Hi John,
The P3SVGA board uses the P3's front end (down converter and a/d) making it
difficult to operate in a different span than the P3.
73,
Paul
--
View this message in context:
http://elecraft.365791.n2.nabble.com/P3SVGA-Question-tp7403386p7429789.html
Sent from the Elecraft mailing li
Hi Phil,
Have you checked all the connections, IF cable and the little RG-174 cable
internal to the P3?
73,
Paul
--
View this message in context:
http://elecraft.365791.n2.nabble.com/P3SVGA-problem-immediately-upon-installation-tp7406098p7429845.html
Sent from the Elecraft mailing list arch
Hi Scott,
When the P3SVGA board is installed the K3's 12V accessory output is right on
the edge of being able to supply enough current.
We are working on a mod kit for the K3 and should have it available soon.
73,
Paul
Scott wrote
>
> I have read the PDF manual as published at the Elecra
Hi Tom,
We made the marker lines wider on the SVGA to be more visible given the
greater resolution and number of pixels. As you know, a 2048 FFT is
performed on the SVGA, completely separate from the P3's FFT. In fact the
SVGA while very similar to the P3's display by design is not going to be
We're investigating this problem with the SVGA on some customers' monitors in
the 1920x1080 resolution. For example my Acer P236H monitor has no problem
syncing to the SVGA's video signal. We'll let you know as soon as we have
a solution.
73,
Paul
--
View this message in context:
http://e
Hi Igor,
We found the higher baud rates unreliable with some combinations of
equipment. We'll be providing much better throughput in the future using
some form of data compression.
73,
Paul
--
View this message in context:
http://elecraft.365791.n2.nabble.com/P3-v1-13-firmware-is-now-avai
Adrian,
Can you message me your email? I will then forward you the .zip file.
-Paul
--
View this message in context:
http://elecraft.365791.n2.nabble.com/P3-v1-13-firmware-is-now-available-tp7406823p7407713.html
Sent from the Elecraft mailing list archive at Nabble.com.
Adrian,
The server is up as far as I can tell, I am able to download. I will email
you a copy of the firmware just in case you are still having trouble.
73,
Paul
vk4tux wrote
>
>>From P3 Utility;
>
>
>
> 22:07:52 Opening connection to ftp.elecraft.com
>
> 22:08:13 InternetConnect comp
P3 version 1.13 is now available from the Elecraft website and FTP via P3
utility.
Release notes for this revision:
Removed 57,600 and 115,200 baud from the RS-232 menu.
Added "SVGA font" menu selection to change font size on external display.
(Requires upcoming new release of P3SVGA firmware)
Hi Toby,
I was able to duplicate it here in the lab, so it's on the list for the next
release.
Thanks and 73,
Paul
--
View this message in context:
http://elecraft.365791.n2.nabble.com/P3SVGA-Question-tp7406623p7406660.html
Sent from the Elecraft mailing list archive at Nabble.com.
Hi Bill,
It is my understanding that a version is in the works.
73,
Paul
w4ish wrote
>
> Will there soon be the P3 Utility SVGA for the Mac? I discovered the hard
> way that if you update the P3 Software to 1.12 via the Mac Utility, it
> introduces strange bugs into the SVGA operation. (Li
Hi Bill,
The SVGA hardware allows the waterfall height to be set much higher than
what is available on the P3. Until we have the ability to independently set
the waterfall height on each display, we wanted customers to be able to take
advantage of this feature.
73,
Paul
--
View this messag
Hi Roy,
No it does currently provide any sort of screen saver.
73,
Paul
--
View this message in context:
http://elecraft.365791.n2.nabble.com/P3SVGA-tp7384489p7386283.html
Sent from the Elecraft mailing list archive at Nabble.com.
___
Hi Mike,
The PF1 command is used to control whether the PF1 (long keypress of BAND+)
performs either a frequency sweep or sends the Morse memory. Using the XG3
Utility, use the Command Tester tab to enter the command PF1,0; This
will select the frequency sweep 1 to operate when the Band+ is
Hi Jack,
If you take a screen shot, do they show there?
73,
Paul
--
View this message in context:
http://elecraft.365791.n2.nabble.com/P3-Artifacts-On-The-Waterfall-Display-tp7377177p7377414.html
Sent from the Elecraft mailing list archive at Nabble.com.
Many of you have asked if there is a way to modify your K3 so that it can
provide enough current to supply a P3 with the SVGA board. We are currently
working on a mod kit that will do just that. We'll let you know as soon as
we have something available.
73,
Paul (n6hz)
--
View this message
P3 firmware revision 1.12 is now available for download from the Elecraft FTP
server. Use the P3 utility to retrieve and install the firmware.
This version fixes two issues found in the v1.11 release:
* Fixed bug that sometimes caused high noise levels on the external display
upon span change
ection within the
> P3? I understand that the cable itself might go up in smoke but at the
> present time I'm only really worried about the P3.
>
> 73,
> Mike K2MK
>
>
>
> Paul Saffren N6HZ wrote
>>
>> Hi Bill,
>>
>> We're going
Hi Andrew,
I can help you.
If you like you can give me a call at Elecraft, it might be easier over the
phone, or I can explain it here.
73,
Paul
Andrew Mason Jr. wrote
>
> Iam having problems programing the xg3 to send cw.
> 73,
> Andy
>
Hi Bill,
We're going to start shipping a 6' 2.1MM power cable with every P3SVGA board
ordered. The other end of the cable is bare and can be used to connect the
P3 directly to your 12V mains. This should start by tomorrow or the next
day. If your SVGA hasn't shipped yet, there'll be one in the b
Detlef,
We've been able to duplicate this in-house at Elecraft and are working on a
solution. From what I can see, it only occurs when the P3 is in fixed tune
mode. As soon as new firmware is available, I will put it up for
distribution.
73,
Paul (n6hz)
Detlef Fischer wrote
>
> Hi to al
There's probably a very good chance that we'll be implementing keyboard
macros on the P3SVGA Keyboard Interface. Either function keys or some other
keystroke combination is my guess.
73,
Paul (n6hz)
--
View this message in context:
http://elecraft.365791.n2.nabble.com/P3-P3-SVGA-Keyboard-fu
Hi Roger,
Here are the pages from the XG3 manual (11-13) that describe the use of the
CW/RTTY sender:
RTTY Sender
Starting with version 1.14, the XG3 contains a Morse code and RTTY sender
with memory function. The Morse code sender can be adjusted for WPM (words
per minute), and the memory ca
My vote: extra battery, space for a DC and programming cables, plus bnc cable
and maybe an adapter or two. What would be nice is if the case could have
some relief for the power button.
-paul (n6hz)
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Attn-XG3-owners-tp6416877p
Remember those watch bands from the 70's? We built up a scale model in the
shop and it fits perfectly on one's forearm.
paul
--
View this message in context:
http://elecraft.365791.n2.nabble.com/KX3-Pedestrian-Mobile-tp6392086p6394767.html
Sent from the Elecraft mailing list archive at Nabble.
Hi Richard,
What frequency are you generating where you notice this?
The XG3 has 1 Hz resolution over it's fundamental range of 1.5 to 200 MHz.
The calibration should be done at 10 MHz as this is the frequency of the
internal crystal. The values entered for the calibration values do not
nec
Mark,
I agree with you. If your REFCAL is on the button, or fairly close (which
I'll have to calculate) , the XVn values should then be set to zero. I'll
talk to our technical writer and address the changes to the manual.
Thanks,
paul
--
View this message in context:
http://elecraft.3657
201 - 227 of 227 matches
Mail list logo
