Re: [Elecraft] Replacement Manuals

https://elecraft.com/pages/manuals-downloads Free from the Elecraft web site. 73 de Bruce, N7TY Yuma, AZ www.qsl.net/n7ty -Original Message- From: elecraft-boun...@mailman.qth.net On Behalf Of Bill Frantz Sent: January 25, 2021 10:22 To: Richard Cc: Elecraft Reflector Subject: Re:

Re: [Elecraft] KPA1500 / K3 Mystery

YES, when switching the KPA1500 between OPER and STBY, the K3 displays the messages "KPA500 OPERATE" and "KPA500 STANDBY", depending. YES, the K3 is set CONFIG: POWER SET is Per Band. YES, when in STBY on the KPA1500, I set the "no amp" power to 100 watts, and when in OPER, I set drive

[Elecraft] KPA1500 / K3 Mystery

I made a recent change to the "Band Change-> STBY" setting on the KPA1500, changing from NO to YES. I did this to ensure the AMP doesn't have any wild SWR or PWR spikes before the ATU has a chance to "remember" it's setting after a band change. Issue: When switching the AMP from OPER to

Re: [Elecraft] Elecraft] KPA1500 Using Multiple Antennas With the Tuner

I will try that. 73 de Bruce, N7TY Yuma, AZ www.qsl.net/n7ty -Original Message- From: elecraft-boun...@mailman.qth.net On Behalf Of Jim McCook Sent: October 16, 2020 16:47 To: Elecraft Reflector Subject: Re: [Elecraft] Elecraft] KPA1500 Using Multiple Antennas With the Tuner Bruce,

Re: [Elecraft] KPA1500 Using Multiple Antennas With the Tuner

Jim, I have been following the thread. Same, same here. K3 driving the KPA1500, using AN1 jack only to a 6 PAK that is controlled by a Bandmaster V connected to the K3 for band data. I am going to try OPER / STBY trick when changing bands. 73 de Bruce, N7TY Yuma, AZ www.qsl.net/n7ty

Re: [Elecraft] Low Gain KPA1500

I had the same issue, had to send in to Elecraft. Download the faults file using the utility, and send to Elecraft Service, they will tell you what happened and what to do. 73 de Bruce, N7TY Yuma, AZ www.qsl.net/n7ty -Original Message- From: elecraft-boun...@mailman.qth.net On Behalf

[Elecraft] K3 For Sale (New Price!)

FOR SALE: Elecraft K3/100-F Includes: -KRX3 Sub-Receiver -KSYN3A Synthesizer Board upgrade (main & sub RX) -KAT3A 100W Automatic Antenna Tuner -KXV3B Transverter upgrade -KIO3B Interface upgrade -Filters (main RX) * KFLA3A-2.8-IR, 2.8 kHz SSB *KFLA3A-1.0-IR, 1.0 kHz CW/DATA

[Elecraft] K3 For Sale (Upgraded!)

FOR SALE: Elecraft K3/100-F Includes: -KRX3 Sub-Receiver -KSYN3A Synthesizer Board upgrade (main & sub RX) -KAT3A 100W Automatic Antenna Tuner -KXV3B Transverter upgrade -KIO3B Interface upgrade -Filters (main RX) * KFLA3A-2.8-IR, 2.8 kHz SSB *KFLA3A-1.0-IR, 1.0 kHz CW/DATA

[Elecraft] K3 For Sale (Upgraded!)

FOR SALE: Elecraft K3/100-F -KRX3 Sub-Receiver -KSYN3A Synthesizer Board upgrade (main & sub RX) -KAT3A 100W Automatic Antenna Tuner -KXV3B Transverter upgrade -KIO3B Interface upgrade -Filters (main RX) * KFLA3A-2.8-IR, 2.8 kHz SSB *KFLA3A-1.0-IR, 1.0 kHz CW/DATA *KFLA3C-400, 400 Hz

[Elecraft] K3 Items For Sale

I have some spares for the K3 available after recent upgrades. "Let's Make a Deal" 1x - KXV3A K3 Transverter Interface module 4x - KSYN3 K3 Synthesizer module If interested, let me know via direct email, n...@arrl.net 73 de Bruce, N7TY Yuma, AZ

[Elecraft] K3 Items For Sale

I have some spares for the K3 available after recent upgrades. "Let's Make a Deal" 1x - KXV3A K3 Transverter Interface module 4x - KSYN3 K3 Synthesizer module If interested, let me know via direct email, n...@arrl.net 73 de Bruce, N7TY Yuma, AZ

