I've read the errata but missed this information ðŸ˜
Once done, I need to realigne the receiver and the transmitter on all the bands
I think ?
Once more Don, thanks a lot !
De : Don Wilhelm
Envoyé : dimanche 7 juin 2020 20:05
À : Christophe GIBERT ; Ele
: Don Wilhelm
Envoyé : dimanche 7 juin 2020 19:12
À : Christophe GIBERT ; Elecraft Support
; elecraft@mailman.qth.net
Objet : Re: [Elecraft] K2 showing Lo P on 10 meters, and no transmit power.
Chris,
Yes, the bandpass filter seems to be the problem.
Do you have the correct inductors at L12 and
2 Vrms
U9 pin 6 : 0.293 Vrms
W6 : 0 or near 0 V
So in S1 anode : 0 V or near... It seems to incriminate the bandpass filter or
am I wrong ?
Please tell ...
Thanks a lot.
--
Chris
De : Don Wilhelm
Envoyé : jeudi 4 juin 2020 17:34
À : Christophe GIBERT ; E
Hi folks, I'm done in the building of my #7855 K2 and his KAT2.
I've got a problem on 10 meters.
For example I put the VFO on 28 360 Khz and I press down TUNE, to tune.
The screen shows a "Low P" message. When I try to transmit on this band, where
is no power at all, the S Meter not move at all
Hi all, as the KAT100 is retired, i’m looking for a kit of a KAT100-1 or
KAT100-2, or also a buildt one in good condition. (Delivery in France)
Thanks.
—
Chris
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elec
in to connect to the holes. He mounted
> it on the bottom of the board.
>
> 73,
> Don W3FPR
>
>> On 5/6/2020 4:44 PM, Christophe GIBERT wrote:
>> Hi! First of all, sorry for my poor english, i’m french ;-)
>> I’m building my k2 number 7855.
>> In the first step
Hi! First of all, sorry for my poor english, i’m french ;-)
I’m building my k2 number 7855.
In the first step of the 4mhz oscillator calibration, i get a frequency of
00500.00 instead of 12090.00
When i press BAND + : 00475.00 and BAND - : 12085.43 (stable).
I’ve tested probe on TP2, I’d 491
7 matches
Mail list logo