My K3 has been sold. Thank you for your inquiries.
Paul n6psepauln6...@gmail.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
K3/100 Radio Serial #5726 is in excellent condition, This has been my main
shack radio and has never been on a DXpedition.
This radio was factory assembled. This radio has visited the Elecraft factory a
few times over the years for updates and improvements.
Case of the radio is clean with
I have long been using my K3 remotely and I have wished for a simple way to
view my P3 via remote.
I just found a solution that is working nicely.
I bought a $20 Wyze Cam 2 which is a 2.4 Ghz webcam with an app for my phone.
The Wyze cam will focus closely on the P3 giving me a full screen
,
Be certain the control cable between the KPA1500 RF deck and the power
supply is seated properly and the jackscrews tightened. The fact that
the KPA1500 power switch does nothing is an indicator that the cable may
have some problem.
73,
Don W3FPR
On 2/17/2019 6:41 PM, paule408--- via Elecraft wrote
Last August, I had my KPA1500 repaired by Elecraft as one PA transistor failed.
They replaced both PA transistors and sent it back to me under warranty. Only
the RF deck was shipped to Elecraft. The KPA1500 power supply stayed home
unplugged during this time,.
I kept using my backup Amp until
I have two KPA500 amplifiers that I use with a remote station. Both have the
latest firmware.
I have these configured to go into Operate mode when powered on, however I have
many issues getting this setting to "stick". In other words, when remotely
powered on, they come up in Standby despite
I have the following items for Sale:
1) Elecraft K3 serial # 556.Elecraft, factory made, recently serviced and
calibrated.This radio has never left my non smoking shack (no DXpeditions)
Recently had numerous updates at Elecraft factory.
Single receiver.
Price is $1250 or best offer.
2) Elecraft
For the Elecraft "brain trust"
I have a K3, P3 and KAT500 that I am about to sell.
How do I inventory the K3 so that I can list what options and filters it has?
Is there a way to do this from the menus short of taking the cover off?
Thanks,
Paul n6psep...@n6pse.com
I've managed to get my KAT500 working again. I am trying to set up the
following from within the KAT500 utility:
Antenna 1 for bands 6-40 meters (Steppir DB36)
Antenna 2 for bands 8-/160 (Dipole antenna)
Antenna 3 is not used.
Can someone guide me to how this can be established from the
I was careless when plugging in the 12V DC power to the rear of my KAT500
tuner and got a small spark when the DC power plug touched the tuner chassis.
Now, the tuner wont power on but the two red LEDs on the far right side light
up (#3 and Fault) when 12V DC is properly plugged in.
Does this
10 matches
Mail list logo