Re: [Elecraft] Power has disappeared

3. I would set the temp calibration back to where it was before shipping it back to Elecraft. Especially since it appears that is the only change you made before the loss of power occurred. -- View this message in context: http://elecraft.365791.n2.nabble.com/Power-has-disappeared-tp7620735p76

Re: [Elecraft] K3: RE: Constant Level Line Out Monitor of Xmit Audio

Reviving this thread, because I don't think we ever got a comment from the mother ship. The ability to feed monitor audio to LIN OUT without having it in headphones or speaker is very useful for contesters. Most SO2R ops prefer never to hear their own CW, but recordings that *don't* have it

Re: [Elecraft] K3 Split Operation

I used to use my A and B VFOs on the Omni VI for switching bands during the Sprint. I could assign VFO A to 20M and VFO B to 40M on radio 1 and VFO A to 40M and VFO B to 80M on Radio 2. With my K3s, I do not intend to use the subreceiver option ever. Is it not possible to have split

[Elecraft] K3 "SPKR+PH" Configuration

I'd hoped to use this configuration in the FL QSO Party next weekend so the driver could hear what was going on while the operator had the benefit of shutting out road noise with headphones. Setting the option to "YES" does indeed enable the SPKR, but headphones change to sound in left ear only a

Re: [Elecraft] AFSK on K3

I just ran some tests here. The K3 data modes called DATA A and DATA A REV are working in transmit with LINE IN and should work with any soundcard mode, including AFSK. The K3 data mode called AFSK appears to not be working properly in transmit. Unfortunately, DATA A doesn't work very well

Re: [Elecraft] AFSK on K3

Make sure you have the latest firmware. Up until the recent release there were problems with the Line In. One problem was that although you had Line In selected, it really wasn't selected unless you went in to the menu and selected another input and the re-selected Line In. I would try tha

[Elecraft] AFSK

I'm unable to transmit an AFSK signal in DATA mode, although I can transmit RTTY in LSB mode. The line output from my computer soundcard does have the audio signal on it and is connected to the Line In mono jack on the K3. For MIC SEL in configuration, I have Line In selected. DATA MD is set to