Re: "Rohn tower hardware is hot dipped galvanized steel. I'd take their
knowledge over any "tower guy" or any other person for that matter."Exactly!
The science of materials and their proper manufacturing and use is far too
complex to be summed up in an email or by statements like, "Material X
Re: "Rohn tower hardware is hot dipped galvanized steel. I'd take their
knowledge over any "tower guy" or any other person for that matter."Exactly!
The science of materials and their proper manufacturing and use is far too
complex to be summed up in an email or by statements like, "Material X
Re: "September has been fairly quiet. Only around 160 posts..." I can
fix that: What is the BEST antenna to use with my K??? Sorry, just couldn't
resist ;-) Mark, KE6BB
Original message From: Grant Youngman
Date: 9/13/19 10:58 AM (GMT-08:00) To: Szabó István
Wow, Mark! That was very interesting. It may explain a lot of grossly
inflated listings I've seen on eBay. Thank you.Mark, KE6BB
Original message From: Mark Goldberg
Date: 8/8/19 2:43 PM (GMT-08:00) To: David Gilbert
Cc: Elecraft Mailing List Subject: Re: [Elecraft]
AX
Re: "I believe this problem has been solved in Windows 10. I've not had a
problem with com ports changing with Windows 10 updates."This made me realize
that I have not seen com port reassignment on update on my Win 10 computers. I
have seen it in the past on my Win 7 computers. I also have m
...and the Attenuator should be off.Mark,KE6BB
Original message From: Dale Boresz Date:
7/31/19 4:37 PM (GMT-08:00) To: "Michael St.James" Cc:
Elecraft Subject: Re: [Elecraft] KX3 volume Hello
Michael,If you are listening on any band higher than 40m on the KX3, you
shouldp
John,Re: "Anytime I change the mode from LSB or USB on any band to CW it
starts to send a “dit” without stopping..."Take a look at the plug and jack.
Be sure there is no damage to the jack, and that none of the plug was left
behind in the jack. That happened to me once on a keyboard. A part
Re: "...and work like a bridge between the two network...Like this one for
example...I have been using a similar product (Netgear WINCE2001) for years on
my home alarm system with no problems. They add WiFi capability to any device
that has an Ethernet port. Be sure to follow the configuratio
Hank,I had a similar problem earlier this week following a Windows update.
The COM port showed up in Device Manager, but the software package I was using
(not the KX3 Utility) couldn't talk to it. Within a day or so, there was
another Windows update, and then everything worked fine.Sometim
Re: "Does anyone know of a non-synthesized transceiver that didn't have the CW
offset problem?"
My TenTec 540 doesn't have that problem, but my much older TenTec PM-3A does.
If my memory is correct, the Heathkit HW8 has the problem, but they fixed it in
the HW9 with a small capacitor that swi
Re: "...what is the old dual air coil Heathkit B-1balun, a current or voltage
type? If I remember correctly, they are 4:1 ratio."
From the Heathkit manual: "The Heathkit Balun Coil Set, Model B-1 is a
convenient transmitter accessory which has the capability of matching
unbalanced coax lines
Re: "It is as it just fell off!"
It probably did. It is likely the surface mount joints were solder starved
during original board processing. They can sometimes make surprisingly good
electrical contact, at least in low current applications. Without a careful
close examination with a good l
Re: "Spark plugs fire at 12,000 to 25,000 Volts. Some require as much as
45,000 V."
That is at the pressure inside the combustion chamber. At atmospheric
pressure, they fire at much lower voltages; however, Walter's point is still
valid. Turn on voltage is far more reliable with gas dischar
Mel,
That capability is available right now to hams using APRS if the radio
supports it. I do not use it that way since if I am using APRS I have text
messaging (chat) and I don’t really need a voice mode. As a minimum, an APRS
program can show you repeater locations along your route and
14 matches
Mail list logo
