Just finished my second K2 #5653
John K5XTX
_
Dont just search. Find. Check out the new MSN Search!
http://search.msn.click-url.com/go/onm00200636ave/direct/01/
___
Elecraft mailing
I want set up my K2 with some selctable PBT presets and perhaps just 2
filter widths. I frequently use +150 to +250 Hz with my other rig for narrow
1.8kHz filters. I am currently just using the KDSP2 filter with decreasing
filter widths and no offsets. What are K2 users favorite ways for
I hooked up my K2 to my SteppIR for the first time in few years and the
serial interface is muting the audio and the S meter flashes solid on my
basic K2. The antenna is tracking band changes properly in General Coverage
Mode, Kenwood/4800, with the K2 interface cable. I seem to remember doing
Can I add the 2 new resistors (R4 R33) specified in the, K2/100 MANUAL
(Appendix G) ERRATA Rev. C-3, December 14, 2004, without having to
recalibrate anything?
What is the effect of changing changing R4 from 100 k to 39 k in the High
Voltage Bias Supply.
Thanks,
John K5XTX
What is the best way to protect a KAT100 from ESD while in a Pelican case?
Last year I had to replace the1N5711s, D1 D2, after flying with my K2.
John K5XTX
_
On the road to retirement? Check out MSN Life Events for advice on how
I have recieved an overwhelming amount of info on antennas that may take few
days to read through. There is some work to be done on my ground system as
well.
A little progress was made by adding one radial, which made my TT 253 happy
on 20m. The K2 and TT tuner are indicating consistent
Don,
I currently have the antenna attached to a good earth ground and will add
radials for each band per your suggestion. I understand that radials can
significantly improve the efficiency of monopole antennas. Should I try to
add more then one radial per band?
Thanks,
John K5XTX
I recently built a KSB2 with the now standard 2.3Khz filter configuration. I
have been recieving compliments on the TX audio quality. Some have said the
SSB audio is the best they have heard from a K2. The filter sweeps on
Sectrogram show less ripple and more symmetry then my previous 2.5kHz
I put up a 125' long wire antenna at 35' this weekend. It tunes up well
10m-80m running directly to the KAT2. I am wondering if I should ad an
unbalaced feedline and a 4:1 current balun between the tuner and antenna.
Would this reduce potential RF in the shack or change the antenna's
9 matches
Mail list logo