Re: [Elecraft] Advice on K3 versus KX3

gt; This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to ae4rm@gmail.com > -- Roger Meadows AE4RM __ Elecraft mailing list Home: http://mailman.qth.net

[Elecraft] KXPD2 For Sale

Just bought a new portable paddle and not using my KXPD2 anymore. Only used a few times in the field. Will sell for $95. Includes shipping within the CONUS via USPS. Contact romead...@icloud.com for more info. 73, Roger

Re: [Elecraft] [KX3] CW Splatter?

If it drops substantially, that might be one > possible cause for that behavior. > > 73, > Don W3FPR > > On 5/8/2018 5:55 PM, Roger Meadows rmeadows0...@yahoo.com [KX3] wrote: >> I was informed via e-mail by a fellow ham that my CW signal from my KX3 was >> splattering about

[Elecraft] CW Splatter?

I was informed via e-mail by a fellow ham that my CW signal from my KX3 was splattering about 11k. Although this is the only report I have even received like this, and may be an issue on the other side, it still does concern me. I do not have another radio where I could transmit into a dummy

[Elecraft] Strange PX3 issue

Recently, my PX3 has started showing signals adjacent to the one I am listening to, both to the left and right. I went ahead and did the sideband nulling with no issues but the problem was still there. I then turned down the volume and found that the adjacent signals went aways. Raise the

[Elecraft] KX3 SWR Meter vs MFJ

I decided to do a spot check on SWR readings on my antenna with my KX3 after I tuned it with a MFJ 259C. The results were different between the two devices.  The MFJ on the lower bands read a significantly higher SWR than the KX3.   I guess my question is which would you trust, the MFJ or the

[Elecraft] K2 For Sale

I'm selling my K2. Has the following installed: KAT2 - Automatic Antenna Tuner KIO2 - AUX I/O Module (with serial cable for CAT control) KSB2 - Single Side Band K160RX - 160m and 2nd Antenna Option KNB2 - Noise Blanker KAF2 - audio filter and real-time clock (clock needs a battery) Kenwood

[Elecraft] K2 For Sale

Mic This K2 was aligned and fully upgraded with all the upgrade kits to the latest level by Don Wihelm (W3FPR) the end of August. I'm asking $750 shipped in the CONUS, PayPal. Pictures sent on request. Contact me at AE4RM at AE4RM.com -- 73, Roger Meadows AE4RM

[Elecraft] KXPA100 w/ATU for sale

I'm selling my 2 month old KXPA100 with ATU and cable kit. I don't use it and operate QRP so it's an expensive antenna switch right now. Contact me off list for details. Ae4rm@arrl dot net -- 73, Roger Meadows AE4RM __ Elecraft mailing

Re: [Elecraft] Update on KXPD2 and KXPD3 paddles

How do we tell if our current KXPD2 is up to the current configuration? Roger AE4RM > On Sep 1, 2017, at 4:31 PM, Wayne Burdick wrote: > > I have to apologize for stating that there were mod kits available for the > KXPD2 and KXPD3 that reflect improvements we’ve made over

[Elecraft] KX3 generating signal

and the noise went away. When I tuned back to where he was, it came back. We could only hear it on his radio but my KX3 was definitely generating the signal. This was on 40m around 7020. What would cause this? It does not seem normal. -- 73, Roger Meadows AE4RM

[Elecraft] PX3 Lag

oger AE4RM Lakeland, FL -- 73, Roger Meadows AE4RM __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.

Re: [Elecraft] PX3 Signal While Transmitting

freezes the PX3 all the time you are transmitting in semi break > in, the other doesn't. > > The other thing that sometimes causes spurious signals to appear on the > PX3 is if the PX3 NB level is too high (not the KX3 NB level). > > 73 from David GM4JJJ > > > On 3 Aug 2017

[Elecraft] PX3 Signal While Transmitting

When I'm sending code, I noticed that there is a signal showing up just to the right of the frequency I'm on. It goes away when I'm done transmitting. Here is an example ... https://youtu.be/zQ_VWCmKvOw Thanks for your input. 73, Roger Meadows AE4RM

Re: [Elecraft] Maintaining Sanity with Gmail Filters

If there was a like button, I'd press it. Sent from my iPhone > On Jul 29, 2017, at 5:56 PM, Kevin der Kinderen wrote: > > For those with Gmail, the only way I have found to reduce the amount of > reflector emails that don't interest me is to set up a filter. > > The way

Re: [Elecraft] PX3 Problem?

Sounds like a ground loop. I had something similar. I unplugged the KX3 from the computer and it went away. I was able to use an USB hub and it was fine. -- 73 and Thanks, Roger Meadows AE4RM QRP - Do More With Less On July 16, 2017 at 6:06:20 PM, Dave Sublette (k...@arrl.net<mailt

Re: [Elecraft] KX3/P3 external power source

What would you recommend setting the shutoff voltage of a KX3 when using a LiFePo4 battery? Sent from Mail for Windows 10 From: Bob N3MNT Sent: Thursday, June 8, 2017 09:02 To:

Re: [Elecraft] K3 Display is Dated...

When I worked in industrial automation the graphics on the control stations displays were getting fancier and fancier. The fancier they got, the more cluttered than got. Then, the industry as a whole started noting that more accidents were happening and missed alarms. They, because the displays

[Elecraft] Macro Question

I have two macros. One to turn off MICBIAS and MIC BTN. The second to turn MICBIAS back on and set MIC BTN to Ptt UP.dn. The first one works fine: MN135;MP000;MN082;MP000;SWT09; MN135 sets MICBIAS off and MN082 sets MIC BTN off. SWT09 exits the menu When I go to set them back I use:

Re: [Elecraft] Linear thoughts

I’ll be one of the first in line to buy one of the trade ins….. On Mar 17, 2017, at 6:09 PM, Bill Johnson > wrote: I echo that or, offer a combiner second KPA500 to add to the existing! I cannot safely lift over 40 lbs. but I can lift that twice! Just

Re: [Elecraft] Augment KX3 or buy K3?

I don’t have any money to spend, but thinking of selling a rig to put towards the PX3 and KXPA100. Thats the way I’d go. > On Mar 7, 2017, at 3:54 PM, Gareth - M5KVK wrote: > > Hi all > I am in the fortunate position of having some money to spend upgrading my > station;