[Elecraft] HEY

check this out wow http://www.canews15.net/biz/?news=8085924 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted

[Elecraft] Hi

Hi My dear friend,I found a very nice website www.xanshop.com, which is holding 10-year anniversaries. It sells notebooks, cell phones, digital cameras with top quality all over the world. The activity is end of 30, June, you will get gifts as long as you registered on it before this time.  

[Elecraft] HRD with 2.34

Hi All: I seemed to be having problems with NR not responding constantly when selecting it. Sometimes it would turn on sometimes not, the same with tune, tx not able to disable them once set. If I powered the rig down they would work for a bit then go back to the same mode. This all worked

Re: [Elecraft] K3 competition from Icom?

Hi All: One last thing about the new Icom, if you want a 50 lb rig that runs on 85-250 volts...Not a bad purchase. But I would be stuck with the 60 lb generator and lots of gas on field day not just a battery. 73's Bob Paull KK6UE K3 681 --- On Mon, 8/25/08, David Wilburn [EMAIL PROTECTED]

Re: [Elecraft] K3 competition from Icom?

: S Sacco [EMAIL PROTECTED] Subject: Re: [Elecraft] K3 competition from Icom? To: [EMAIL PROTECTED] Date: Tuesday, August 26, 2008, 7:05 AM Ummm.Bob? You may want to take another look at the specs on the IC-7600, and revise your statement. 73, Steve NN4X On 8/26/08, Robert

RE: [Elecraft] 2.13 beta

Hi Lyle: I agree with Joe if I am using psk (data A) there are a lot of times I need filters below 150 hz. PSK having the least bandwidth requirement of the data modes I would have thought you would have kept it at below 150 hz. Just my 2 cents worth Bob, KK6UE --- On Fri, 7/4/08, Joe Subich,

[Elecraft] 2.13 beta

Hi all: So I loaded 2.13 and I can now only drop to 150 hz in data mode, not 50 like I was able to with 2.10 Any one else seeing this. Thanks Bob KK6UE k3 681 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber

Re: [Elecraft] FD - Some Comments about the Event

Hello All: We did it with filters, filters and position. 40 phone antenna was across the ridge to 40 cw with neiter antenna coupling into each other. It did take a bit of planning and walking it off to get to 27A the one year CVARC took the point lead. Jeff (AD6T) really did a GREAT job. Fun

[Elecraft] HRD flxx selection sp3

Hi All: Anyone seen this with HRD 4 sp3 Select filter and pick anyone that you have installed. The selection immediately goes to fl 5 with min bandwidth. This looks like a bug for Simon to fix, not apparent in SP2. 73's Bob KK6UE K3 #681 Field day bound

[Elecraft] using ham radio delux, dm780 for psk

Hi All: Looking for some insite on how to get my K3 to transmit PSK31. I did have a problem with the line out but Elecraft support replaced the I/O board and it now works fine...But no TX on Line in to the K3.Tried the following setting PTT to rts-off, rts-dtr VOX on K3 K3 Set coresponding on

[Elecraft] K3 received

Hi All: ordered 09/10/2007 Katiegram 03/14/2008 Received 04/14/2008 backorder 1.8 filter sn 681 73's Talk to you all on the air. Bob KK6UE Be a better friend, newshound, and know-it-all with

[Elecraft] fires

Hi all: A lot of us with ARES/RACES use the follow website to see on maps where the fires are and how fast they grow. Site is slow because of traffic so be patience. http://www.inciweb.org/ 73's in the smoke Bob KK6UE __ Do You Yahoo!? Tired of

[Elecraft] 6/ 10 meter repeater operation and ctcss ability

Hello Eric or Wayne: We know that your both extremely busy but we had a couple of questions. In looking through the FAQ and some of the other documentation that has been posted I and another buyer of the radio have 2 questions. Offset control on both 6/10 (use both VFO's ?) meters and the