 kit on Dec. 24TH, 2007.
I received the FM, AM and 2.8 filters.
Backordered items: DVR, 2ND RX, 400Hz 8 pole.
995 is a real cool number and I'm a happy guy!
Bob W9RFS
--
View this message in context:
http://www.nabble.com/K3-SN-000995-delivered-today-tp17633730p17633730.html
the specs? Thanks,
Brett Howard wrote:
2.5 Watts into 4 ohms if you're willing to put up with 10% THD. Figure
2 watts into 4 ohms.
On Fri, 2008-03-14 at 20:41 -0700, Bob W9RFS wrote:
Does anyone know how many watts the audio amp is that feeds the speaker
output connector?
Thanks
Does anyone know how many watts the audio amp is that feeds the speaker
output connector?
Thanks!
--
View this message in context:
http://www.nabble.com/K3-AF-PA-tp16062844p16062844.html
Sent from the Elecraft mailing list archive at Nabble.com.
___
Would it be possible for the K3 to provide 48volt Phantom power for
profesional condensor microphones?
Thanks!
--
View this message in context:
http://www.nabble.com/K3-phantom-power-tp14620406p14620406.html
Sent from the Elecraft mailing list archive at Nabble.com.
15 matches
Mail list logo