[Elecraft] Z10000 installatoin in K2

meter board, figured I would use it rather than drilling more holes in the back panel. I wanted to make sure I wasn't missing something so thought I would see what the pro's think before proceeding. Thanks and have a great weekend: Jerry N0JRN

Re: [Elecraft] Z10000 installatoin in K2

Thanks guys: I appreciate very much your response. I have every option available in my K2 Jack and I really didn't want to drill another hole in the back panel. I understand the need to keep any stray signals out of this circuit and figured that's why you elected to use the SMA. I just

Re: [Elecraft] XV50 heating report.

current info within 3 minutes 24/7. 73 to all : JerryN0JRN Hello Don, Thanks a lot for your effort and the informative report. I agree with you that the PA module should survive under the test condition. However, I am not sure whether such a continuous high working

[Elecraft] LP Pan K2

Anybody running LP Pan with your K2??? IF so, what do you think of it I'm considering adding it to the shack and wanted some opinions before purchasing. Thanks 73: Jerry N0JRN __ Elecraft mailing list Home

[Elecraft] K2REMOTE ?

the group and see what I'm missing. Thanks to all and have a great day: 73 Jerry N0JRN __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post

Re: [Elecraft] XV50 cooling

N0JRN On 6/3/2010 1:18:45 PM, Eric (gliderboy1...@yahoo.com) wrote: I have a late-model xv144 with holes in both top and bottom panels, connected to k3 with milliwatt drive. It runs excessively hot at 10w out __ Elecraft mailing list

[Elecraft] XV50 Cooling

available that are pre-drilled ?? ( I don't see then in the products list ) Just curious ! 73 JerryN0JRN __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net

Re: [Elecraft] XV50 Cooling

again Don and have a great day. 73 Jerry N0JRN On 6/2/2010 10:36:44 AM, Don Wilhelm (w3...@embarqmail.com) wrote: Jerry, There are holes in the top cover that are supposed to be positioned above the attenuator resistors, and the new transverters have holes on the bottom

[Elecraft] XV50 going into Overload

builders alert. That didn't help this issue. Doesn't matter which mode I'm running. Still does it ! I am running vox when in SSB. Anyway, just curious if anyone has any pointers. Thanks and 73:JerryN0JRN

Re: [Elecraft] My feelings

As if it's your duty to do that NOT I didn't realize your name was ERIC NOT So it wasn't up to you to point anything out !Was it ? IF there is a lesson to be learned here, open your eyes and realize it's you that should be learning. 73 JerryN0JRN On 4/19

Re: [Elecraft] k2 pll and ref osc issues n0xdb WTF

You probably should have stuck to your Cobra 29 As for getting help on the weekends...NOT without Don ! Have a great day:Jerry N0JRN On 4/18/2010 12:47:20 PM, Foxjazz (fo...@foxjazz.net) wrote: All Sorry I caused a ruckus. I understand where everyone comes

[Elecraft] Need Resistors

to pay someone for your cost. Please contact me off the list. Thanks and 73: JerryN0JRN __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post

[Elecraft] PC generated CW K2

??? OR tell me how to rig this up ??? I would like to keep my paddles hooked up at the same time. Thanks and 73 Jerry N0JRN __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http

[Elecraft] K2 computer interface

tell me what your using to send CW from you PC. Thanks and have a great day. 73 Jerry N0JRN __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm

[Elecraft] Another curiosity

Just wondering if I need to switch my internal tuner to something other than AUTOin the menus when I'm on 6 meters. I'm using the XV60 and driving it with the K60XV. As I understand, the internal tuner is actually disabled when I go the TRN1 / 6 mtrs and will not attempt to

Re: [Elecraft] I'm having a bad day.

is the order of the day. However, there are a great many other issues required to put one of these rigs on the air with a really good signal, maximum performance and ( lord help me ) computer control. All things being equal ! 73 Jerry N0JRN On 2/15/2010 1:09:31 PM, Ken Kopp (k

[Elecraft] Isolation Transformer

What kind of isolation transformer are you using and why did you choose the one you have ??? Just curious 73JerryN0JRN __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http

[Elecraft] My latest Curiousity

I see Function generators all over the auction sites. I understand their purpose is to produce certain wave forms at different freq's etc. SO, how does that relate to tuning of or testing out radio's How does a Function function ?? Thanks and have a super evening: Jerry N0JRN

