Thanks for the replies on my posting about my KAT500 not powering up.It turned
out to be a bad coaxial power connector! My KAT500 is back working like
before.Thanks for the ideas to get my tuner working and it turned out to be a
coaxial power connector, stupid me!Jim Douglas K2ZF
___
Hi All,I have the K line here. I was listening to a QSO and out of the blue my
KAT500 lost power.I disconnected everything from the KAT500 and then
reconnected. The power plug has 12 volts so that is not the problem.The KAT500
was set up to turn on automatically when I turned on the power supply
Please excuse me if this information has been given already.
I spoke to Wayne N6KR at Dayton a few years ago about the KAT3.
To clear all memories in the KAT3:
While in Config:KAT3, tap the "CLR" button on the K3 panel. (This is per band)
Tune KAT3 into a dummy load - each band to re-establish mem
My K3 has developed a problem and fault 6 is displayed on the front
panel.Anyone have information on fault 6. I contacted Elecraft support and have
not heard back from them.
Thanks, Jim K2ZF
__
Elecraft mailing list
Home: http://mailman
4 matches
Mail list logo