Re: [Elecraft] Bluetooth to RS232

serial port on my laptop, I can now use my SCS PTC-IIe with my K2 and have the control feature by using bluetooth. Less cable is something quite useful. If you try it with this interface, let us know !!! :-) 73 J-F VA2SS Mike Scott-7 wrote: I wonder how I would mount an antenna on a K3

Re: [Elecraft] Elecraft K2 Internal Bluetooth Interface Integration Addon

on this beyond just the flickr pictures if you have the time? - === de J-F VA2SS -- View this message in context: http://www.nabble.com/Elecraft-K2-Internal-Bluetooth-Interface-Integration-Addon-tp17093696p17104078.html Sent from the Elecraft mailing list archive at Nabble.com

Re: [Elecraft] Elecraft K2 Internal Bluetooth Interface Integration Addon

J-F VA2SS -- View this message in context: http://www.nabble.com/Elecraft-K2-Internal-Bluetooth-Interface-Integration-Addon-tp17093696p17112096.html Sent from the Elecraft mailing list archive at Nabble.com. ___ Elecraft mailing list Post to: Elecraft

[Elecraft] Elecraft K2 Internal Bluetooth Interface Integration Addon

cable for the KPA100 and the bluetooth for the remote control at the same time. Another clumsy project from me Any comment are welcome. See you at Dayton 73 de J-F VA2SS -- View this message in context: http://www.nabble.com/Elecraft-K2-Internal-Bluetooth-Interface-Integration-Addon

Re: [Elecraft] Elecraft K2 Internal Bluetooth Interface Integration Addon

I forgot to mention that my K2 have now a MAC address :-) 73 J-F VA2SS wrote: Hi, I finally did another project on my K2 #4130. I was tired of using a serial cable for just basic control of my K2 with Hamradio Deluxe. I integrated an internal bluetooth interface bound

[Elecraft] KDSP2 center frequency increment value

value could be more precise when aligning everything. And when using a 100 Hz DSP filter width... 50 Hz increment is too high. The DSP filters are very effective compared to the crystal filters when used on narrow width like 100 Hz 73 de J-F VA2SS -- View this message in context: http

[Elecraft] K2 Mic Gain parameter SSB vs Digital mode

Hi, Is there a way to modify the K2 that have 2 different parameters for mic gain when using SSB or digital mode (RTTY ON) !?!!? I know that we are able to set different parameter for compression if used in SSB or RTTY mode... but for mic gain it is not possible. It would be more useful to

Re: [Elecraft] K2/KPA100 40M SSB ALC Problem?

will be at Dayton this year, just in case... my first time. :-) 73 J-F VA2SS (formerly VA2VYZ) Don Wilhelm wrote: The conditions you describe are almost identical to the behavior experienced when the KI6WX SSB Increased RF Gain mod is added to the KSB2 board, *and* the KPA100 is also in-line

Re: [Elecraft] K2/KPA100 40M SSB ALC Problem?

will be at Dayton this year, just in case... my first time. :-) 73 J-F VA2SS (formerly VA2VYZ) The conditions you describe are almost identical to the behavior experienced when the KI6WX SSB Increased RF Gain mod is added to the KSB2 board, *and* the KPA100 is also in-line. The result

[Elecraft] K2 data port integration rev. 2.0

... a must for all, espacially for digital mode !!! Schematic can be found at : http://www.flickr.com/photos/va2ss/ Any question... don't hesitate !! :-) 73 de J-F VA2SS (formerly VA2VYZ) -- View this message in context: http://www.nabble.com/K2-data-port-integration-rev.-2.0-tp17041533p17041533