[Elecraft] K3/P3/KPA1500 Items For Sale

I have some Spares for the K3/P3/KPA1500. "Let's Make a Deal" 1x - KPA1500-KWD, KPA1500 to Kenwood Radio Interface Cable set 1x - KXV3A K3 Transverter Interface module 4x - KSYN3 K3 Synthesizer module 2x - E980297, RJ-45 to DE-9S (KIO3B RS232) Cable 1x - E850410, P3 Cable 1x - E850339,

[Elecraft] K3/P3/KPA1500 Items For Sale

I upgraded of my two K-Line's recently and have some left over items. "Let's Make a Deal" 1x - KPA1500-KWD, KPA1500 to Kenwood Radio Interface Cable set 1x - KXV3A K3 Transverter Interface module 4x - KSYN3 K3 Synthesizer module 1x - E850410, P3 Cable 1x - E850339, TMP Cable 2x - E980297,

Re: [Elecraft] Elecraft Service

Time Line as follows: Initial email contact: 4/17 Received an RSA: 4/22 Shipped to Elecraft: 4/23 Received at Elecraft: 4/27 Shipped from Elecraft: 5/26 Received at N7TY QTH: 6/2 It took them a month to perform the necessary repairs and upgrades, not bad considering. Also, the Amp was receive

[Elecraft] Elecraft Service

A few months back I won the ARRL Auction for a KPA1500. It was my understanding this was the one the League used to test for the QST review on the amplifier. It operated flawlessly for a few months, then I did something wrong after doing some work to my Vertical and it stopped putting out

[Elecraft] K3/P3/KAT500/KPA1500 Items For Sale

I upgraded of my two K-Line's recently and have some left over items 1x - KXV3A Transverter Interface 4x - KSYN3 synthesizer module 2x - E980297, RJ-45 to DE-9S (KIO3B RS232) Cable 1x - KXUSB Cable (w/ KAT500 power cord) 1x - E850824, KPA1500 PS Min Load Kit If interested, let me know

[Elecraft] K3/P3 Items For Sale

I upgraded of my two K3's & P3's recently and have some left over items 1x - KIO3A (3 board set) I/O interface 1x - KXV3A Transverter Interface 4x - KSYN3 synthesizer module 2x - E980297, RJ-45 TO DE-9S (KIO3B RS232) Cable 1x - KXUSB Cable (with KAT500 power cord) 1x - E850824, KPA1500 PS

[Elecraft] Spare K3 Parts For Sale

I upgraded of my two K3's recently and have left over parts.. If you have a legacy K3, and are interested in having some spares, here's your chance. 1x - KIO3A (3 board set) I/O interface 1x - KXV3A Transverter Interface 4x - KSYN3 synthesizer module If interested, let me know via

[Elecraft] FOR SALE: KPA500/KAT500 Combo (factory assembled)

Total value new: $3308.75 KPA500-F 500w Amplifier $2399.95 KAT500-F High-Power Auto-Tuner $769.95 KPAK3AUX (E850463) Enhanced Mode Cable (2ea) $39.95 E980262 KAT500 Power Cable $19.95 Fred Cady Book KE7X $39.00 KXUSB USB RS232 to 3.5mm Cable FREE Selling price for all the above: $2700 +

Re: [Elecraft] Comments from Special Forces personnel on KX2 use

As we Vets say, F**K'n-A! 73 de Bruce, N7TY Yuma, AZ www.qsl.net/n7ty -Original Message- From: elecraft-boun...@mailman.qth.net On Behalf Of Wayne Burdick Sent: 2 March, 2020 07:53 To: Elecraft Reflector Subject: [Elecraft] Comments from Special Forces personnel on KX2 use Hi all, I

[Elecraft] Spare K3 Parts For Sale

If anyone is looking for last minute Christmas gifts, I have some! I upgraded of my two K3's recently and have left over parts.. If you have a legacy K3, and are interested in having some spares, here's your chance. 1x - KIO3A (3 board set) I/O interface 1x - KXV3A Transverter

Re: [Elecraft] Installing a Sub Receiver

I have 4 of the old style KSYN3 synthesizer module if anyone is interested. Priced to sell! I also have: 1x - KIO3A (3 board set) I/O interface 1x - KXV3A Transverter Interface Email me off-line if interested. 73 de Bruce, N7TY Yuma, AZ www.qsl.net/n7ty -Original Message- From:

[Elecraft] Spare K3 Parts For Sale

I still have a few items remaining from the upgraded of my two K3. If you're interested in having some spares on hand for your legacy K3 or K3s as Elecraft moves to the K4, here's your chance. 1x - KIO3A (3 board set) I/O interface 1x - KXV3A Transverter Interface 4x - KSYN3

[Elecraft] K3 Parts For Sale

I recently upgraded of my two K3's. As such, I have a few left over parts for sale. Perhaps some of you own a K3; maybe you're interested in having some spares on hand. 4x - KSYN3 synthesizer module 1x - KXV3A Transverter Interface 1x - KIO3A (3 board set) I/O interface If

