On Tue, 17 Jan 2012 11:18:01 +0100, you wrote:
Dear Elecrafters,
For a long time I have been using HRD with my K3 and enjoyed it.
But I would like to have additional sliders for high cut and low cut. But
until now I have not been able to locate information about how to add more
sliders than the
On Sun, 25 Dec 2011 09:07:28 -0800 (PST), you wrote:
when adjusting the knob (power level) the value jumps up,
down, slow, fast, all over the place. Sent rig back for upgrade
...came back and this is still a problem...anyone else have this?
Same problem here.
If I adjust power very slowly
On Fri, 26 Aug 2011 08:29:07 -0400, you wrote:
I agree with Dave. If what you were seeing was due to passband ripple,
choosing a different RTTY pitch should make a difference. I don't
believe it does. Not only that, but if it were passband ripple, it would
affect AFSK A the same as FSK D.
My
On Wed, 6 Apr 2011 13:38:08 -0500, you wrote:
Going back through some notes here seems to indicate that once
I downed HRD while meeting the one and only SSB group I enjoy cured
the problem. Why it is so sensitive to only the AGC on/off I have not
a clue. But I had it no more after that.
I
On Sun, 19 Jun 2011 11:14:37 -0400, you wrote:
Just to note firmly that this is not a problem with the K3. Radio
firmware cannot be expected to provide workarounds for any and all
programming mistakes in third party software.
Agree - but since it got much worse after installing ver. 1.08 it
On Sun, 19 Jun 2011 11:32:45 -1000, you wrote:
I don't run windows or HRD in the shack anymore, but I just checked my notes,
and you can change the polling rate and timeout in HRD. Bring up HRD, go in
to Options. Once there, click on the Comms tab. Once there, look
around...there is Polling
On Wed, 1 Jun 2011 14:07:06 -0700, you wrote:
A while back Wayne suggested using a netbook with the KX3 to log and run SDR
software. Someone else I dont remember who - warned that most net books
dont have stereo mic inputs. I looked for a light cheap laptop with stereo
inputs. I
On Tue, 24 May 2011 14:24:00 -0700 (PDT), you wrote:
The other thing that would be a huge selling point in Europe if it could be
designed in is support for the 4m band. There is no radio that covers 4m
apart from a couple of cheap Chinese FM handies.
Oh yes - Hilberling does:
On Wed, 20 Oct 2010 07:38:18 -0700 (PDT), you wrote:
Hi!I wonder the purpose of Menu button in the HRD screen, maybe somebody
uses HRD suite for digimodes and may help me. Is this button deputed to
retrieve current k3 configuration, show it in a friendly graphic view and
let the user to make
Hi.
While attemting to load newest firmware the upload never started and
display says MCU LD and TX is blinking.
Got newest K3 utility but there is no connection to K3.
K3 can now do nothing but blink the TX LED and display says MCU LD.
How do I reset K3 so I can try again?
K3# 3238
P3# 310
On Thu, 02 Sep 2010 18:41:04 +0200, you wrote:
Hi.
While attemting to load newest firmware the upload never started and
display says MCU LD and TX is blinking.
Tnx gentlemen - power cord out in 5 sec and hold power button in 10
sec did it.
--
OV1A Jens
Remember, If you're not in bed by
On Mon, 21 Jun 2010 22:02:42 -0700, you wrote:
AFSK also sets the dial display to the currently selected MARK frequency
rather than DATA A's suppressed carrier frequency.
In general, if you are using a waterfall mode, use DATA A.
Please put mode dependent VOX on the 'wish list'.
--
OV1A
On Mon, 21 Jun 2010 13:03:25 -0400, you wrote:
My new Acom 1000 is due in today. Is there anything I need to do special
to hook it up to the K3?
Set 'TUN PWR' = 020 so you have 20W for tuning the Acom.
K3 Acom1000 is a good combination.
--
OV1A Jens
Whoever ordered pizza by fax, please
On Mon, 14 Jun 2010 10:02:57 -0700, you wrote:
* FIXED FSK-D STUCK TONE: Occasionally, sending RTTY
using the keyer paddle (FSK-D) would leave sidetone on.
Hmmm... CW(KY command) Occasionally stuck with tone when aborted
before finish sending, is not fixed.
--
OV1A Jens
Whoever ordered pizza
On Fri, 21 May 2010 11:56:44 +0100, you wrote:
If anyone does try it, I'd be interested in how they find this USB
conversion. Note that this will NOT
work with the K2 KIO2 as it is not a standard RS232 DB9 connector.
And if you do it on your K3, it will not work with the P3.
--
OV1A Jens
On Tue, 11 May 2010 09:14:10 -0700 (PDT), you wrote:
A couple of products (e.g., Digipan) show you the text from multiple
transmissions at a time, but not all the major products do that
(e.g., DM780).
In DM780 we have 'SuperBrowser' that can show up to 60 QSOs at one
time.
And in chat mode
On Sun, 9 May 2010 18:18:46 -, you wrote:
A set screw screwed into a hole threaded with a taper
tap would force the knob apart and might be the cause
of the splitting.
Thread looks fine here (#3238)
--
OV1A Jens
Drive the way you wish your children would.
On Thu, 12 Nov 2009 14:32:38 -0800 (PST), you wrote:
I have also given up connecting to dxsummit.fi with HRD, but I miss the
filter there for 'CW only' spots, which I haven't found anywhere else.
See the screendump: www.ov1a.dk/images/HRD_Cluster.jpg
Choose a Node form the list and press
On Thu, 12 Nov 2009 15:14:37 -0600, you wrote:
Trying to get HRD (v5 build 2356 beta) to connect to:
http://www.dxsummit.fi/DxSpots.aspx
but I can't find the correct port address to us for the link.
Does anyone have a known good link and port) address?
I just use one of the local BBS'es
Hi.
After uploading FW 3.52 I have no power after using 'tune'.
Shifting to another band (or mode) and back give me the power back.
Newer had this problem in earlier versions.
K3# 3238
--
OV1A Jens
Good decisions come from experience. Experience comes from making bad ones
On Tue, 27 Oct 2009 21:02:08 -0400, you wrote:
The best solution to this is what some software calls an ALIGN or OPT
function. This works as follows: with a wide filter, find the signal you
want by clicking on it in the waterfall; click on the ALIGN or OPT
button which retunes your radio so
21 matches
Mail list logo