[Elecraft] Signal Generator

?? Could you tell me the pro's and con's Thanks and have a great day: 73 Jerry N0JRN __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post

Re: [Elecraft] Signal / RF generator

with a small footprint, good attenuation, good coverage up to about 150 Megs, great stability all for around $100.00 ( or less ) Kind of sounds like a TV commercial I've seen lately. LOL Again, thanks to all: 73 JerryN0JRN Hi Jerry: Around here, the 'choice' seems

[Elecraft] IT IS ALIVE

shack. That will be an XV144 QRV from 160 to 144 including 60 with one rig... Priceless ! 73 all Jerry N0JRN __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http

[Elecraft] Signal / RF generator

a signal / RF generator, what brand, model and options are you using ??? Was there a reason you choice the unit you have over some other Just curious 73 Jerry N0JRN __ Elecraft mailing list Home: http

[Elecraft] Still confused but working through it.

transverters. Command signals are via the AUX BUS and course the antenna hooks to the transverter J1. YES / NO ?? any suggestions ?? Thanks and 73:Jerry N0JRN __ Elecraft mailing list Home: http

[Elecraft] Fw: K2 PA repair kit

what gives. Thanks to all for your suggestions / help: 72Jerry N0JRN The K60XV should not reduce the base voltage at Q7 and Q8. BUT, since it is, remove the K60XV, put a jumper wire from pin 3 to pin 5 on J13 and stick the leads of a small value capacitor (4.7 pF is ideal

[Elecraft] K2 PA repair kit

but wanted to be sure before proceeding. IF that's the case, is it installed as a jumper between the base of Q7 Q8 ??? Thanks and enjoy the game: ( if your a football fan ) 73 Jerry N0JRN __ Elecraft mailing list

[Elecraft] Fw: K2 PA repair kit

- Original Message - From: n0jrn n0...@mchsi.com To: d...@w3fpr.com Sent: Sunday, January 24, 2010 7:53 PM Subject: Re: [Elecraft] K2 PA repair kit Thanks Don and all: R50 is already a 1/2 watt and is in good shape. I do have good desoldering equipment and now have Q7, Q8, Q11

Re: [Elecraft] K2 PA repair kit

Don: Should I have the K60XV plugged in while testing the base voltages at Q7 and Q8 ?? Maybe I should ask Should have the K60XV affect the base voltage of Q7 and Q8??? I have .64 volts at the base of both transistors without the K60XV. Plug the K60XV in and it drops the voltage to .40 at

Re: [Elecraft] Heil HC-5 K2

Along this line ! Does the K2 have a monitor circuit built in or does one need a separate receiver to check clarity ??? I find no reference to monitoring the transmitting voice in the K2 manual but wanted ask anyway. 72 Jerry N0JRN On 1/19/2010 10:01:29 AM, W0MU Mike

[Elecraft] Anything else in TX

. I did recheck the I/O for the board and that was good. OH Well ! One thing at a time ! 72 Jerry N0JRN __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net

Re: [Elecraft] Anything else in TX

Don: A little more explanation is in order. I have the cover off the K2. XV50 is not connected at this time. K60XV board is still plugged in. I now have Ant 1 of the KAT2 hooked to my dummy load with watt meter in series. Checking voltages at Q7 and Q8 reveal the collector voltage on both

[Elecraft] Connecting to XV50

but the connections between the K2 and transverter is troubling. Is this as simple as hooking the K60xv in out to the transverters TXin / RXout Thanks and 73: Jerry N0JRN __ Elecraft mailing list Home: http

[Elecraft] XV50 resistors

N0JRN __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email

Re: [Elecraft] Checking KPA relays

N0JRN __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list

[Elecraft] Fw: Checking KPA relays

TO THE KISS RULE 73 Jerry N0JRN On 12/20/2009 7:39:08 PM, Tom Hammond (n...@embarqmail.com) wrote: Jerry: What are you using for a power supply? Brand ratings? Metered? __ Elecraft mailing list Home: http

[Elecraft] Checking KPA relays

if the relays are working. Thanks and 73 Jerry N0JRN __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted

