I have a RS232 cable which I made for another project. I plan to change
one of the DB9 connectors to a male version. In essence it will end up
being the cable that is shown in Figure 41 of the K2/100 manual, page 55.
My computer has a RS232 port and the female end of this cable will go
I have a K2 with the 100W, K2/100, mounted in the top. I want to obtain
a RS232 cable with male DB9 on one end and female on the other.
In order to make the connection in the back or the K2 it seems the male
plug needs to be modified. That is a slot cut so that it fits the
key/tab that is
I should have first stated that I do not have any K2 or any amplifiers
or tuners. Just asking questions in anticipation of getting a K2.
Reading manuals and seeing photos of k2s is not as good as seeing the
actual unit.
I am aware that the top of the KPA-100 is a black fined heat sink. I
For a portable operation:
Can anyone tell me if I have a K2 with the KPA-100 and the KAT2 low
power auto tuner installed can it be operated at say 35 watts. I will
have a battery large enough to supply power. (Will not use this setup at
100W). Will the tuner work OK?
I've been hunting
Looking for a K2 built or kit. Can be newer s/n & qrp.
Let me know what you have.
Thanks,
Gene, W2BXR
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
WTB K2 kit. oops -- my email is ea...@comcast.net
Gene, W2BXR
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list
I am looking for a K2 kit that someone may have that they no longer want
to build. Send me an email and let me know what you have.
Thanks, Gene W2BXR
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Problem has been solved. K3 is working OK. The settings for the WJST-X
F8 mode software were not correct. Also the MIC output from my computer
was not working properly. Thank you all who responded.
73, Gene W2BXR
__
Elecraft
K3 -- While in Data-A mode, I press the XMIT button and the unit does
not transmit fully. It sort of goes into oscillation is the best I can
describe it. I am transmitting into a dummy load at about 20 watts.
I first noticed this while using WJST F8. At that time I thought this
was feed
Recently rearranged the operating position in my shack. Now when
operating JT65 or F8 I can activate transmit button but it "motorboats"
when I try to turn it off. I need to hit the XMIT button to turn it
off. I must have a cable in the wrong position. Can anyone point me in
the right
I believe I solved the problem. It seems in the P3 menu I somehow set
the "Ref Cal" value to 700. Perhaps I thought it should be the same as
the pitch??? (don't know what the hec I was thinking).
In any event I changed this to zero and I am now able to tune to a
signal with the K3 and the
Just discovered when trying to copy a strong CW signal the frequency
seems to offset. I can see the signal on my P3 at say 7024.000 but I
hear the station the strongest at 7025.000. This occurs with either my
1.0khz or 400hz filter.
Is there some frequency offset that I may set in error?
Well as you all may have suspected it is operator error after all. It
seems I had plugged the speakers into the phone jack. I looked at the
back of the K3 I don't know how many times and still. Oh well. 2nd
mistake of my life
Thanks to Brian, K0DTJ and Vic, VE3YT and others that may
Several days ago I posted a question regarding setting the time and
about speakers not turning off.
I got the time straightened out. When plugging in the headphones the
speaker that turns off is the one in the K3 _not _the external Bose
speakers I have hooked up.
Thanks to all that
Just posted this question. Did not have "K3" on the subject line.
I have been off the air for about 10 months and just now trying to set
up my K3. I have 2 Bose speakers wired to the K3, (stereo plug in the
back of the K3). When I plug headphones into the front panel shouldn't
the
I have been off the air for about 10 months and just now trying to set
up my K3. I have 2 Bose speakers wired to the K3, (stereo plug in the
back of the K3). When I plug headphones into the front panel shouldn't
the speakers turn off? They stay on.
In the config menu I have the SPKR+PH
16 matches
Mail list logo