I wish to thank all who help us on resolving the trouble of setting
K3, MK2 and the combo N1MM/MMTTY.
Joe was right: no way to have a Realtek based driver for sound doing
just the task of managing Windows sounds.
At moment we put at work the macros sent directly to K3 to trigger
the sound messa
ery
>time a software writer makes a minor screen change. It is total
>waste of time when the change does not apply to the interface.
>
>73,
>
>... Joe, W4TV
>
>
>On 11/16/2011 10:14 AM, Sante - IK0HBN wrote:
>>Thank you Joe,
>>I suspected this..
>>Th
SK requires an on/off keying (shift) signal connected to the
>proper pin on the ACC (DB15HD) connector.
>
>73,
>
> ... Joe, W4TV
>
>
>On 11/16/2011 6:36 AM, Sante - IK0HBN wrote:
>>Hi All,
>>one of my friend have given several days ago the duty of setting his
>
Hi All,
one of my friend have given several days ago the duty of setting his
K3 with N1MM and MMTTY. Surely it's a good start for me with this
radio, but as at moment I'm not an owner of such a cake, I need your help.
Purpose: Using K3 with a single True Serial cable to manage FSK, CW
and trigg
tuning circuit, but
>once you have tuned the external circuit inside any one band, you
>can use the KX1 internal tuner as you move around in the band.
>
>73,
>Don W3FPR
>
>On 7/10/2011 5:21 PM, Sante - IK0HBN wrote:
>>Hi all,
>>there is a plenty of schematic about End
Hi all,
there is a plenty of schematic about End Fed Half Wave antenna, but
all them are within the range 40-10 meter. Is there one of you who
was able to run it with a KX1 in the range 80-20 meter? The idea of
getting a wire hanged somewhere, without long radials if not a 2-3
meters counterpoi
Hi John,
go and visit the review of MFJ-4103 at eham.net and you will discover
that such a power supply generates a lot of noise into RX...
Hope this help.
Ciao
Sante
owner of an economic wall wart with a light mod (just adding a 7812
regulator).
That did the trick for my kx1, but choice a power
Hi Eric,
as an avid sea kayaker, during my summer holidays I use frequently my
KX1, but I never tried it when paddling at sea. It's almost quite
difficult to manage a full loaded kayak with all the stuffs needed
for a couples of weeks than adding even the task of using a radio.
My experience bri
Hi all,
Tomorrow and Sunday I'll be QRV from GIGLIO ISLAND (EU-028 - GR-002)
with my trustee KX1 during my sea kayak trip all around the island.
I'll be qrv mainly when landing at evening on all the bands KX1
allows (20-30-40-80)
Callsign will be:
IA5/IK0HBN/QRP
Copy all you
Ciao
Sante
ps. All
Hi all,
I will be QRV starting from tomorrow with a KX1 within my spare time
from paddling a sea kayak along the Italian coasts in Calabria and
Puglia. I'll use my home callsign /I8 and /I7. That will realize my
dream of joining HamRadio and seakayaking doing free nautical
camping. Power will b
The comments on Eham.net are very bad, due to the noise and hash that
PS develops (MFJ-4103).
Hope this help.
Sante
At 03.33 28/01/2009, you wrote:
>On Jan 27, 2009, at 4:41 PM, dbellw...@aol.com wrote:
>
> > I'm looking for a very small, lightweight 110/220 supply for the
> > KX-1. Suggestion
Hi Paul,
I had the same problems few days ago. I had even 30/80 option
installed and the power was more and less the same of yours.
The manual suggests to enlarg the "green wire only" at L2, but it was
unsuccessfully. I asked to a friend of mine who reduced the Green
wire at L2 by one turn and
h 33 ft of counterpoise.
CUL es thanks agn.
Sante, IK0HBN
At 03.21 06/08/2008, you wrote:
Sante,
Although you may be able to load a small antenna on 80 meters, the
efficiency will diminish as the antenna gets physically smaller (one
cannot defeat the laws of physics).
I would suggest that you c
en on 80 mtrs? I'd like
to have just one wire for backpacking"
Thanks in advance
Sante, IK0HBN
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, un
14 matches
Mail list logo