No I have it set to SO1V. I would really like to know what’s going on with N1MM
program with the KX2 and 3 with this program.
Jim K9TF
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
When I open N1MM when it opens it is in the S mode and when I switch to RUN
mode the Dual RX propagates its self to all the bands. This is Annoying.
The ATU settings on all bands are completely changed when N1MM was opened. So
this junk was also generated by N1MM.
Both of these issue occur on
That’s just great!
Next thing to do is to work on getting her to say Go with the guys to Dayton
and buy what ever you want!
Cheers
Jim K9TF
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
H Could it be a Long wire, Inverted L or even a comes under so many of the
Slopper perhaps?
Jim K9TF
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
Soun ds like a menu setting is in the wrong setting.
Jim K9TF
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list
Thanks for all the help. The Repeat delay is now fixed.
Part of the problem was the timing and not enough space.
The majority of the problem was with what as typed in for the the different F
keys. Very touchy on how or what was typed. Once all the errors and bugs were
fixed the Repeat delay
Here is a correction from last post
Erase the <04> in the F# lines that has it. This controls the CW speed which
does not work on the KX2 or KX3.
Jim K9TF
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
I finally got the functions to work mostly. On my KX2 and KX3
Here is what I did. It seams I got rid of most of the funkiness due to spaces
in the wrong place and so on.
Pay attention to S F1 with out the {S} when hitting the F1 key it would
send properly then switch back to Run so it was
Here are the other issues. The CQ Repeat function has no Pause like 5 seconds
then starts. The Repeat Time setting Does not do any thing that I have
noticed.
Also CW speed control does not work. I works manually when I turn the knob on
the KX2 and 3.
Jim K9TF
From: Jim GM
No Running N1MM Logger +
I am running KX3 and KX2 with Windows 10 on a Surface 3 is what I am running.
Also running the same 2 radios on RumLog on my Apple computer. ZNo problems
with the Apple.
Just maybe it might no be the N1MM but Windows 10. If other people have the
same issues then It
It is not the radio but the N1MM program. Not only does my KX2 react that way
so does my KX3.
Baud rate does not matter. I think N1MM is a bit unstable on my Microsoft
Surface 3. I run RumLog on my Apple computer and both radios work just fine.
I used N1MM for the 13 colonies over the 4th of
I worked 15 stations on Field Day weekend with in an hour on my 160m antenna
on 20M. Worked just fine.
Started to use N1MM logging and attested programming F keys for CW found the
infor on line and help from K9JWV got it working through only ONE USB port. Do
not know what the KY codes are or
HI Elecrafters
I have a confession, I have been Running RumLog with my KX3 for several years
with my Mac Mini Apple computer and love it. I just got a Microsoft Surface 3.
I want to run a logging program that interfaces with the KX2 and KX3 using one
USB com port.
N1MM is a nice program but
Just had to recharge battery for the first time.
I used just about 2.1 hours of battery time. Real time I had the radio on for
just over 7 hours calling CQ and just in the receive mode. Output of my KX2
was 5 watts and the Battery Min was set for 9.0 V.
My question what is a better setting
So with the new card installed it would take over 83000 hours to drain the
battery. WOW that’s 3458 days almost 9 years.
Jim K9TF
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
OK so if this board is not installed, how much power does the KX2 draw when
turned off?
Jim K9TF
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
Hi
Does the KXIO2 board Draw power with the radio turned off? If so how much does
it draw off the battery?
With the KX2 turned on how much is the KXIO2 power draw?
Jim K9TF
Sent from Mail for Windows 10
__
Elecraft mailing list
Hi
It not like me if I do not make a suggestion. or complain.
This radio has every thing you want in the field.
The most important spot for this radio is on a tap of a half barrel on
Field Day. Any have an attachment for this?
Cheers!
--
Jim K9TF
Durring the last month of the ARRL Centennial QSO Party I was behind on
points to get into the top tire. So I finally turned on the amp and started
calling CQ on 20 -10 Meters. I noticed the the amp was getting hot and
finally tripped out on high heat. cooling fan helped but not as well as I
I have a blind friend who has a KX3. He called me last night. between my
questions and his I keep looking into the manual.
His question last night was, the function, CW Announcement , that tells you
in CW the frequency, or SWR or what button you had pushed, the CW speed is
too slow. He wants to
OK what do I need to change on my KX3 Menu?
As I increase power from 4 watts to 100 watts I hear a series of clicks one
at 5 watts and one at 10 watts from the amp. Each time there is a click the
receive signal drops like an attenuator. The attenuator on the back of the
amp is in the OUT
OK what do I need to change on my KX3 Menu?
