http://www.pttpro.com/switches.htm
Picked one up for Field Day. Some folks didn't like using a foot
switch, and too much noise QRM for VOX.
Looks like the price went up a bit since I ordered mine.
Ron, WD4AHZ
__
Elecraft mailing
Setting up N3FJP 4.7 for Field Day in a couple weeks.
We'll be using K3s, and am trying to get the software to fire off the M1
- M4 voice messages with the Function Keys.
I've got it working with N1MM using the
{CAT1ASC SWT21;} etc commands.
I thought I had it working at one time with
Just poked around on the N3FJP Group, and found a couple messages there
... N3FJP doesn't have a CAT command function. Guess that takes care of
that.
Ron
__
Elecraft mailing list
Home:
On 9/20/2014 4:24 AM, Michael Eberle wrote:
From the FW REVS screen, if rotate the VFO A knob clockwise a little,
it should change to something like d1 02.83 which is the DSP firmware
revision. I am curious if it will do this, but not change the frequency
when you exit the menu.
No, turning
On 9/20/2014 8:36 AM, Ron Wetjen wrote:
Will try to take a look at the encoders later today and double check to
see that they are installed correctly.
Disassembled the front panel ... and reinstalled the encoders. That
corrected the problem. Both VFO's are working now.
On to the setup
Finished building my brand new K3 earlier today and am now at the Test
and Calibration point in the manual.
Radio powers up OK.
When I go into CONFIG the display reads
uC 04.86
FW REV5
Turning VFO B doesn't change the display (and turning VFO A doesn't
change the frequency).
Checked to
6 matches
Mail list logo