[Elecraft] Re: [K3] CW decode not working, solved

t; > The firmware is 2.02. > > I tried CW text decode function, setting it up as shown om P. 31 in the > manual. > > I get no decoded text on the display. > > Also tried RTTY decode. AFSK A and also no decoded text. > > What do I do wrong? > > 73, Mat

[Elecraft] [K3] CW decode not working

. What do I do wrong? 73, Matti -- Marteinn SverrissonTF3MA Langitangi 2Internet: tf3ma [at] raunvis [dot] hi [dot] is 270 Mosfellsbær <http://www.raunvis.hi.is/~tf3ma> Iceland ___ Elecraft mailing lis

RE: [Elecraft] CW Secrets of the Masters

improves SNR when copying low pitch CW signals. This simple mod increases the rx audio signal at 300 Hz by about 3dB. This could help those copying low pitch CW signals. just my $ .02... 73, Matti, TF3MA -- Marteinn SverrissonTF3MA Langitangi 2Internet: tf3ma [at] raunvis

[Elecraft] Separate list for K3

ss book or whatever you use, and cut and paste the subject ... 73, Matti -- Marteinn SverrissonTF3MA Langitangi 2Internet: tf3ma [at] raunvis [dot] hi [dot] is 270 Mosfellsbær http://www.raunvis.hi.is/~tf3ma

Re: [Elecraft] K2 SSB adjustment

25 and C26, extending the low frequency response to approx. 320Hz. It also helps with SNR when copying low pitch CW signals. just my $.02 73, TF3MA, Matti K2 #2024 -- Marteinn SverrissonTF3MA Langitangi 2Internet: tf3ma [at] raunvis [dot] hi [dot] is 270 Mosfells

[Elecraft] K2 -- RX audio

-Tal filter -- Marteinn SverrissonTF3MA Langitangi 2Internet: tf3ma [at] raunvis [dot] hi [dot] is 270 Mosfellsbær http://www.raunvis.hi.is/~tf3ma Iceland ___ Elecraft mailing list Post to: Elecraft

Re: [Elecraft] Sherwood report and K3 agc

Hi At 10:37 AM 2007-06-08, Don Rasmussen wrote: Which one is which? according to: nc2030_pres_2004_10.pdf (Google it) page 17 First NC2030 then K2 First sample: background impulse band noise Second sample: W1AW with lots of QSB 73, Matti -- Marteinn SverrissonTF3MA

RE: [Elecraft] Sherwood report and K3 agc

, Matti -- Marteinn SverrissonTF3MA Langitangi 2Internet: tf3ma [at] raunvis [dot] hi [dot] is 270 Mosfellsbær http://www.raunvis.hi.is/~tf3ma Iceland ___ Elecraft mailing list Post to: Elecraft

[Elecraft] K3 datamodes decoding to CW?

Hi I have one question regarding the Data modes decoder on K3, can it send the decoded message to the speaker using Morse code, as well as displaying the text on the LCD? 73, Matti, TF3MA -- Marteinn SverrissonTF3MA Langitangi 2Internet: tf3ma [at] raunvis [dot] hi [dot] is

Re: [Elecraft] spectrogram for mac or linux?

://www.raunvis.hi.is/~matti/TF3MA/lsb_usb.png -- Marteinn SverrissonTF3MA Langitangi 2Internet: tf3ma [at] raunvis [dot] hi [dot] is 270 Mosfellsbær http://www.raunvis.hi.is/~tf3ma Iceland ___ Elecraft mailing list Post to

Re: [Elecraft] K2 - How good on SSB?

