Dean, running the driver "flat out" or indeed the PA at full power creates a high level of 3rd order IMD. If you run the K3 around 1/4 power the IMD on SSB transmit reduces by around 10 dB. It's not that the K3 is particularly bad in this regard, almost all 12 Volt PA transceivers are like it. My recommendation would be to opt for the 100 Watt PA and run into your linear at 15 ~ 25 Watts or so.
73 Dave, G4AON K3/100 #80 =============== I presently have a K2 with 15 to 17 watts out. When I need QRO it runs my AL-811H amp up to a few hundred watts so I have never needed the 100 watt finals. I am thinking that I will be able to do the same thing with the K3 as long as it has about the same output. For those with the 10 watt model, it would be helpful to know what your actual power out is. Thanks! Dean ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html