Message: 2
Date: Sun, 17 Mar 2013 12:23:57 -0400
From: John Griswold k...@kk1x.net
To: elecraft@mailman.qth.net
Subject: [Elecraft] KX3 keyer
Message-ID: 5145ee1d.20...@kk1x.net
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
I was practicing with the keyer at 15, and all
doing, but is there a known
issue? I do not have the skill to send at 20 - I am just checking. I
managed to reproduce this at 17, but it's much more difficult. At 20, I
can confuse the keyer quite easily.
Thanks -
John KK1X
--
+-+
|John Griswold, KK1X |
|k...@kk1x.net
should be from each device to a single
point ground.
Yes, I know that laptops with plastic cases are difficult to find a
good place to connect the bonding strap - in that case, the galvanic
isolation is the easiest solution.
73,
Don W3FPR
On 3/1/2013 7:17 PM, John Griswold wrote:
I am using
display changes. I have posted a picture
http://www.kk1x.net/photos/psk.jpg for those interested.
I'm curious to know why this is - now that I know why it happens, I'm
pleased, but I wonder if anybody on the list could explain it to me.
Thanks 72,
John KK1X
--
+-+
|John
that there's something else wrong
c) oh, just let it go John. You're such an engineer (OK, a little bit of
projecting my XYL there)
I'm using the supplied test antenna in lieu of having a really cool
signal generator, if that has any bearing.
Thanks 72,
John KK1X
--
+--+
| John
Griswold wrote:
On Page 10, the first instruction is to Rotate PBT I/II to display
BW 0.60. Note that the XFIL display changes from FL3 to FL2.
snip
--
+--+
| John Griswold KK1X |
| k...@kk1x.net
collector should be up in the 12v range given my
lower input voltage. Voltage on either lead of RFC5 is ~12v, as is the
high end of R33.
I'm not quite sure what I should read from this - I'm just a software
guy. Could someone provide a bit of guidance?
Thanks 73,
John
--
John Griswold, KK1X
j
7 matches
Mail list logo
