Re: [Elecraft] WSJTX ON A MAC

R Gilley I gave used Mac for years and there are lots of folks that do.Go with Howard’s advice first, if you have not already done so. Odds are the settings in WSJT-X are not quite right. Check the Rig settings in WSJTX. You might have a check mark set incorrectly, something like DTR

Re: [Elecraft] KAT500: Not remembering antenna configuration

. 73 Hoop K9QJS On Apr 12, 2023, at 2:47 PM, JK Hooper wrote: Any insights on troubleshooting approaches for my KAT500 S/N 015XX which is not remembering the antenna configurations I enter. K4D - KPA500 - KAT500. KAT500 gets its power from the K4D auxiliary DC port. KAT500 is running

[Elecraft] KAT500: Not remembering antenna configuration

Any insights on troubleshooting approaches for my KAT500 S/N 015XX which is not remembering the antenna configurations I enter. K4D - KPA500 - KAT500. KAT500 gets its power from the K4D auxiliary DC port. KAT500 is running latest firmware version 02.05. Mac Utility is version

Re: [Elecraft] KAT500 - can't change antennas on 6 meters

conclusion: maybe not the KAT500 settings. Hoop On Mar 21, 2023, at 12:04 PM, Dennis Moore wrote: With power only, no control cables plugged in so it's essentially isolated from anything external, are you able to switch between modes and antennas? Dennis NJ6G On 3/21/2023 09:43, JK

[Elecraft] KAT500 - can't change antennas on 6 meters

Hi all, Despite my making what-I-think are appropriate changes in the KAT500 utility (MacOS version), I am not able to switch antennas for 6 meters (50 MHz). KAT500 always stays on Antenna 3. My work-around solution has been to put my antenna w/ 50 MHz capability on Antenna 3. Any

[Elecraft] Fwd: [K3] For sale: 73CNC weighted VFO A & B knobs

For sale: set of VFO A and B knobs for the K3, photo on my Dropbox, link below. Minor cosmetic dimples are visible in the photo. https://www.dropbox.com/s/9nu35zxz50kapu8/K9QJS_73CNC_K3_VFO_knobs%20-%201.jpeg?dl=0

Re: [Elecraft] K1ZTE - KAT500

Russell, I have the same experience with my 7300 exactly, needing to shift to CW mode to match the KAT500. It’s at the point where it’s just what I do. Dick, I have the cable for connecting the 7300 to an external tuner, such as the AH-4, and I found that it did work fine for initiating

Re: [Elecraft] K3 - "Birdies" on P3 that tracks VFO A

George, Thanks, And my problem is different and I have solved it. I am feeling silly…My antenna switch was not on an antenna.Sorry for the bandwidth. Hoop On Sep 5, 2016, at 11:32 AM, Gmail - George wrote: Hoop, I had a similar problem several years