As I increase power from 4 watts to 100 watts I hear a series of clicks one
at 5 watts and one at 10 watts from the amp. Each time there is a click the
receive signal drops like an attenuator. The attenuator on the back of the
amp is in the OUT
Maybe I can help.
Go into Menu and check to see if PA MODE is OFF.
Also so checkVOX setting by using the DLY button next to the main tuning
knob and put in in PTT mode.
Let us know what happens. I had the same thing happen when I remove the
KXPA 100 from the KX3.
--
Jim K9TF
I have a KX3 and KXPA100. I want to put up a receiving loop antenna for
160M and transmit with my short marconi 160M antenna. What do I need to do
to accomplish this?
Switching things the way they are now takes too long and too many
operations so I pretty much gave up on the project.
--
Jim
Hi
Ok I down loaded K3FreqMemoryEditor_1_3_3_0.msi file. I have a Mac Mini
computer, Apple CPU.
Where do I move the above file into so I can run the program insert my .XML
file and load the frequiency memory file, the XML file, inot the KX3?
I have never done this before and have no
Just received my PX3,
Power cable has no fuse so I cannot hook up to my 50 amp supply What cord
do I need to purchase?
My main concern is I can not see a signal on it that I am listening to on
the KX3. I see spikes and noise floor but no signals. I can adjust DISP,
Average REF, SCALE, SPAN.
Carl TNX for responding so fast.
No I do not. Just turned it on and now I can see signals.
What else do I need to turn on in the KX3?
--
Jim K9TF
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
TNX FOR ALL YOUR INPUT ON THIS.
I found that by running the radio until the 8.5V limit is hit on the KX3
and it shuts down I took out the batteries and tested them on a Radio shack
battery tester that I had, I let the thing load the battery and watch for
the reading drop. All cells held their
by about
50% or so. If you know that, you would just charge for 8 hours or 12
hours.. whatever fits your schedule.
73 de Ray
K2ULR
KX3 #211
On Aug 24, 2014, at 4:08 PM, Jim GM wrote:
TNX FOR ALL YOUR INPUT ON THIS.
I found that by running the radio until the 8.5V limit is hit on the KX3
I have 8 NiHg batteries and charged them for 16 hours. Charge lasts 5
minutes before KX3 goes dead. Minimum voltage is set for 8.4V. with a 13.6
volts 50 amp DX Astron supply max charge voltage get up to 10.6 VDC says my
KX3. When checking the voltage independantly on each cell they all give me
NiMh I ment to post. Oh well
--
Jim K9TF
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by:
I did check the voltage on each cell when depleted.. There is a sleeper or
2 in the bunch.
--
Jim K9TF
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
Thank you for all the input.
Antennas are a fun thing to talk about and something every one seams to
enjoy and building their own, like I do. I had many wires antennas in the
last 46 years. I am still learning. One thing I have not done is get a
computer program for my Apple Computer and an
What antenna lengths are you using on 160M with your KX3 or KXPA100
internal tuner? What is best for 160-6 meters? I like making my own
antennas with wire.
I usually have to give up one band or another cause it just would not tune
up on a certain band.
I have tried to stay with in these guide
I have tried a 6:1 balun at the feed point of the inverted L. How ever it
presents a significant loss while QRP with 5 W. Just does not have enough
isolation from ground. yet it presents a good match. Go figure.
--
Jim K9TF
__
Elecraft
Hi I am just an old Newbie on this forum. Not up to date on all of the
discussions.
What Macros do you have your radios set up for?
CW DXing and Contests is what I do. Not into Digi or RTTY as of yet.
After 3 weeks using this radio I am still amazed on the performance and
what this radio can
Hi Bill
KX3 Mac Utility is working just fine except for AFSK I think user error and
will figure it out later. I did see that and had set Baud to 4800 on
RumLog. usbserial-A703095C was selected for the port. I had also turned off
the KX3 Utility and RumLog is not working.
I tried turning off and
Thank you Joel
Is that all I had to do? I had it set for 4800 KX3 default. Setting the
baud rate to 38400 did it. Cant't wait to see what fun I will have with it.
Age here is 61 and had my ticket since May of 1968.
--
Jim K9TF
__
Hi
I am having issues in getting RumLog Version 5.3.7 logging program working
with my KX3. How do I set up RumLog to work? What do I need to set in
preferences?
I am able to get KX3 Utility to work fine so there is no issue there I do
not think.
--
Jim K9TF
KX3 OSX Utility will not work or see ports. Looks like I need a Mac OSX
drive for it. What drive do I need to down load so it will work with
RumLog, RumPed and KX3 and KX3 Utility? x86, x64 or PPC?
I have a Mac Mini Mac OSX version 10.6.8 Snow Leopard.
http://www.ftdichip.com/Drivers/VCP.htm
40 matches
Mail list logo