My k3 (427) goes into the transmit state when I connect the cable from the Kpa
500 . This has never happend before .
I have downloaded recent firmware for k3/kpa500/ ,disconnected p3 ,to try and
correct issue and still the same .
Screen shows PTT err . Config set at - Ptt off-off . Any
My k3 (427) goes into the transmit state when I connect the cable from the Kpa
500 . This has never happend before .
I have downloaded recent firmware for k3/kpa500/ ,disconnected p3 ,to try and
correct issue and still the same .
Screen shows PTT err . Config set at - Ptt off-off . Any
My K3 Lcd tx continues to blink as if in the test state ;and am unable to
transmit. This has been happening for a while and usually stops after 15
minutes or so. Today it has not .Radio has been on for several hrs. I have the
latest firmware installed. K3 #427,with atu and kpa 100 installed.
LinkedIn
mark crossland requested to add you as a connection on LinkedIn:
--
Robert,
I'd like to add you to my professional network on LinkedIn.
- mark
Accept invitation from mark crossland
http://www.linkedin.com/e/sn8jl7
j...@n6gq.com
Hi Jeff , this exact behavior happen with my K3 #427 2 months ago
the fix for mine was to force a re -download of latest firmware and that solved
the problem. Good luck Mark W1VJ
Regards,
Mark Crossland
Crossland Landscape Inc.
508 693 bus.
508 693 7888 fax
j...@n6gq.com
Jeff, remove the rs232 board and clean it gently with water and toothbrush .
let dry and reinstall . that should get you back up and running
Mark W1VJ
K3 # 427
__
Elecraft mailing list
Home:
Good Morning, My K3 will not come out of the mcu ld state and will not load the
latest firmware. I have removed the power ,loaded the latest utility, and tried
several times to load firmware,but to no avail. I reconnected the power and it
is still locked in mcu ld. Any suggestions ?
Thanks
My K3 turns back on after pushing power button to turn it off. have added the
diode to the fan assembly mod to no avail..any suggestions?
Mark
W1VJ
K3- 427
P3 -434
__
Elecraft mailing list
Home:
My K3 turns itself back on after 5 seconds or so after shutoff. Faultly power
button ? any suggestions Mark -W1VJ k3 427
Regards,
Mark Crossland
Crossland Landscape Inc.
508 693 bus.
508 693 7888 fax.
508 802 8296
crosslandlandscape.com
Regards,
Mark Crossland
Crossland Landscape Inc.
508 693 bus.
508 693 7888 fax.
508 802 8296
crosslandlandscape.com
--- On Sat, 2/27/10, bernie crossland ppfar...@yahoo.com wrote:
From: bernie crossland ppfar...@yahoo.com
Subject: FW: Thought of the day
To: lee alwardt lalwa
I did not intend to cc this joke to the reflector--apologizes W1VJ
Regards,
Mark Crossland
Crossland Landscape Inc.
508 693 bus.
508 693 7888 fax.
508 802 8296
crosslandlandscape.com
__
Elecraft mailing list
Home: http
When using my new tentec 707 mic with kenwood cable ,My k3 transmits
normally,but there is no reading on the meter . any input on this. Thanks Mark
- W1VJ
Regards,
Mark W. Crossland
508 693
508 693 7888(fax)
www.crosslandlandscape.com
Elecraft, how would I go about changing a call sign into the k3 ? I have
recently downloaded the latest software (beta) dated 10/23/09 and can no
longer find config.banner in the menu's k3 427 Mark --WIVJ
Regards,
Mark W. Crossland
508 693
508 693
Please help., I've just downloaded the latest
firmware and now my receiver is without any signal on
any band
Mark N1rfb
K3--427
Be a better friend, newshound, and
know-it-all with Yahoo! Mobile. Try it
A follow up on firmware download, VFO 'A' reads
FPF LOAD-
VFO 'B' reads PENDING
Mark N1rfb
Be a better friend, newshound, and
know-it-all with Yahoo! Mobile. Try it now.
K3#247 kit arrived 2/13 and on air2/14. top of the
line. thanks elecraft Mark N1rfb
k2 6000 series
k3 247
pro 3
Never miss a thing. Make Yahoo your home page.
http://www.yahoo.com/r/hs
k3 #427 arrived 2/13/on air 2/14 top of the line .
thanks elecraft Mark--N1rfb
series 6000
k3 427
pro 3
Be a better friend, newshound, and
know-it-all with Yahoo! Mobile. Try it now.
17 matches
Mail list logo