Wed Feb 25 13:45:20 EST 2009 wayne burdick n6kr wrote ...
... We have a new field-test firmware revision available that offers a
significant improvement in such situations by reducing the IMD caused by
conventional AGC.
--
Wayne,
I just received #2724 yesterday and am still inventorying
On Thu Mar 27 2008 at 15:11:50 Bruce Bennett (K2pdj) wrote ...
Seems I recall that a provision for operating a
keyboard directly with the k3 would happen. No
computer necessary. Was I correct?
--
Bruce,
Eric indicated off Reflector that the FAQ was incorrect. He has since
removed that
Thanks Steve. It's http://www.unpcbs.com/ rather than www/ ... sorry!
Steve Stutman [EMAIL PROTECTED] wrote:
Hi,
Link to:
http://www/unpcbs.com/
points to Yahoo?
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a
Thu Jan 17 17:54:46 EST 2008 John Hoaglun (NG0R) wrote ...
... I know that some people have used some sort of
inexpensive kit to allow [..] for the future upgrade path.
Are there any opinions one way or the other on that? My main concern
being any parts that I might need to desolder in the
Jimmy Lee (AE4DT) wrote ...
when I adjust the power to 5 watts I will get from 3 to 6 watts (varies
with the band)
--
Jimmy,
See http://www.elecraft.com/Apps/Power_Control_Mod.html
73,
Gary KI4GGX
___
Elecraft mailing list
Post to:
Paul N4LCD wrote ...
I went to Inrad's site and searched on 8215 and got 13 8-pole
filters, but no 5-poles. Then I searched on just 5-pole with no results.
--
Paul,
I got the impression that the other filters were made by Elecraft. If you
look at Craig Rairdin's, (NZ0R) K3 assembly
Chris wrote ...
I bought my K2 on the used market and I realized that the previous owner had
removed the Noise Blanker and W5, R88,R89 and R90 were not reinstalled. Does
this affect rx performance? Should I install these parts again?
--
Chris,
Is there an un-module header in place of
Brian (GM3AKF) writes ...
Why when I remove the KDSP2 does the audio disappear?
Brian,
Referring to the upper right corner of this diagram ...
http://www.unpcbs.com/common/images/diagram_large.png
the audio chain in a stock K2 is routed through jumper wires CTRL-R18 and R19.
However,
Raj Wrote ...
I don't like de-soldering! Any suggestions, ideas are welcome.
Raj:
You will find a link to our website via the Rework Eliminator(TM)
Option Bypass Headers (Un-Modules) link at the bottom of Elecraft's
homepage. Or, the direct path is http://www.unpcbs.com/
There's lots of
Eric Wrote:
I'm putting off some bench work on my K2 until I get a set. Not
really,
but it will sure be a lot more convenient when I get mine. One less
reason to procrastinate over digging into it.
Eric
KE6US
Hi Eric,
You've hit on something that's been on my mind all along. I wonder
10 matches
Mail list logo