, No problem using qrp, 15w during the first years, specially on the high bands. Now as we are in the bottom of the sunspot cycle, I have to use the kW linear, specially on 40 and 80 73, Matti -- Marteinn SverrissonTF3MA Langitangi 2Internet: tf3ma [at] raunvis [dot] hi [do

[Elecraft] KAT100 as antenna analyzer

commands, and menu values: FREQ: FA3505580; 3505.580kHz SWR: [EMAIL PROTECTED]>I; 1.1-1 L: [EMAIL PROTECTED]; L01.3uH C: [EMAIL PROTECTED]; C0.45pF NET: [EMAIL PROTECTED]; Cin -- Marte

RE: [Elecraft] Re: MFJ259

took only abt a week, to get the kit from VK land to TF, total cost incl post abt U$100. 73, matti -- Marteinn SverrissonTF3MA Langitangi 2Internet: tf3ma [at] raunvis [dot] hi [dot] is 270 Mosfellsbær http://www.raunvis.hi.is/~tf3ma Iceland

RE: [Elecraft] Re: MFJ259

connect the antenna, and set the output level to 1 og 2 Watts, and key the K2 in CW mode, the SWR leads will show the antenna SWR (the range from 1:1 to 1:5), just my $0.02 73 Matti -- Marteinn SverrissonTF3MA Langitangi 2Internet: tf3ma [at] raunvis [dot] hi [dot] is 270

Re: [Elecraft] Antenna Analyzer

Hi VK5JST Aerial Analyzer, covers up to 30MHz, a kit is abt $100. take a look at: http://www.users.on.net/~endsodds/analsr.htm 73, Matti -- Marteinn SverrissonTF3MA Langitangi 2Internet: tf3ma [at] raunvis [dot] hi [dot] is 270 Mosfellsbær http

[Elecraft] Re: BFO oscillator level

big issue for me, just a little annoying. thanks and 73, Matti -- Marteinn SverrissonTF3MA Langitangi 2Internet: tf3ma [at] raunvis [dot] hi [dot] is 270 Mosfellsbær http://www.raunvis.hi.is/~tf3ma Iceland

[Elecraft] BFO oscillator level

not change when the BFO freq is changed. 73, de Matti -- Marteinn SverrissonTF3MA Langitangi 2Internet: tf3ma [at] raunvis [dot] hi [dot] is 270 Mosfellsbær http://www.raunvis.hi.is/~tf3ma Iceland ___ Elecraft

RE: [Elecraft] Sidetone

and happy new year Matti -- Marteinn SverrissonTF3MA Langitangi 2Internet: tf3ma [at] raunvis [dot] hi [dot] is 270 Mosfellsbær http://www.raunvis.hi.is/~tf3ma Iceland ___ Elecraft mailing list Post to

[Elecraft] KPA100 spurs

84, 28.015, 28.260, 28.671, 29.314 these are definetly from X1 as the freq shifts when PA is turned on by setting the power >10w. Any suggestions 73, Matti -- Marteinn SverrissonTF3MA Langitangi 2Internet: tf3ma [at] raunvis [dot] hi [dot] is 270 Mosfe

RE: [Elecraft] OP1 and CW filter gain difference, solved

do not have as much attenuation of the signals as before, now the CW filter loss is abt 3 to 6dB rel to the OP1. I can live with that :-). 73 de TF3MA -- Marteinn SverrissonTF3MA Langitangi 2Internet: tf3ma [at] raunvis [dot] hi [dot] is 270 Mosfellsbær

Re: [Elecraft] OP1 and CW filter gain difference?

relative to the OP1. Maybe this is normal, 73 de TF3MA -- Marteinn SverrissonTF3MA Langitangi 2Internet: tf3ma [at] raunvis [dot] hi [dot] is 270 Mosfellsbær http://www.raunvis.hi.is/~tf3ma Iceland ___ Elecraft

[Elecraft] OP1 and CW filter gain difference?

measurements with AGC off, using noise gen and audio spectrum analyzer. Is this normal? Should I look for some bad X-tals or varicaps in the CW filter? 73 de TF3MA PS. same results if I unmodule the KSB2, the gain is still low. -- Marteinn SverrissonTF3MA Langitangi 2Internet: tf3ma

Re: [Elecraft] Linux

, etc of the K2, for more information and screenshoots, see: http://www.raunvis.hi.is/~matti/TF3MA/MALog.php the program is GPL'ed and is free to download for everyone. And I you know TCL/TK it is easy to modify the program to suit you needs. 73's Matti, TF3MA -- Marteinn Sverrisso