I am looking for the simplest method to fine tune the frequency readout on my
K2 using WWV. It reads about 60 hz high right now.
Thanks for your help!
Dean
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
I just built and installed the KSB2 for my KS SN5319. I used the capacitors
for 2.6 MHZ bandwidth and the transmit audio sounds excellent and full
bodied as tested on my Mark V. I did notice on the receive audio that there
is some roll off below 450 HTZ regardless of where the filter/BFO is
I am looking at upgrading my K2 with the KSB2. The manual states 10-15 mA of
current drain and I would like to know if this turns off while in CW mode, or
if there is a way to turn it off. I will be using my K2 for wilderness hikes
and I will need to turn off non-essential drain.
Thanks!
Dean
Thanks to everybody for your help. I changed the value of R98 from 230 to
560 and now the power output is stable and tracks the called for power
much more consistently too.
5319 is now working perfectly. What a radio!
Dean
KG7MZ
___
Elecraft
I just finished SN 5319 a few days ago and all is working perfectly except that
the output power fluctuates. The radio is stock with no options. It will not
fluctuate while the radio is transmitting a solid carrier, but as soon as you
unkey and start sending a carrier again, the power will drop
5 matches
Mail list logo