Re: [Elecraft] Checking KPA relays

Thanks Don: Easy enough ! I appreciate that very much. Yes I am working with my KPA100. I'm looking for why the K2 drops out of TX when I try to adjust output above 35 watts. A couple of the bands are also showing excessive current draw and high reflected. Just wanted to check the

Re: [Elecraft] KPA100 problem / Update

Now to move on to the next challenge. Thanks to everybody for your suggestions and support. 73JerryN0JRN - Original Message - From: Don Wilhelm d...@w3fpr.com To: n0jrn n0...@mchsi.com Sent: Monday, December 14, 2009 6:22 AM Subject: Re: [Elecraft] KPA100 problem

[Elecraft] KPA100 another issue

Jerry N0JRN ( BTW, my ISP is also acting up and it's taking several hours for my posts to show up on the reflector ) Back to 40 meters and tried to __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo

Re: [Elecraft] KPA100 problem

there. Now to call Mouser and get another MAX1406 on the way Thanks guys and I'll keep you up on how things work out. 72JerryN0JRN On 12/14/2009 6:22:37 AM, Don Wilhelm (d...@w3fpr.com) wrote: Jerry, I will take back what I said about U4 - it is faulty

Re: [Elecraft] KPA100 problem

for damaging this chip ??? I have 2 new chips coming from Mouser. I'm not installing them until I'm satisfied that I've checked and double checked EVERYTHING involved. Thanks again and happy holidays to the group: 72 Jerry N0JRN - Original Message - From: Don

[Elecraft] KPA100 problem

appreciated. Thanks 72: Jerry N0JRN __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http

[Elecraft] Test: Please ignore

Thanks and 73: __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support

[Elecraft] KPA100

: Jerry N0JRN __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help

[Elecraft] K2 Denoiser

it compliments the pitch setting in my filters. Thanks and 72: JerryN0JRN __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft

[Elecraft] K2 High Current

N0JRN __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email

[Elecraft] Looking for an XV50

Prefer unbuilt if you have one that sitten around drawing dust. Please e-mail direct ! Thanks and 73: JerryN0JRN __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http

Re: [Elecraft] [fpqrp] RFTB ???

Is there a RFTB tonite ??? Thanks !!! George , N2JNZ FP 344 YUPand I'll be there with bells and whistles on !!! It'll look like Santa only I'll have Flyen Piggies leading the sleigh. CU all there __ Elecraft mailing list

[Elecraft] KPA100 speaker

Hey gang: When installing the KPA100 in an EC2 enclosure, should I install the speaker ??? Not sure if hooking up the KPA100 / KAT100 in the EC2 will mute the speaker in the rig Just curious 73 JerryN0JRN

[Elecraft] Adding 6 meters

Hey gang: I have my KAT100 and KPA100 in a separate EC2 enclosure. I considering adding the XV50 to this package. Has anyone done this and can you tell me if all units can be interfaced at the same time Just curious ! Thanks and 73: JerryN0JRN

Re: [Elecraft] Adding 6 meters

for the KAT100 shown in that figure. 73, Don W3FPR n0jrn wrote: Hey gang: I have my KAT100 and KPA100 in a separate EC2 enclosure. I considering adding the XV50 to this package. Has anyone done this and can you tell me if all units can be interfaced at the same time Just

[Elecraft] Where Dem Piggies ?

some noise and see if you can hear my peanut whistle. IF all else fails,I'll drive by Brian's and give a holler on 27.185 O Oink Ya'll come now ye heeear 72 Jerry N0JRN ___ Elecraft mailing list Post to: Elecraft

[Elecraft] OK what contest is on now ?

I hear folks calling CQ Test but no idea what test their working. SO, what test is it and what is the exchange OO JerryN0JRN ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post

Re: [Elecraft] K2 SSB adapter problem

error corrected the problem. Check you schematic and check all the components related to T1 and T2.. YMMV but it's worth a look. 72 Jerry N0JRN On 4/13/2008 5:00:20 AM, Lennart ([EMAIL PROTECTED]) wrote: After I installed the K2 SSB adapter I get half

[Elecraft] K2 High Current Level

CUR and raised the current limit to 3.0 amps. Initial setting per the manual was 2.5 amps. Just wanted to be sure I wasn't going to burn the house down What cha think ?? 72 Jerry N0JRN ___ Elecraft mailing list Post

