Real world implementations of antennas are constrained by
the type and location of support structures that are on site.
That said, put it up and see how it works.
Any antenna is better than none.
Bob K3YT
___
Elecraft mailing list
Post to: Elecraft
Ok, so who's using my name
Bob Scott
K3YT
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo
it by putting a 90 degree fitting on as
a weatherhead.
Don't fill it with expanding foam...you'll regret it. A small piece of
fiberglas insulation will keep out wind and critters.
Anyway that is what I didthe cheap way and still is fine.
Went throught Frances, Jeanne and Wilma.
73 de Bob K3YT
automatic couplers at the feedpoint(no SWR on the feedline).
My 2 cents, but from practical experience and 30 years of ham radio.
73 all de Bob K3YT
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list
RTTY is LSB
K3YT
Bob Towers [EMAIL PROTECTED] wrote:
=
How come data mode r bar is USB when USB is the default for all bands and data
modes? Shouldn't data mode r be USB, not LSB?
73
Bob
2M0KDZ
___
Elecraft mailing list
Post
, but in the old days
that is the way it was. You might still encounter people holding to the
convention of LSB.
That is why the K2 data mode has an R for RTTY and is LSB.
73 de Bob K3YT
Bob Towers [EMAIL PROTECTED] wrote:
=
Are you sure RTTY is LSB?
Any time I've - mistakenly - set
that is paid
for in your
monthly fees, this extortion won't work.
BTW, after the Hurricanes in the last 2 years they are glad to have me here.
73 all de Bob K3YT
[EMAIL PROTECTED] wrote:
=
TV antennas are specifically exempted from CCRs. Or rather, the restrictions
are Federally
My roofline is 22 feet. I can go 10 feet over it.
I told them I was putting up a 32 foot tower with the TV antenna.
No bluff to call. I knew what I could do.
BTW I am in lot 1 right next to the gate.
73 de Bob K3YT
[EMAIL PROTECTED] wrote:
=
In a message dated 3/22/06 6
I would have put up the TV tower and antenna
and used it.
Instead of that eyesore they opted to let me continue to have my ham vertical.
The R7000 has clean looking traps.
73, de Bob K3YT
Phil Kane [EMAIL PROTECTED] wrote:
=
On Wed, 22 Mar 2006 20:06:41 -0500, [EMAIL
practice, but guys do it
and say it works.
I think my K2 is an excellent rig and will not risk it by hooking it up
to a coax switch with another rig.
73,
Bob Scott K3YT (originally WD8PLA) 29 years of heating the air with wire)
___
Elecraft
Hi,
You should have got the addendum(sp?) sheet to the manual.
It tells you to add after the steps on page 64 the note to return to page
47 and re-do the AGC and S-meter.
73, K3YT
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You
on the shield/ground.
Just not worth the risk. Here in South Florida I disconnect the rigs from
the coax switches
when they are not in use.
73 de Bob K3YT
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post
The Daiwa CS201 DOES ground the unused terminal. Check it out.
K3YT
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net
here. But the
Radio Shack 21-1172 is only $25 and works fine.
Why pay all that money for a name?
73 de Bob K3YT
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change
Hi John,
You obviously don't have any CATS.
Mine would think that was their own personal Disney
World.
I did not pre-sort my caps, but did inventory them
and then put them back into a feline-proof
container.
K2 5150 went together without a problem.
73 de Bob K3YT
Latching relays are used for the 160M band pass filter and the RX antenna
switch
from the K160 RX manual
K3YT
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change
sri that should say low pass
K3YT
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help
They would be saved here in South Florida...
Any 12 sla or otherwise was useful after Wilma
hit Boynton Beach here. Power was finally restored to
Pahokee in the western part of Palm Beach County yesterday,
110 days after the storm.
73 de Bob K3YT K2 sn 5150
Hi Karsten,
I have found the same thing. I have bad power line noise.
Sometime the K2 NB takes it all out, sometimes not.
My IC-735 takes all the noise out.
I get the KNB2 to work sometimes by putting the pre-amp
ON, then try both high and low thresholds, and both timings.
73 de K3YT
Hi,
No controls working but the Power
control is an instant clue to the rig being keyed.
Good job.
73 de Bob K3YT
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr
Hi,
the lb for pound comes from Spanish(and its close Latin)libra
meaning pound.
73 de Bob K3YT
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc
Dad's wall wart is probably a switcher and the source of the noise.
73 de Bob K3YT
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http
an inexpensive mike at radio shack and if you
don't like it you can take it back.
I am just saying this because I have found that most desk mikes are pretty
but
very expensive and don't always work the best.
73 de Bob K3YT
___
Elecraft mailing list
Post
easy way to remember
A...ANODE
A...ARROW
K3YT
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo
of drive and excellent audio reports
just like I received with the 990.
Go to Radio Shack and try a cheap studio mike. If it does not
do the job you can always return it.
73 de Bob K3YT (28 years of frugal ham radio)
___
Elecraft mailing list
Post
these folks were running multi-element yagi arrays.)
I'm suitably impressed. Fine radio.
BTW, I just strapped the mic header across and am using
a 20 year old or so Lafayette 700 ohm dynamic mike (from a CB?).
No drive problems and all reports so far are fine clear audio.
73 all de Bob K3YT
I have to second that.
I was using a gateway monitor, but went to the Dell 17.
Virtually no noise.
They are made by Phillips.
73, Bob K3YT
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list
Very pleased to report
that third smoke test went
fb.
K2 sn 5150 is alive.
73 de Bob K3YT
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http
an almost daily occurrence, so adding parts, cutting
lands etc
does not really bother me.
So so far no glitches, and by taking my time and double and triple checking
before I install parts, no rework.
I'll let you know when it is done.
73 all de Bob K3YT
years,and there is a place for contesting.
I guess I was mistaken thinking this was a K2 technical reflector.
73 de Bob K3YT
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr
here in South Florida since 1978 and soon learned the importance
of emergency preparedness.
And thanks for the advice, yes I will continue to delete the contest
posts...
73 all de Bob K3YT in Boynton Beach
-Original Message-
From: Robert Tellefsen [EMAIL PROTECTED]
To: [EMAIL
31 matches
Mail list logo