Re: [Elecraft] K3 Parts

I recently upgraded of my two K3's. As such, I have a few left over parts for sale. 4x - KSYN3 synthesizer module 1x - KXV3A Transverter Interface 1x - KIO3A (3 board set) I/O interface 1x - KFL3A-1.8, 1.8 kHz Roofing Filter If interested, let me know via direct email. "Let's Make a Deal"

Re: [Elecraft] [CADXA] K3 Parts For Sale

I recently upgraded of my two K3's. As such, I have a few left over parts for sale. Perhaps some of you own a K3; maybe you're interested in having some spares on hand. 4x - KSYN3 synthesizer module 1x - KXV3A Transverter Interface 1x - KIO3A (3 board set) I/O interface 1x -

[Elecraft] More K3 Parts For Sale

I have a few left over parts for sale that were removed as part of the upgrade of my two K3's. 4x - KSYN3 synthesizer module 2x - KXV3A Transverter Interface 1x - KIO3A (3 board set) I/O interface 1x - KFL3A-1.8, 1.8 kHz Roofing Filter If you are interested in purchasing any or all,

[Elecraft] K3 RS232 CW FSK PTT Interface

Recently upgraded my K3 and no longer need the W3YY RS232 CW/FSK/PTT interface. This is an excellent product but I no longer need due to upgrades. Wire and tested, photos available upon request. https://w3yy.com/fsk.htm If you are interested in purchasing, please email me directly at

[Elecraft] K3 Parts For Sale

I have a few parts that were removed from upgrade of my K3's. 1x - KIO3A (3 board set) I/O interface 1x - KXV3A Transverter Interface 1x - KFL3A-1.8, 1.8 kHz Roofing Filter 4x - KSYN3 synthesizer module If you are interested in purchasing any or all, please email me directly at

[Elecraft] K3 Parts For Sale

Still have a couple items left. I have a few spare parts I would like to sell. 2x - KSYN3 synthesizer module 1x - KFL3A-1.8, 1.8 kHz Roofing Filter If you are interested in purchasing any or all, please email me directly at n...@arrl.net for details. 73 de

Re: [Elecraft] K3 Parts For Sale

I recently purchased a used K3 and decided to upgrade it. I now have a few spare parts I would like to sell. 2x - KSYN3 synthesizer module 1x - KIO3A (3 board set) I/O interface 1x - KXV3A Transverter Interface 1x - KFL3A-500, 500 Hz CW/DATA Roofing Filter 2x - KFL3A-1.8, 1.8 kHz Roofing

[Elecraft] K3 Parts For Sale

I recently purchased a used K3 and decided to upgrade it. I now have a few spare parts I would like to sell. 2x - KSYN3 synthesizer module 1x - KIO3A (3 board set) I/O interface 1x - KXV3A Transverter Interface 2x - KFL3A-1.8, 1.8 kHz Roofing Filter 2x - KFL3A-500, 500 Hz CW/DATA Roofing

Re: [Elecraft] K3/K3s Roofing Filters

I still have the below for sale. 73 de Bruce, N7TY Yuma, AZ www.qsl.net/n7ty From: ockm...@gmail.com mailto:ockm...@gmail.com> > Sent: 28 November, 2019 10:27 To: Elecraft@mailman.qth.net Subject:

Re: [Elecraft] K3/K3s Roofing Filters

Update below. From: ockm...@gmail.com Sent: 28 November, 2019 10:27 To: Elecraft@mailman.qth.net Subject: K3/K3s Roofing Filters K3/K3s Users, I recently purchased a used K3, the previous owner was a Phone guy, I am not. I removed all the roofing filters he had installed and

Re: [Elecraft] K3/K3s Roofing Filters

I am aware, it is only needed in the main, which there is one. This is an extra. 73 de Bruce, N7TY Yuma, AZ www.qsl.net/n7ty -Original Message- From: Don Wilhelm Sent: 28 November, 2019 15:51 To: ockm...@gmail.com; Elecraft@mailman.qth.net Subject: Re: [Elecraft] K3/K3s Roofing

[Elecraft] K3/K3s Roofing Filters

K3/K3s Users, I recently purchased a used K3, the previous owner was a Phone guy, I am not. I removed all the roofing filters he had installed and installed ones that suite my operating habits. I now have several roofing filters that I won't use; they are for sale. 1x KFL3A-6K, 6kHz AM

[Elecraft] KPA1500 Display Color

I just purchased a KPA1500; I had been using a KPA500. It was "plug and play!" I disconnected the 500 and plugged in the 1500, updated the firmware and everything worked. Only have used for a day, but I already love it. One exception, the color of the display. It's light blue, as opposed