I ran a single-op QRP effort in the ARRL 160M contest this weekend. I ran
about half the time with my K2, and the other half with my K3 @ 5 watts. It
was interesting to compare the two rigs.
I did not run any laboratory tests, so this clearly falls into the category
of opinion. But the K2 DSP
The Mojo continues! I finished the K3 this weekend. The first two
answers to my CQ were Paraguay and Chile. Then I worked 5T5DC split
on 40M. So, how do you get non-DX stations to answer you? :-)
I am still learning the rig, but wow -- that receiver is sure quiet.
I am loving life!
With the FM filter in slot 1 and the 2.7 kHz filter in slot 3 (slot 2
empty). The latest firmware is installed:
I go to any band and select USB. The rig is set at 6.0 kHz bandwidth
and FL1 is selected. I change it to 2.7 kHz and FL3.
I then go to CW on another band. When I switch
K3 Serial number 611 was waiting for me when I got home this evening.
It was ordered on 09/04/07.
73,
John, WA6L
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr.
I tried and tried, but I finally had to give in. I ordered my K3
today. Delivery will be late November or early December.
73,
John, WA6L
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
My K2 just started doing the same thing. I redid all the solder
joints between the board and the encoder, then checked the list
archives to see if anyone else had that problem.
I am going to order and install a new encoder. The reason I think
that it is the encoder itself is that with
Special event station K6S will be operating from the American Cancer
Society's Relay for Life at the UCSD campus in La Jolla
California. This will be a 2B (solar and battery) QRP operation
featuring a K2, a K1, and a PSK-20 from Small Wonder Labs.
We will undoubtedly be doing a lot of
the CW filter settings that you found useful.
Thanks in advance.
robert #5957
At 06/04/2007 12:42, John Graf wrote:
--
The world is best viewed through the ears of a horse.
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must
Excellent!! Thanks for taking the time to write and for the in-depth
explanation. I am constantly amazed (and grateful) for the expertise
available here on the reflector.
I will be working to correct the problem this weekend. I have used
Spectrogram (though obviously not well) and
I've been experimenting with the DSP filters on my K2 and I have
found several combinations of DSP and crystal filtering that work
very well on CW (at least for me). However, I have run into a
strange phenomenon.
Here is how I reproduce it: I set my crystal filter at its widest
Hi, Folks,
I lost power out on both 10 Meters and 12 Meters. Reception on those
bands is fine. Other bands put out full power.
Any ideas of where to look? I would think that the band-pass filters
are good if I can receive. I'm not sure what else is specific to
those two bands.
From what I've seen of the K3, it is truly an impressive rig! But I
think I am going to stick with my plans to build a K2 this summer.
Having built the K1, I think I am hooked on the full-blown kit-
building experience.
So with that said, what is the future of the K2 (and K1)? How long
12 matches
Mail list logo