I should of said I am on Page 36 of the Alignment and Test Part 1 so I think
that there is no output, I will check the board anyway, you never know. At
first I did find some points not soldered and took care of them. Still
checking and killing brain cells.
Not sure if the display goes blank
Rick,
The K1 display changes to a simulated bargraph to indicate the power
output when keyed. You will not have any power output at this stage of
assembly, so your statement of a 'blank display' may be just fine.
Since the backlight stays on during keying, I should retract my
statement
Well Don, I went back checked everything, every hole and every solder fleck.
Cleaned up pad solder joints and just verified all, did I mention I missed a
couple of holes. Plugged in the power and earbuds and I heard noise, tried
the keyer and it was making noise, backwards but dits and dahs. I
Rick, that is great news. There is a menu setting to reverse the
paddles for us lefties.
73,
Don W3FPR
Rick/WA6ES wrote:
Well Don, I went back checked everything, every hole and every solder fleck.
Cleaned up pad solder joints and just verified all, did I mention I missed a
couple of holes.
4 matches
Mail list logo