[Elecraft] K2 operation with internal battery

something. :-) Manuals say I can charge the internal battery from a power supply with the battery switch in either position. Just curious if I need to use caution while operating. Thanks and 72: Jerry N0JRN ___ Elecraft mailing list Post

[Elecraft] KPA100 initial tests

adjusted on the K2 to around 10 watts while doing these tests. Is it possible for the KPA100 to sense the power level of the rig and go into TX. Any thoughts?? Thanks and have a great weekend all 72 Jerry N0JRN ___ Elecraft mailing list

[Elecraft] PC control of the K2

? For those of you using PC control, how did you set it up? How are you feeding audio to the PC and back ?? Thanks 72 Jerry N0JRN ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post

[Elecraft] Spanner Wrench / socket ?

of tightening this type of nut thanks and 72 Jerry N0JRN ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman

[Elecraft] K2 with KDSP2

and whistles but my first impression isAWESOME 72JerryN0JRN ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http

[Elecraft] K2 SSB Power Problem REPAIRED

aren't doing what they should. As Don would say, go back and check all components, solders etc. and make sure you put them where they belong. :-) Now for the rest of the options. Everybody have a great weekend. 72 Jerry N0JRN

Re: [Elecraft] K2 SSB Power Problem REPAIRED

Nope, KSB2 kit had an extra 10K in it. I checked all others to insure there wasn't a second mistake. all is well. Jerry N0JRN On 3/8/2008 8:47:17 PM, Ken Kopp ([EMAIL PROTECTED]) wrote: Hi Jerry, Where did the 10K resistor you put in the wrong place -really

[Elecraft] Why no power from SSB

why it works on CW and not on SSB on the higher bands. I would obviously blame the SSB board and some mistake I might have made but there's nothing on the SSB board that is band specific Is there ??? Still digging :-) 72 Jerry N0JRN

[Elecraft] K2 SSB Low Power on some bands

and no power on SSB while CW if fine ) I'm guessing it's something I overlooked but it's been a long day. I'll dig into this tomorrow. Any ideas of what I missed would certainly be appreciated. Thanks and 72: Jerry N0JRN

[Elecraft] [fpqrp] Run For The Bacon - Sunday Night

OH YA Run For The Bacon ! I'll be on tonight running my newly finished K2 #6272 This will be it's maiden voyage... Would appreciate any reports on tone quality... Hope to see you all there.. 72 and OO Jerry N0JRN

[Elecraft] Fw: K2 and confused

think ?? Thanks and 73 JerryN0JRN ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft

[Elecraft] KAT100-1 conversion

see are the side panels needed. Does the conversion kit include the taller side panels ?? Thanks again and everyone have a great weekend. 73 Jerry N0JRN ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must

[Elecraft] K2 #6272

. Does some weird stuff when you do that. Anyway, it's cooken now . More later 72 JerryN0JRN ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr

[Elecraft] K2 RFC15?

are now likely to short to use for RFC15. So what say ye ole K2 guru's Do I pull it or let it run? thanks and 73 Jerry N0JRN ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post

[Elecraft] What is this stuff??

safe to use for radio ?? Just curious Thanks and 73 JerryN0JRN ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http

Fw: [Elecraft] What is this stuff??

PA0PJE - Oorspronkelijk bericht - Van: n0jrn [EMAIL PROTECTED] Aan: Elecraft elecraft@mailman.qth.net Verzonden: vrijdag 12 oktober 2007 15:22 Onderwerp: [Elecraft] What is this stuff?? Hey gang: A friend drop off some solder he didn't need. I'm having trouble identifying it so

[Elecraft] Run For The Bacon Sprint

es oo JerryN0JRN ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http

[Elecraft] Run that by me one more time:

satisfactory using 1.04D ?? What features will be gained by upgrading the firmware ?? Thanks gang: 72 Jerry N0JRN ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr

[Elecraft] Reveision Update?

Hey gang: I'm just finishing the build of a KAT2 for a friend. Manual says it takes 1.05 or better to gain all features of the tuner. My friend tells me he has 1.04D in his rig. My question: What feature will he not have using 1.04D ?? Thanks a bunch: JerryN0JRN